Parts for Bosch B20CS81SNB/01: Freezer Door Parts

This Bosch filter has an activated carbon media that is designed to reduce chlorine taste and odor, sediment, lead, mercury, and other impurities from your drinking water. Used on many Bosch refrigerators including the Evolution 500 Series model B20CS50SN, Evolution 800 Series model B20CS80SN, and the EVOLFLTR10 filtration system. For best performance, filter should be changed every 6 months or 400 gallons. Pressure range: 25-125 psi. Temperature range: 33-100 F. Flow Rate: 0.5 gallons per minute.

This replacement tray provides a durable receptacle that catches drips and holds small items in the appliance, restoring clean operation and preventing leaks or spills from reaching internal components. Easy to install and remove for cleaning. What it does

• Collects drips, crumbs, or small spills to protect the appliance interior
• Helps keep components dry and reduces risk of water-related damage
• Restores the original fit and function when a tray is cracked, warped, or missing
• Makes routine cleaning faster by providing a removable surface

• One replacement tray

• Disconnect power and water to the appliance before servicing
• Remove surrounding panels or racks as needed to access the tray; handle gently to avoid breakage
• Inspect mounting slots or tabs and align tray before seating fully into place
• Clean the tray with mild soap and water; avoid abrasive cleaners or high-heat drying

This fixture is a replacement component designed to restore proper fit and support where the original mounting or housing has worn or broken. It helps maintain secure alignment of adjacent parts for reliable appliance operation. What it does:

• Provides the structural support needed for the attached assembly or trim
• Replaces a cracked, broken, or missing fixture that causes misalignment or rattling
• Helps stop loose parts from shifting during operation and reduces unusual noises
• Restores correct fit to prevent leaks or poor sealing when applicable

• High-level replacement only; ensure appliance is unplugged or power is off before starting
• Use correct fasteners and avoid overtightening to prevent cracking
• Inspect surrounding parts and seals for damage while replacing this fixture

This replacement screw secures panels and components on compatible appliances, restoring proper fit and stopping rattles or loose parts. Use it when a factory screw is missing, stripped, or damaged to return assemblies to stable condition. What it does:

• Fastens panels, trim, brackets, or assemblies to restore secure mounting.
• Helps eliminate rattling, vibration noise, or loose-fitting parts.
• Replaces stripped, corroded, or missing fasteners that prevent proper component alignment.
• Works as the original-style screw specified by the manufacturer for the listed application.

• Disconnect power to the appliance before starting any repair.
• Use the correct screwdriver or bit to avoid stripping the screw head.
• Tighten until snug; avoid over-torquing which can damage threads or parts.
• Keep removed hardware and new screw in a safe place during reassembly.

This replacement oven interior lamp restores interior lighting so you can check food without opening the door. Fits compatible Bosch ovens that use a dedicated interior oven lamp. What it does

• Replaces a burned-out or dim oven light so you can see inside while cooking.
• Helps diagnose whether the issue is the bulb (vs. wiring or switch) when the interior light fails.
• Provides bright, focused illumination for monitoring baking and roasting.

• Disconnect power to the oven (unplug or shut off circuit) and allow the oven to fully cool before replacing the lamp.
• Remove the protective cover per your oven's service instructions; handle the bulb with a cloth or gloves to avoid oils on the glass.
• Verify the bulb seats securely and replace the protective cover before restoring power.

This replacement control console panel restores the outer cover that protects the appliance's control area and maintains a finished appearance. It helps keep buttons, display, and electronics shielded from spills and everyday wear. What it does

• Replaces a cracked, dented, or cosmetically damaged control panel to restore appearance.
• Protects underlying buttons, switches, and circuit components from moisture and debris.
• Helps ensure buttons and selector areas are properly supported for reliable operation.
• Common symptom: visible damage, loose or missing button surfaces, or exposed electronics.

• One control console panel.

• Disconnect all power (unplug or trip breaker) before beginning repair.
• Handle edges carefully; panels may have sharp metal or glass areas.
• Remove door/console trim and fasteners as needed—follow your model's service instructions.
• If the panel attaches to switches or display modules, verify connections before reassembly.

This genuine mounting holder secures internal components in place so parts stay aligned and operate quietly. It restores proper support for assemblies that have become loose or shifted over time. What it does:

• Provides a firm mounting point to hold internal assemblies in position
• Prevents rattling, misalignment, or binding caused by a loose bracket
• Helps maintain normal operation by keeping parts properly supported
• Commonly replaced when clips or supports are cracked, broken, or missing

• Inspect surrounding clips and fasteners; replace any that are damaged
• Disconnect power before servicing to avoid shock or injury
• Basic hand tools are typically required;