Parts for Electrolux EI28BS65KSCA: 02 - Freezer Drawer, Baskets Parts

The Refrigerator Door Gasket is an OEM replacement part for Frigidaire refrigerators. It forms a seal around the refrigerator door, keeping cold air inside and preventing warm air from entering. This helps maintain consistent temperatures inside the appliance, ensuring optimal food preservation and energy efficiency.

Causes of a bad gasket can include regular wear and tear, exposure to temperature fluctuations, or damage from cleaning agents. Over time, the gasket may lose its elasticity or develop cracks, compromising the refrigerator's seal and performance.

Symptoms of a bad gasket include:

• Difficulty in keeping the refrigerator door closed securely
• Excess condensation or frost buildup inside the refrigerator
• Warm spots or inconsistent cooling in the appliance
• Increased energy usage due to the refrigerator running more frequently

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replacement screw used to secure trim, brackets and panels on compatible Frigidaire appliances. Restores proper fit to reduce rattling and keep components from coming loose for safer, more reliable operation. What it does

• Secures panels, trim pieces and small brackets so parts stay aligned and flush.
• Stops rattling or vibration caused by missing or loose fasteners.
• Prevents components from shifting or falling out during normal use.
• Works wherever the OEM screw specified by the appliance diagram is required.

• Disconnect power (and water, if applicable) before starting any repair.
• Use the correct driver and size to avoid stripping the head or threads.
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic.
• If the new screw does not seat properly, confirm this is the correct OEM part before forcing it.

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

A single replacement mounting screw used to secure trim, panels, or components on compatible Frigidaire appliances. Restores a lost or stripped fastener so panels and parts sit firmly and safely. What it does

• Secures trim pieces, control panels, brackets, or small appliance components
• Replaces missing or damaged screws that cause loose or rattling parts
• Helps restore proper alignment so doors and panels close and seal correctly
• Useful when reassembling after maintenance or part replacement

• Inspect matching hole and threads; replace with like-size screw to avoid damage
• Use correct screwdriver or driver bit to prevent stripping the head
• Do not overtighten; snug until secure
• Disconnect power to the appliance before accessing internal panels or components

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

This wire freezer basket provides a removable storage bin for organizing frozen foods and maximizing usable freezer space. It replaces a broken, missing or warped basket so items stay contained and accessible. What it does:

• Holds and organizes frozen food items to prevent clutter and make retrieval easier
• Slides or lifts out for convenient loading, unloading and cleaning
• Stops items from falling into lower compartments or vents
• Restores secure storage when original basket is cracked, bent or missing

• One wire freezer basket

• Typically installs without tools—lift into place on freezer rails or hooks;
• Handle edges carefully to avoid pinches; wear gloves if needed
• Verify fit and orientation before loading heavy items
• If freezer shelves or rails are damaged, replace them first to ensure proper basket support

This lower basket kit replaces a damaged lower dish rack to support plates, bowls and cookware in the dishwasher and restore proper loading and cleaning. It provides a stable, organized lower rack for everyday dishwashing. What it does

• Holds and separates dishes, bowls and cookware in the dishwasher's lower cavity for thorough washing.
• Restores proper rack alignment and stability when tines are bent or sections are damaged.
• Replaces worn or missing lower rack components that cause noisy rolling or improper drainage.
• Helps prevent dishes from contacting the spray arm or each other during wash cycles.

• One lower basket kit.

• Remove power and empty the dishwasher before replacing the rack.
• Slide out the old lower rack and set the new kit into the lower track; wheels/tines typically snap into place.
• Inspect for sharp edges or rust; replace the kit if structural corrosion is present.

This slide assembly restores smooth support and guided travel for a freezer or range storage drawer, helping the drawer open and close evenly and preventing sagging or binding. Fits the factory mounting locations and replaces a worn or damaged slide. What it does

• Guides and supports the storage/drawer so it opens and closes smoothly
• Prevents drawer sagging, sticking, or uneven movement
• Restores proper alignment and load support for safe operation
• Reduces noise from worn or bent slide components

• Disconnect power (for ranges) or remove food and drawers before servicing (for refrigerators) to avoid injury
• Remove the drawer to access mounting screws; typically requires basic hand tools
• Inspect mating brackets and fasteners; replace any damaged hardware for a secure fit
• Do not force parts; confirm correct orientation and engagement before reassembly

This right-hand wire basket slide supports and guides the basket as it opens and closes. Replace it if the basket binds, tilts, or no longer glides smoothly due to a worn, cracked, or broken slide.

• Provides the track for the basket to slide in and out on the right side
• Helps keep the basket aligned and stable within the compartment
• Common symptoms: sticking or uneven travel, basket tilts/drops on one side, visible cracks or damage
• Restores smooth operation and proper support for the wire basket

• Disconnect power and remove the basket and contents before starting
• Remove screws or clips securing the old slide; retain fasteners for reuse
• Align and secure the new slide in the same mounting locations
• Reinstall the basket and verify smooth operation before loading

This slide assembly is the drawer glide that lets a refrigerator/freezer drawer open and close smoothly, restoring proper support and alignment for effortless access and secure operation. What it does

• Replaces a worn or broken drawer glide to restore smooth sliding action and prevent drawers from binding or falling.
• Supports the drawer track so the drawer stays aligned and inserts fully without catching.
• Reduces noise and grinding when opening or closing a drawer.
• Common symptoms: drawer sticks, drops, tilts, or feels loose when pulled.

