Parts for Electrolux EW28BS85KSDA: 02 - Freezer Drawer, Baskets Parts

Forms an airtight seal around your refrigerator door to keep cold air in and prevent temperature loss. Replace if torn, cracked, or not sealing properly.

NOTE - Due to manufacturer changes gasket is only available in light grey and may differ from the photo shown.

Replacement storage drawer for your refrigerator. Installs in fresh food or freezer compartment. Needed when original drawer is cracked or broken.

Replace your broken or cracked refrigerator door handle. This exterior handle installs on the door to provide a grip for opening and closing your unit.

Replacement mounting screw secures trim, brackets, and panels inside your refrigerator. Restores proper fit when original screws are missing or stripped.

Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.

Single mounting screw secures trim, panels, or brackets inside your refrigerator. Replace lost, stripped, or damaged screws to keep components firmly attached.

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

Wire freezer basket for bottom-mount refrigerators. Organizes frozen foods in a removable bin. Replace if your basket is cracked, broken, or missing.

This lower basket kit replaces a damaged lower dish rack to support plates, bowls and cookware in the dishwasher and restore proper loading and cleaning. It provides a stable, organized lower rack for everyday dishwashing. What it does

• Holds and separates dishes, bowls and cookware in the dishwasher's lower cavity for thorough washing.
• Restores proper rack alignment and stability when tines are bent or sections are damaged.
• Replaces worn or missing lower rack components that cause noisy rolling or improper drainage.
• Helps prevent dishes from contacting the spray arm or each other during wash cycles.

• One lower basket kit.

• Remove power and empty the dishwasher before replacing the rack.
• Slide out the old lower rack and set the new kit into the lower track; wheels/tines typically snap into place.
• Inspect for sharp edges or rust; replace the kit if structural corrosion is present.

Replacement clip secures refrigerator storage baskets in place. Needed when the original clip is cracked, broken, or missing, causing baskets to shift.

Secures trim, panels, and small components inside your refrigerator. Replace if cracked, broken, or missing to restore proper fit and eliminate rattling.

Replacement drawer slide assembly for refrigerator or freezer drawers. Guides and supports drawers for smooth operation. Replaces cracked or worn slides.

This slide assembly restores smooth support and guided travel for a freezer or range storage drawer, helping the drawer open and close evenly and preventing sagging or binding. Fits the factory mounting locations and replaces a worn or damaged slide. What it does

• Guides and supports the storage/drawer so it opens and closes smoothly
• Prevents drawer sagging, sticking, or uneven movement
• Restores proper alignment and load support for safe operation
• Reduces noise from worn or bent slide components

• Disconnect power (for ranges) or remove food and drawers before servicing (for refrigerators) to avoid injury
• Remove the drawer to access mounting screws; typically requires basic hand tools
• Inspect mating brackets and fasteners; replace any damaged hardware for a secure fit
• Do not force parts; confirm correct orientation and engagement before reassembly

Replace your refrigerator drawer slide assembly to restore smooth gliding and prevent binding. Guides drawers evenly on their track. Confirm fit with your model.

This slide assembly is the drawer glide that lets a refrigerator/freezer drawer open and close smoothly, restoring proper support and alignment for effortless access and secure operation. What it does

• Replaces a worn or broken drawer glide to restore smooth sliding action and prevent drawers from binding or falling.
• Supports the drawer track so the drawer stays aligned and inserts fully without catching.
• Reduces noise and grinding when opening or closing a drawer.
• Common symptoms: drawer sticks, drops, tilts, or feels loose when pulled.

• Unplug the appliance or disconnect power before servicing the drawer area.
• Empty the drawer and remove any front panel or stops as needed to access the slides.
• Inspect mounting points for damage; align the slide and secure fasteners snugly without over-tightening.
• Test the drawer travel after installation and re-secure any trim or stops.

Mounting clip that secures internal panels and trim in your refrigerator. Replaces broken, cracked, or missing retainers that cause loose or rattling parts.

