Parts for Ge GWE19JGLAFBB: Freezer Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This replacement freezer ice bucket stores and dispenses ice made by your refrigerator's icemaker, keeping cubes contained and easy to access. It restores proper ice collection and makes removing or transferring ice quick and tidy. What it does:

• Holds and stores ice produced by the icemaker so cubes don't fall into the freezer compartment
• Guides ice from the icemaker into the bin to keep production flowing
• Prevents loose ice and reduces mess when removing ice for use
• Replaces cracked, warped, or missing ice bins that no longer contain ice properly

• One ice bucket

• Remove power to the refrigerator or switch icemaker to the OFF position before working near the icemaker
• Slide old bin out and lift the replacement into the same tracks or ledges; no special tools typically required
• Handle carefully to avoid cracking plastic; ensure bin seats fully so ice drops correctly from the icemaker
• If ice continues to spill or production stops after installation, check icemaker alignment and operation per the refrigerator service instructions

This lower basket slide is the replacement rail that supports and guides the dishwasher's lower rack for smooth in-and-out movement. It restores stable, aligned operation so the rack rolls without binding or sagging. What it does:

• Supports the lower dish rack and keeps it aligned on the track
• Guides smooth sliding motion to prevent sticking or uneven travel
• Replaces worn or bent slides that allow the rack to sag or come off track
• Helps eliminate grinding, catching, or noisy rack movement

• Remove power to the appliance before any service for safety.
• Inspect rack rollers and adjacent slide hardware; replace any damaged components.
• Simple hand tools are usually all that's needed; handle parts gently to avoid bending.

A replacement Phillips flat-head screw sized 10-14 x 3/4 inch for appliance assembly and panel fastening. Replaces worn or missing fastening hardware to keep panels, brackets, and components secure and aligned. What it does:

• Secures panels, trim, brackets, and internal components where a 10-14 x 3/4" Phillips flat-head screw is required.
• Restores proper fit and prevents rattling, vibration, or gaps caused by missing or stripped screws.
• Provides a direct hardware match for repairs calling for this screw size and head style.

• Disconnect power to the appliance before starting any repair work.
• Use the correct size Phillips screwdriver to avoid stripping the screw head.
• Tighten until snug; avoid over-tightening which can strip threads or crack panels.
• Replace any corroded or damaged mating hardware to ensure a secure fit.

This wire freezer lower basket replaces a worn or broken lower storage basket so you can keep frozen items organized and easy to access. It restores proper storage capacity and prevents items from falling into the lower compartment. What it does:

• Provides a sturdy, ventilated tray for holding frozen food in the lower freezer section
• Restores organized storage so items are easier to reach and won't slide into lower compartments
• Helps maintain airflow around frozen items for consistent cold exposure
• Commonly replaced when the original basket is cracked, bent, or missing

• One freezer lower basket

• Remove food and power down the appliance (unplug or switch off at the breaker) before servicing
• Slide or lift out the old basket per your freezer's access method, then set the replacement into the same guides or supports
• Avoid forcing the basket into place; it seats smoothly and moves freely on any tracks
• If mounting clips or rails are damaged, replace those parts separately

This right-side freezer drawer rail holder secures the drawer glide to the cabinet so the drawer opens and closes smoothly. A direct-fit replacement that restores proper drawer alignment and support. What it does:

• Supports the freezer drawer on the right side and keeps the glide in the correct position
• Guides the drawer during opening and closing to reduce sticking or uneven movement
• Replaces worn, cracked or broken rail holders that cause misalignment or noisy operation
• Works with the matching left rail holder to maintain even drawer travel

• Designed to install using existing cabinet and drawer hardware; verify orientation before fastening
• Power off and remove food and drawers before working to avoid injury or damage
• Handle plastic parts carefully to avoid cracking; use hand tools and avoid over-torquing
• If clips or screws are damaged, replace them with OEM-specified fasteners

This left-side freezer drawer rail holder secures the drawer rail so the freezer drawer opens and closes smoothly. Replaces a worn or broken holder to restore stable drawer tracking and prevent the drawer from sagging or binding. What it does:

• Supports the freezer drawer rail assembly and maintains proper alignment during sliding
• Keeps the drawer from tilting, catching, or coming off the track when opened or closed
• Replaces cracked, broken, or missing holders that cause noisy or uneven drawer movement
• Works with the rail system to help the drawer operate smoothly under normal load

• One left-side freezer drawer rail holder

• Disconnect power to the appliance before service to avoid electrical or injury risk
• Remove the freezer drawer and rail assembly per the manufacturer's instructions to access the holder
• Inspect mating rail and fasteners; replace any damaged clips or screws for a secure fit
• Use common hand tools;

This lower basket divider replaces a broken or missing divider on the dishwasher's lower rack to keep dishes organized and stable during the wash cycle. It restores proper spacing so items stay upright and wash more effectively. What it does:

• Separates and supports plates, lids and cookware in the lower rack to prevent shifting and contact during cycles
• Helps reduce rattling and banging caused by loose items during operation
• Restores proper rack layout when a divider is cracked, bent or missing
• Matches OEM fit and mounts to the lower rack for reliable placement

• Remove the lower rack to access the divider area; installation typically snaps into place without special tools
• Press the divider into the rack clips until it seats securely and check for stable fit before returning the rack to the dishwasher
• Inspect surrounding rack clips and tines for damage and replace if they won't hold the divider
• For safety, follow the dishwasher manufacturer's service instructions; disconnect power if working near electrical components

This is a replacement upper basket for the freezer compartment that restores shelf organization and keeps frozen items accessible. It fits into the freezer's upper seating area so you can store and separate smaller packages. What it does:

• Provides a dedicated storage area for frozen foods to prevent items from shifting during normal use.
• Keeps smaller packages visible and accessible so you don't have to dig through lower bins.
• Replaces a cracked, broken, warped, or missing upper basket that no longer holds items securely.
• Helps maintain airflow and organization inside the freezer when installed correctly.

• Always unplug the appliance or disconnect power before attempting any repair.
• Remove any contents from the freezer and clear the installation area before replacing the basket.
• Slide the basket into the upper tracks or seating until it seats securely; verify stability before loading.