Parts for Poulan XE835AR: Engine / Wheels / Housing / Handle Parts

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This genuine Husqvarna part is a hairpin cotter intended for use with Poulan, Husqvarna and Weed Eater brand walk-behind lawn mowers. This hairpin cotter, also known as a clip or hinchpin, is used to secure a component on a shaft in the lawn mower . This part is shaped like a bobby pin with a single piece of metal formed into a large ring at the top end, and a "W" shape at the other. This is designed to work with the groove or hole at the tip of a hitch pin, where this pin will lock larger pins in place. This part is an identical replacement for an original carrier bracket that is damaged, faulty, or missing. This dependable bracket carrier is made of high quality durable metal.This is an OEM replacement part sourced directly from the manufacturer and is sold individually. For installation information or hardware requirements, please refer to the original product manual. This part is a suitable replacement for a hairpin cotter in products from Husqvarna, Poulan, Weed Eater, Craftsman, Murray, Ariens, Ryobi, and other brands.

This part is a replacement retainer clip. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced retainer clip in lawn mowers and snowblowers. Retainer clips are a fairly standard piece of hardware that can be used to secure parts of the equipment but can also be quickly and easily removed for easy access to areas such as the engine. No special tools are required to replace this part. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this retainer clip, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this retainer clip is suitable for use on several different models of lawnmowers and snowblowers manufactured by Husqvarna and Poulan. Please This is a genuine part made of high-quality, durable metal and is sold individually.

This height adjuster knob is for lawn mowers. It attaches to the mower's height adjuster lever to adjust the lawn mower deck to the desired cutting height. Adjusting the lawn mower height ensures that the lawn is cut to the proper mowing height. The correct mowing height for a lawn depends on multiple factors, such as the type of grass species and the time of year. Height adjuster levers are typically made of metal, so the slightly rubberized height adjuster knob protects the operator during the adjustment process. The height adjuster knob's flat surface also prevents slippage during the adjustment process. The knob slides onto the lever and attaches without any clips, retainers, or screws. To remove the knob, pull it off. It might be challenging to remove. Due to the location of the height adjuster knob, wearing gloves is recommended when replacing the knob. This knob is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with lawn mowers made by Craftsman, Husqvarna, Weed Eater, Poulan, and Murray.

This shoulder bolt is a genuine Husqvarna part, sold individually. This shoulder bolt can be used as a replacement part or a string trimmer. The purpose of a shoulder bolt is to serve as a fastening component of a lawn mower or a string trimmer in conjunction with a nut, so several components within the infrastructure of the appliance are held together and secured in place.The shoulder bolt might be easily lost or misplaced or could be damaged over time. If the shoulder bolt is stripped, the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This shoulder bolt is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Ariens.

This part is a replacement wheel. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective wheel in lawn mowers.Wheels are essential to proper equipment usage as they allow the user to efficiently maneuver and control the lawn mower. Wheels are subject to significant wear and tear and thus may require replacement if flat, worn, detached, or rendered ineffective in any way. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this wheel, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This wheel can be used with different models of lawn mowers that have been manufactured by Husqvarna, Poulan, and other brands. Part sold individually.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.