Parts for Ge CDT765SSF7SS: Escutcheon & Door Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Replaces worn or missing dishwasher door mounting hardware and provides alignment template. Restores proper door fit, sealing, and operation. Verify fit.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Left-side hinge friction pad assembly for dishwashers. Installs on the door hinge to restore proper resistance. Replace if cracked, worn, or broken.

Right-hand hinge friction pad for dishwasher doors. Holds door open at set positions and controls swing. Replace if worn, cracked, or causing loose hinge.

Dishwasher door brace assembly that provides structural support to the inner door panel. Replace if the brace is cracked, bent, or broken.

If your dishwasher door feels hot or runs inefficiently, this door insulation panel restores thermal barrier. Fits inside door to reduce heat transfer.

Fix a loose, broken, or missing dishwasher door handle. This replacement handle restores proper opening and closing. Simple DIY installation.

Replacement mounting bracket that secures your dishwasher door handle. Needed when the original bracket is cracked, broken, or worn, causing loose handle attachment.

Fixes dishwasher display issues, blank screens, or unresponsive buttons. Replaces the control panel board. Moderate DIY repair, about 1 hour.

Console cover assembly for dishwashers. Protects and covers the control panel. Replace if cracked, discolored, broken, or damaged from heat exposure.

Transmits light from status indicators to the control panel display. Replace if broken, cracked, or lights are dim/not visible. Verify fit with model number.

Replace your dishwasher's door lens and adhesive assembly when the lens becomes cracked, broken, or cloudy. Installs on the control panel for a clean finish.

Fix a dishwasher that won't start, respond to buttons, or display cycles with this control panel. Handles all touch inputs and cycle selections.

The User Interface Housing is an OEM replacement part for GE dishwashers. Located at the front of the console, it houses the control panel responsible for cycle/option navigation.

The housing protects sensitive electronic components from water damage and physical impact. Its sturdy construction allows for responsive touch inputs without flex or play in the assembly. 

Symptoms of a bad user interface housing include:

• Warping or cracks exposing circuitry to damage
• Faulty sealing allowing moisture penetration
• Difficulty registering button presses from structural defects
• Ill-fitting installation negatively impacting usability

Causes can be repetitive openings allowing entry of dirt/moisture into critical areas and use over the years breaking down seals and weakening materials.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This is a replacement button used on the dishwasher's control panel. It allows you to select cycles, options, or activate specific functions on the front of the machine. Replace this button if it is cracked, stuck, or has broken off, making it difficult to operate the dishwasher controls.

10-32 x 9/16" machine screw secures dishwasher panels, brackets, and internal assemblies. Replace missing, stripped, or damaged fasteners to restore fit.

Fix intermittent controls, no-start issues, or cycles stopping when the door moves. This door wire harness assembly restores power and signal connections.

Replace your missing or damaged dishwasher toe kick insulation panel. Blocks drafts and protects internal components. Easy DIY installation repair.

Top attachment strip for your dishwasher tub. Secures the upper rack assembly to the tub opening. Replace if cracked, broken, or missing for proper fit.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Left-hand attachment strip secures trim and panels on your dishwasher for a clean, finished appearance. Replace if cracked, broken, or missing.

Secures your dishwasher door to the cabinet as a stable pivot point. Replace this bracket if cracked, broken, or worn to restore proper door alignment.

Secures and aligns the dishwasher door hinge assembly. Replace if your hinge bracket is cracked, bent, or broken to restore proper door fit and movement.

6-20 x 3/8 inch nickel screw secures trim panels, brackets, and small components in dishwashers and ovens. Replace missing or stripped screws.

This is the striker latch mounted on the dishwasher tub or frame that the door latch catches onto when the door is closed. It ensures the door locks securely so the dishwasher can begin its cycle. Replace this striker if the door won't latch properly, pops open during a cycle, or if the dishwasher won't start due to a door switch error.

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

Replaces the inner-facing panel of your dishwasher door. Restores a clean barrier and protects the outer assembly from damage, cracks, or heavy staining.

Fix a detergent door that won't open during wash cycles. This dishwasher dispenser module restores proper detergent and rinse aid release timing.

This is a cover that fits over the vent opening on a dishwasher, typically located on the inner door panel. It directs steam and moisture released during the drying cycle while protecting internal components. Replace this cover if it is cracked, warped, or missing, which can cause excessive steam escaping from the wrong area or poor drying performance.

Detergent not dispensing during wash cycle? This dishwasher detergent dispenser plate holds and releases detergent at the right time for proper cleaning.

Routes exhaust air from your dishwasher through the proper ventilation channel. Replace if damaged, crushed, or disconnected. Verify fit with your model.

Controls airflow in your dishwasher door. Replace if cracked or if you see leaking from the door vent area. Confirm fit with your model number.

Replacement vent and condenser fan assembly for dishwashers. Installs in the base to circulate air for drying. Replace if broken, cracked, or missing.

If your dishwasher isn't drying dishes properly or has excessive moisture buildup, the vent fan assembly may need replacement to restore airflow.

Right-hand door trim for dishwashers. Replaces cracked, chipped, or missing outer trim to restore appearance and protect the door edge.

Left-hand door trim restores your dishwasher's finished edge and appearance. Replace when cracked, dented, or missing to improve cosmetic look. Verify fit.

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.