• Unplug the appliance or disconnect power before servicing the drawer area.
• Empty the drawer and remove any front panel or stops as needed to access the slides.
• Inspect mounting points for damage; align the slide and secure fasteners snugly without over-tightening.
• Test the drawer travel after installation and re-secure any trim or stops.

This retainer is a small mounting clip that secures internal components and trim to keep panels and assemblies aligned during normal use. It restores secure fitment and reduces movement or rattling from loose parts. What it does:

• Holds panels, trim, or small assemblies in place to prevent shifting and vibration
• Helps stop rattling or buzzing caused by loose internal components
• Keeps parts aligned so doors, drawers, or panels operate smoothly
• Replaces cracked, broken, or worn clips that no longer grip reliably

• Disconnect power to the appliance before inspecting or replacing parts
• Remove surrounding panels or trim as needed to access the retainer; keep screws/fasteners for reassembly
• Snap the clip into the mating slot or tab until it seats; replace any damaged mounting points
• Replace all adjacent clips for consistent fit

This replacement part is a set screw, and it is intended for use in different types of appliances. This is a genuine replacement part made by Frigidaire. This screw set is compatible in many different areas of the appliance. Screws are typically used for keeping parts of the machinery secure and in place. It is possible that screws can become loose over time and need to be replaced. A new screw set might be needed if the user notices parts of the appliances are becoming loose or are falling off. This can be due to screws becoming stripped over time or if the appliance is bumped during transport. It is typically easy to replace screws. Simply remove the old screw and replace it with a new part. The only tools needed for this repair are a screwdriver and possibly pliers if the damaged screw is stuck in place.Note that this is a genuine OEM replacement part and is sourced from the manufacturer. This set screw is sold individually.

The Door Handle Screw is an OEM part for Frigidaire refrigerators. This screw secures the door handle to the refrigerator door, ensuring a firm and stable grip for opening and closing the door.

Causes of a bad door handle screw can include regular wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or stripping. A faulty screw can lead to a loose or wobbly door handle, making it difficult to operate the refrigerator.

Symptoms of a bad door handle screw include:

• The door handle feeling loose or coming off
• Difficulty in securely tightening the handle
• Visible rust or corrosion on the screw
• Stripped threads on the screw or handle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This OEM-style refrigerator shelf divider keeps items separated and organized so groceries stay in place and drawers/shelves stack neatly. It replaces a cracked, warped, or missing divider to restore proper storage separation. What it does:

• Separates food and containers to prevent shifting and contact between items
• Restores intended shelf/drawer organization and usable space
• Helps keep contents from sliding when doors open or close
• Useful when the original divider is cracked, broken, or missing

• One replacement divider

• High-level replacement: remove the shelf or drawer as needed, align the divider in its mounting slots, and press into place
• Use caution handling glass shelves or sharp edges; wear gloves to protect hands
• Check fit and alignment before returning contents to avoid interference with door or drawer movement
• If mounting clips or tracks are damaged, replace those parts rather than forcing the divider

This interior divider separates and organizes items on a refrigerator shelf or inside a drawer so food stays orderly and doesn't shift during normal use. It restores the original partitioning function of the compartment. What it does:

• Provides a stable partition to separate foods and containers
• Keeps items from sliding together or tipping when the door or drawer is opened
• Replaces cracked, warped or missing dividers that no longer hold position
• Restores intended organization and usable space of the shelf/drawer

• Fits into the shelf or drawer track; no tools generally required for removal or reinstallation
• Inspect surrounding clips or tracks for damage and clean area before installing
• Handle gently to avoid cracking the plastic; align tabs and press until secure

This support beam is a structural cabinet brace that stabilizes the refrigerator's interior frame and restores proper alignment of doors, drawers and shelves, helping reduce sagging, vibration and unusual noises. What it does:

• Reinforces the cabinet/frame so internal components stay square and aligned
• Helps prevent doors and drawers from sagging or binding
• Reduces rattling or vibration caused by a bent or missing brace
• Common symptom indicators: visible bend or gap, uneven door fit, or persistent noise from the cabinet area

• Disconnect power and remove food/contents from the affected area before starting any repair
• Basic hand tools typically required; follow the manufacturer's service manual for correct fastener torque and placement
• Handle carefully to avoid scratching the finish; inspect surrounding mounting points and replace damaged fasteners as needed

This support beam is the structural rail that supports a refrigerator shelf and its pantry/drawer assembly. Replace a cracked or missing beam to restore level support, prevent sagging, and keep drawers operating smoothly.

