Parts for Ge PSB48YPHASV: Freezer Door Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Fix a refrigerator that won't turn on or has door light issues with this microswitch. Common repair for failed switches. Moderate DIY difficulty.

Water line cap tube for refrigerators. Connects water supply lines in the refrigeration system. Replace if cracked, leaking, or damaged during repairs.

If your refrigerator interior light won't turn on or flickers, a faulty light socket is often the cause. This replacement socket restores reliable lighting.

Replace your refrigerator's ice dispenser door chute funnel if cracked, broken, or missing. This component directs ice from dispenser to glass.

Illuminates water and ice dispenser area for visibility in low light. Replace when bulb burns out or dispenser area stays dark. Confirm fit with model.

This strike switch is a door-latch sensing switch that completes the circuit when the door is closed, ensuring the appliance detects latch position and enables associated functions. It replaces a worn or failed switch to restore proper door sensing. What it does

• Detects when the door latch/strike engages and sends the on/off signal to the appliance control
• Prevents functions that require a closed door from running when the door is open
• Commonly fails from wear or corrosion on contacts or broken actuator
• Symptoms of failure: appliance functions not starting, interior light or controls not responding, or door-dependent features not operating

• One strike switch

• Disconnect power to the appliance before starting work to avoid shock
• Access typically requires removing a door panel or control housing; retain all fasteners and note wire locations
• Disconnect wiring harness and replace with same-terminal connections; do not force connectors
• Test door operation and related functions after reassembly

Door stop assembly that secures and positions your refrigerator door. Replace if the original is cracked, broken, or missing to restore proper door alignment.

Replace your refrigerator freezer door gasket to restore proper sealing and energy efficiency. Fixes air leaks and frost buildup. Confirm fit with your model number.

This dispenser trim is the external bezel that surrounds and finishes the refrigerator dispenser area, restoring a clean look and protecting the dispenser opening. It fits the dispenser opening and matches black trim styling. What it does:

• Provides a finished, protective bezel around the water/ice dispenser opening
• Helps keep the dispenser cavity sealed from dirt and moisture
• Restores proper appearance when original trim is cracked, scratched, or missing
• Keeps dispenser controls and chute edges covered for safer use

• Turn off power to the appliance before servicing to avoid electrical hazards
• Replace using the original trim clips or screws; handle clips gently to avoid breakage
• Align tabs and snap or fasten into place without forcing; verify secure fit before restoring power

Fixes inconsistent cooling or frost buildup caused by faulty temperature sensing. This refrigerator defrost thermostat restores accurate readings.

Black grille recess for refrigerator drip pan and drain trough assembly. Replaces cracked, broken, or missing grille recesses in the drain system.

Upper hinge shim for refrigerator door alignment. Replaces worn, cracked, or missing shims that cause door misalignment or uneven gaps.

Replace your cracked, broken, or missing refrigerator door handle assembly. Restores door functionality and appearance. Direct fit installation.

This lower freezer chassis door replaces the worn or damaged lower access/trim panel at the front of the freezer compartment, restoring a sealed, finished appearance and helping direct airflow inside the compartment. What it does

• Covers and protects the lower freezer chassis and internal components from debris and damage
• Helps channel airflow and maintain proper internal layout for consistent cold performance
• Eliminates rattles, gaps, or loose trim caused by cracked or broken panels
• Restores the refrigerator's finished interior look

• One lower freezer chassis door

• Disconnect power to the appliance before beginning any repair
• Remove any food and shelving that block access to the lower freezer area
• Handle carefully to avoid scratching or cracking the new panel during installation
• Basic hand tools (screwdriver, trim tool) may be required;

A small locking retainer that secures push-fit fittings and tubing to prevent disconnection and leaks. Replaces a worn or broken clip to restore a secure connection on the water/ice plumbing assembly. What it does:

• Holds push-fit or slip fittings firmly in place to stop tubing from slipping free
• Helps prevent water leaks caused by loose or damaged retainers
• Restores proper alignment of the inlet/outlet plumbing connections
• Commonly used where a quick-release fitting needs a secondary lock

• One clip fitting lock

• Disconnect power and turn off the water supply before servicing plumbing components
• Remove the old clip and push the new clip into place until the fitting is fully retained
• After installation, restore water and power and check the connection for leaks

Upper thimble hinge secures the refrigerator door pivot point for smooth opening and closing. Replaces cracked, broken, or worn hinge parts that cause door misalignment or sagging.

Self-tapping screw for refrigerator interior panels, shelves, or housings. Replaces lost, stripped, or damaged screws during repairs or reassembly.

A self-tapping screw used to fasten appliance components where a threaded hole is not present. It provides a secure connection for panels, brackets, or internal assemblies to restore proper fit and reduce movement. What it does:

• Cuts its own mating thread as it is driven, securing plastic or thin metal components
• Holds panels, brackets, or assemblies in place to prevent rattling and misalignment
• Restores proper attachment when original screw is stripped, missing, or damaged
• Helps maintain electrical and mechanical component positioning for safe operation

• Use the correctly sized screwdriver or driver bit to avoid cam-out or head damage
• Drive straight and avoid over-torquing to prevent cracking or stripping the mating material
• If working near electrical components, disconnect power before servicing
• Replace like-for-like with the same part number to ensure proper fit and function