Parts for Ge GWE19JGLAFBB: Freezer Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Freezer Drawer Gasket is an OEM part for GE refrigerators. This part is responsible for creating an airtight seal between the freezer door and the freezer compartment, preventing cold air from escaping the freezer, while also preventing warm air from entering. It helps maintain consistent temperatures inside the freezer, keeping your frozen foods fresh and preserved for longer.

A bad freezer drawer gasket can occur due to wear and tear, damage, or other factors. If you notice symptoms such as frost buildup, excessive condensation, or a decrease in freezer efficiency, it may be time to replace the gasket.

Symptoms of a bad freezer drawer gasket include:

• Frost buildup inside the freezer
• Excessive condensation on the gasket or freezer walls
• Decreased freezer efficiency

Restore your refrigerator's freezer drawer by replacing the faulty gasket with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This replacement screw secures appliance brackets, panels, and components. It restores a tight, aligned fit when the original hardware is stripped, rusted, or missing, helping reduce vibration and rattling for reliable operation.

• Fastens brackets, panels, or mounts to keep components secure and aligned
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration, rattling, or loose/misaligned parts
• Matches original spec for reliable hold and fit

• Disconnect power before servicing; use proper PPE
• Match thread and length to the removed screw before installation
• Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
• Ensure parts are aligned and seating surfaces are clean before tightening

This right-side freezer door bracket secures and positions the freezer door hinge so the door opens and closes smoothly and stays aligned. It helps restore proper door fit and prevents sagging or uneven gaps. What it does:

• Supports the freezer door hinge assembly and holds the door in correct alignment
• Helps stop door sagging and reduces rubbing or binding when opening/closing
• Restores a tight door fit to help maintain proper seal and cooling performance
• Can address symptoms like a misaligned, loose, or drooping freezer door

• One right freezer door bracket

• Disconnect power to the appliance before starting any repair
• Remove contents and, if needed, the freezer door to access the bracket
• Use proper tools and keep hardware organized; replace any damaged screws or fasteners

This left freezer door bracket secures the freezer door to the cabinet and helps maintain proper alignment for smooth opening and closing. Replaces a bent or broken bracket to restore door support and fit. What it does:

• Supports the freezer door at the hinge area to keep the door properly aligned.
• Prevents door sagging that can cause gaps or improper sealing.
• Restores stable hinge movement for easier opening and closing.
• Helps maintain an even seal to reduce warm air intrusion.

• Power and water: unplug the appliance and shut off water before starting work.
• Use basic hand tools; remove the door or hinge cover per OEM procedure before replacing bracket.
• Keep door supported during removal/installation to prevent injury or damage.

The Fastener Handle Assembly is an OEM part for GE refrigerators, specifically designed to securely attach the refrigerator or freezer handle to the door. This assembly includes the necessary components, such as screws or bolts, brackets, and possibly end caps, depending on the design, to ensure a sturdy and durable connection between the handle and the door. 

Causes for a Fastener Handle Assembly to fail include normal wear and tear from repeated use, excessive force applied to the handle, or corrosion of metal parts due to moisture and refrigeration environment.  

Symptoms of a bad Fastener Handle Assembly include:

• A loose handle that moves or wobbles when touched or used.
• Difficulty in opening the refrigerator or freezer door due to a compromised handle attachment.
• Visible damage or wear to the components of the fastener assembly 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Handle is an OEM part for GE refrigerators. It allows for easy opening and closing of the door. This handle is designed to provide a sturdy grip, making it convenient to access your food items.

A bad handle can be caused by wear and tear over time, excessive force applied to the handle, or damage due to accidental impact or mishandling.

Symptoms of a bad drawer handle include:

• Difficulty in opening or closing the door.
• Loose or wobbly handle.
• Cracks or breaks in the handle.

Replace your worn-out or damaged handle with this OEM part and restore your refrigerator. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.