Parts for Ge PSC23MGMBBB: 02 - Freezer Door Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Black side-by-side refrigerator door handle assembly. Replaces cracked, broken, or worn handles on fresh food or freezer doors. Installs on exterior door.

Replaces broken or cracked refrigerator door stop. Installs on door to limit swing range and prevent cabinet damage. Needed when missing or worn.

The Fresh Food Door Closure Cam is an OEM replacement part for GE refrigerators. It is a component located inside the fresh food door that works together with the door latch mechanism. The door closure cam has a pivoting arm that engages the latch to securely fasten the door shut when closed. For the same part in white, purchase WR02X10637.

Causes of failure include wear and tear over time from repeated usage, damage due to accidental mishandling of the door, or an impact that causes misalignment of the cam. 

Symptoms of a bad door closure cam include:

• The refrigerator door not closing properly
• A sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal leading to temperature inconsistencies

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Seals refrigerator door to prevent warm air entry and maintain cooling efficiency. Replace if cracked, loose, or causing poor seal. Confirm fit with model.

Replace your refrigerator's dairy door compartment and tray if cracked, broken, or missing. Installs on the door to organize butter and cheese.

Replacement door bin for side-by-side refrigerators. Mounts inside the door to organize condiments, jars, and beverages. Replace if cracked or broken.

This fixed module shelf supports and secures the refrigerator freezer control module and related electronics to prevent movement and vibration. It restores proper mounting and helps keep wiring and components stable. What it does

• Provides a stable mounting platform for the freezer control module and related circuit components
• Prevents module movement and vibration that can cause noise or intermittent connections
• Helps keep wiring and connectors routed away from moving parts and cold airflow
• Used when the original shelf is cracked, bent, or missing, causing loose electronics

• One fixed module shelf

• Disconnect power to the appliance before starting any work
• Handle electronics and connectors carefully to avoid damage from static or force
• Retain or replace mounting screws and clips as needed; inspect surrounding wiring routing

Replacement insert module for refrigerator door shelf assembly. Restores proper fit and support when original is cracked, broken, or missing.

Plastic retaining clip that secures drawer divider modules in place. Replaces broken, cracked, or missing snuggers to restore proper fit and separation.

Storage bin that mounts on the refrigerator door's inner panel. Holds condiments, bottles, and jars. Replace if cracked, broken, or missing tabs.

Plastic trim piece that frames the dairy compartment door on your refrigerator. Replace if cracked, broken, discolored, or missing for a clean finish.

Replace your refrigerator's butter dish lid. Covers and protects the butter compartment in your door. Order a new lid if yours is cracked or missing.

Black side-by-side refrigerator door handle assembly. Replaces cracked, broken, or worn handles on fresh food or freezer doors. Installs on exterior door.

Clear plastic insert that snaps into refrigerator door bins for organizing condiments. Replace if cracked, broken, or missing to restore shelf function.

This is a screw intended for use in refrigerators, specifically as the top mounting screw for the handle. If the screw in the handle is missing, stripped, or otherwise not performing its function, a replacement screw should be ordered.A visual inspection will determine if a screw is missing. If the door handle is loose or falling off from the top, it is a sign that a replacement screw is required. This repair is a quick and easy process. It involves the use of a screwdriver. Remove the old screw if there is one in place. Line up the holes on the door and the door handle component before twisting the new screw into position. Wear gloves to protect hands during the repair.This screw is a genuine OEM replacement part. It is sourced directly from the manufacturer. The screw is sold individually. The screw is compatible with several different models of refrigerators. It can be installed in ranges made by Electrolux, Frigidaire, Gibson, Westinghouse, and Kelvinator.

Replace missing or stripped refrigerator mounting screws. This fastener secures internal components and panels. Essential for proper assembly and fit.

Handle lock bracket for refrigerator doors. Secures handle locking mechanism in place. Replace if bracket is cracked, broken, or missing for proper fit.

Handle mounting retainer for refrigerator doors. Secures and stabilizes door handle assembly. Replace if cracked, broken, or missing to restore handle fit.

Replacement mounting screw for refrigerator panels, brackets, and hardware. Secures loose components and reduces rattling from missing or stripped screws.

Bushing that lines the upper hinge pin on refrigerator doors. Replace if cracked, worn, or missing to restore smooth door swing and proper alignment.

Replaces the worn or cracked hinge bushing at the bottom of your refrigerator door. Installs on the lower hinge pin for smooth door movement and alignment.