• Spans the compartment to support the shelf/pantry frame and distribute weight
• Keeps the shelf level and stable under load
• Helps maintain proper alignment for attached drawers or bins
• Common symptoms: shelf tilts or sags; drawers bind, scrape, or drop
• Visible cracks, broken tabs, or a missing beam

• Disconnect power before servicing
• Remove food items, the shelf/frame, and any drawers or bins supported by the beam
• Release the beam from locking tabs or fasteners and remove the old part
• Seat the new beam fully in the mounting points, then reinstall the shelf and drawers and check for level

This door handle bar lets you grip and open the appliance door smoothly. It restores a secure, comfortable handle when the original bar is loose, worn, or damaged, helping the door operate as intended.

• Provides a sturdy handhold to open and close the door
• Replaces a loose, cracked, or missing handle bar
• Helps ensure proper door operation and user safety
• Cosmetic refresh for a worn or scuffed handle area

• Unplug the appliance before servicing
• Use the correct screwdriver/hex driver per your model's fasteners
• Support the door while loosening and tightening handle screws
• Do not overtighten; align and snug evenly to avoid damage

This tilt-out rack is the refrigerator door shelf that holds small items and lets you access them easily by tilting forward. It restores secure storage on the door and keeps items from falling when the shelf is damaged. What it does:

• Provides a shallow, front-tilting shelf for small containers, butter, or condiment storage
• Keeps door-stored items contained and easy to reach
• Replaces cracked, warped, or broken door shelves that cause items to fall
• Restores proper fit and function so the door closes smoothly

• Remove all items from the door and work with the door open on a stable surface
• Tilt or lift the old rack out per the OEM door-shelf removal method; avoid prying with metal tools
• Handle edges carefully; some racks and mounting clips can be sharp or brittle
• Follow the refrigerator manufacturer's instructions for reinstallation and parts compatibility

This freezer drawer bracket secures and supports the freezer drawer, keeping it aligned and stable for smooth operation. It replaces a worn or broken bracket to stop drawer sagging and misalignment. What it does:

• Holds the freezer drawer in place and supports the drawer track
• Restores proper drawer alignment for smooth opening and closing
• Helps eliminate drawer sag, catching, or uneven movement
• Works with factory mounting points to maintain intended fit

• Disconnect power before starting and remove food from the drawer area
• Remove the drawer and any trim panels to access the bracket mounting screws
• Reuse original fasteners unless specified otherwise; align bracket before tightening

This timing bar is a replacement mechanical link used in the appliance's timing assembly to transfer motion between timer components. It helps restore proper cycle advancement and reliable mechanical timing movement. What it does

• Transfers motion between timer gears and linked components to advance cycles
• Restores consistent mechanical timing action when a worn or broken bar prevents cycle changes
• Commonly replaced when the timer fails to engage or advance smoothly
• Works as a direct-fit replacement for the original timing linkage on compatible units

What's included

• One timing bar (1 count)

Install notes

• Disconnect power before servicing to avoid shock or unexpected motor operation
• Inspect surrounding cams, gears, and mounting hardware; replace any damaged parts for reliable operation
• Handle small components carefully to avoid bending the bar or misaligning timing engagement

This replacement basket trim restores the finished edge and secure fit of a dishwasher basket, helping prevent rubbing and keeping dishes positioned for proper cleaning. It replaces worn or cracked trim for a neater, safer rack. What it does:

• Covers and protects the edge of a dishwasher basket to reduce wear and snagging
• Helps keep the basket aligned and items from catching on the rack
• Restores a finished appearance to a worn or damaged basket edge
• Simple, passive part that prevents small movement and chipping of dishware

• One basket trim piece

• Disconnect power and water to the appliance before starting any repair
• Most trims snap or slide onto the basket; remove the rack to access the damaged area
• Use basic hand tools if clips or screws are present; avoid forcing parts to prevent breakage
• If clips are broken, inspect neighboring fasteners and replace as needed for a secure fit

This 3/32" screwdriver is the service tool used to access and adjust small screws on appliances, making routine panel and control adjustments easier and more precise. Handy for basic repairs and maintenance. What it does:

• Fits 3/32" slotted screws commonly found on control panels, trim, and small fasteners
• Allows removal and installation of small service screws for access to internal components
• Helps correct loose screws that can cause rattling or misaligned panels
• Provides better fit than oversized drivers to reduce screw head damage

• Always disconnect power to the appliance before performing service or repairs
• Use the correct 3/32" blade size to avoid stripping screw heads
• Apply steady pressure and avoid excessive torque; use hand force only unless otherwise specified

The Screw is an OEM part for Frigidaire refrigerators. As a common fastener used throughout the appliance, screws hold panels, handles, components and more securely in place. Reliable performance depends on intact assemblies.

Causes of a bad screw can include wear and corrosion over time from constant vibration, as well as stripping or shearing from repeated securing and removal of parts during repairs.

Symptoms of a loose, damaged, or missing screw include:

• Rattling noises and vibration
• Doors, handles, or panels that are no longer flush or tightened securely
• Internal components that have shifted position

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances

This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:

• Secures panels, trim, or internal components to maintain proper alignment and stability.
• Stops rattling or vibration caused by loose or missing hardware.
• Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
• Small hardware solution for common fit and finish issues.

• Disconnect power and any water supply before starting work.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Keep track of small parts and work on a stable surface; magnetic trays help.

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed