Parts for Ge PTG22LBMARBB: 01 - Freezer Door Parts

The Screw Package is an OEM replacement part for GE refrigerators. It contains a pack of 12 identical screws for miscellaneous securing and assembly needs.

These screws play a supporting role, helping attach shelf tracks, cover panels, door hinges, and other interior parts. By maintaining components securely in place, they help ensure smooth operation and prevent rattling or other noises. 

Symptoms of insufficiently secured parts include:

• Noises heard from loose shelves or door components  
• Detaching handles, hinges, or panels
• Shelves shifting positions or becoming misaligned

Causes of needing replacement screws can include loss, stripping, or wear over time from repeated securement and removal of parts during cleaning or repairs. 

This multipack of GE screws is perfect for minor refrigerator maintenance or to stock up on extras. They are also compatible with replacement hardware from Hotpoint, RCA, and certain Kenmore models. 

This freezer door gasket forms an airtight seal between the door and cabinet to keep cold air in and moisture out. Replacing a worn or damaged seal helps restore proper temperature, reduce frost, and improve energy efficiency.

• Seals the freezer door perimeter to maintain set temperature and airflow
• Helps reduce frost/ice buildup and condensation around the door opening
• May help if you notice warm spots, frequent frost, the door not staying shut, or visible gasket tears/gaps
• Reduces warm air infiltration that can cause long run times and temperature swings

• Unplug the refrigerator before servicing
• Warm the new gasket in hot tap water or with a hair dryer on low to make it pliable; seat the corners first
• Depending on the model, either press the gasket into the retainer channel or loosen and retighten inner-liner screws to secure—do not overtighten
• After installation, check the seal all around (dollar-bill test); gently warm and reshape any areas with gaps

This fixed mod shelf is a direct-fit freezer shelf assembly that restores storage stability and organization in compatible refrigerators. It replaces a broken or missing shelf so frozen items stay supported and accessible. What it does

• Provides a stable, stationary shelf surface for freezer storage.
• Replaces cracked, warped, or missing shelves that cause items to shift or fall.
• Restores original shelf spacing and support for proper organization.
• Helps prevent cold-air obstruction by maintaining intended shelf layout.

• One fixed mod shelf assembly.

• Unplug the appliance or disconnect power before installing.
• Remove food and any items from surrounding shelves before replacement.
• Installation typically involves aligning shelf supports and seating the shelf into place; basic hand tools may be helpful.
• Refer to the refrigerator owner's manual or service instructions for model-specific guidance and safe handling.

This replacement module shelf insert restores the shelf support that holds the refrigerator control module area and helps keep the shelf level and components secure. Fits into the module shelf to replace broken or missing inserts. What it does:

• Secures the control/module area so the module and wiring stay in place and out of direct contact with stored items
• Restores proper shelf alignment to prevent sagging or uneven loading
• Reduces rattling or noise caused by a loose or damaged shelf insert
• Helps protect the module area from minor impacts or shifting contents

• Disconnect power to the appliance before servicing to avoid electric shock.
• Remove the shelf or access panel per your owner's manual for clear access to the module shelf area.
• Snap or press the new insert into the designated slot until it seats firmly; verify fit and alignment.

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

This Mod tilt and insert (freezer) is the replacement tilt/insert mechanism used to secure and angle freezer inserts so they open and close smoothly. Restores proper positioning and support for the affected freezer insert. What it does:

• Holds and tilts the freezer insert/drawer to allow smooth opening and closing
• Keeps the insert properly aligned to prevent binding or uneven gaps
• Helps maintain consistent access to frozen items by stabilizing the drawer
• Addresses symptoms like a tilted, loose, or uneven freezer insert

• One Mod tilt and insert (freezer) part

• Basic hand tools may be required; follow manufacturer instructions for safe removal and replacement
• Disconnect power to the appliance before working on internal components
• Handle plastic parts gently to avoid cracking; confirm correct orientation before final fastening

This replacement screw fastens refrigerator components securely, restoring a tight, rattle-free fit when original hardware is missing, stripped, or corroded. Use it to secure panels, brackets, or trim and keep parts properly aligned.

• Secures panels, brackets, covers, or trim in place
• Helps maintain correct alignment of components and hardware
• Reduces vibration and rattling caused by loose or missing screws
• Replaces lost, rusted, or stripped screws

• Unplug the refrigerator and turn off water supply if working near water components
• Match thread and length to the removed fastener; hand-start threads to avoid cross-threading
• Tighten snugly; do not overtighten into plastic or thin sheet metal
• Keep track of any spacers or washers reused from the original assembly