Drawer slide assembly for refrigerators. Installs on drawer or shelf to enable smooth gliding motion. Replace if cracked, broken, or causing drawers to stick.

Replace a stripped, missing, or damaged set screw that secures refrigerator or freezer door handles. Requires 3/32" allen wrench for installation.

Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.

Shelf divider that separates and organizes items inside your refrigerator. Installs on shelves or in drawers. Replace if cracked, warped, or missing.

Plastic shelf divider that organizes items in your refrigerator compartment. Replace if cracked, broken, or missing to restore proper food separation.

Interior divider that separates and organizes items on refrigerator shelves or inside drawers. Replaces cracked, broken, or missing dividers.

Structural cabinet brace that stabilizes your refrigerator's interior frame. Replace if cracked, bent, or broken to restore proper alignment of doors.

Structural rail that supports refrigerator shelves and pantry drawer assemblies. Replace if cracked, broken, or missing to restore level support.

Replacement door handle bar for your refrigerator. Installs on the door to provide a sturdy grip. Needed when original is loose, cracked, or damaged.

Tilt-out door rack for refrigerator that holds small items with forward-tilting access. Replace if cracked, broken, or no longer secures items properly.

Mounting bracket for refrigerators. Secures internal components in place. Replace if bracket is bent, cracked, or missing to restore proper support.

This timing bar is a replacement mechanical link used in the appliance's timing assembly to transfer motion between timer components. It helps restore proper cycle advancement and reliable mechanical timing movement. What it does

• Transfers motion between timer gears and linked components to advance cycles
• Restores consistent mechanical timing action when a worn or broken bar prevents cycle changes
• Commonly replaced when the timer fails to engage or advance smoothly
• Works as a direct-fit replacement for the original timing linkage on compatible units

What's included

• One timing bar (1 count)

Install notes

• Disconnect power before servicing to avoid shock or unexpected motor operation
• Inspect surrounding cams, gears, and mounting hardware; replace any damaged parts for reliable operation
• Handle small components carefully to avoid bending the bar or misaligning timing engagement

Plastic end cap that covers the end of refrigerator shelf support bars. Replace if cracked, broken, or missing to restore a finished look.

Door rack end cap for refrigerators. Installs on the end of door storage racks to secure and finish the assembly. Replace if cracked, broken, or missing.

Replaces worn, cracked, or missing basket trim on refrigerator baskets. Restores the finished edge and secure fit to prevent rubbing and damage.

3/32" blade screwdriver for accessing and adjusting small screws on appliance control panels and trim. Essential for maintenance and repairs.

Mounting screw for refrigerator assembly. Secures components and panels inside your appliance. Replace if screw is stripped, missing, or damaged.

Lock pin that secures refrigerator drawers and shelves in place. Replace if the pin is broken, missing, or won't hold drawer components securely anymore.

This is a service wrench used to loosen and tighten appliance fasteners for maintenance and repairs, making access and part replacement easier for technicians and DIYers. Durable tool designed for specific appliance fastener sizes. What it does:

• Provides the correct fit and leverage for removing or installing designated appliance nuts, bolts, and fittings
• Helps safely access internal components during service and part replacement
• Reduces risk of rounding fasteners compared with improvised tools
• Useful for routine maintenance tasks and repair procedures that require a dedicated wrench

• One wrench

• Use the wrench only for its intended appliance fasteners; avoid excessive force
• Disconnect power and water to the appliance before beginning service
• Wear safety gloves and eye protection when working on appliances

Mounting screw for refrigerator panels, handles, and internal components. Replace stripped, corroded, or missing screws to secure assemblies properly.

Mounting screw for refrigerator components and panels. Replaces lost, stripped, or damaged screws. Essential hardware for secure assembly.

This replacement screw fastens appliance panels and trim to restore secure fit and reduce rattling or movement. Use it when a missing or damaged screw is causing loose parts or noisy operation. What it does:

• Secures panels, trim, or internal components to maintain proper alignment and stability.
• Stops rattling or vibration caused by loose or missing hardware.
• Helps prevent gaps that can catch on clothing or obstruct doors/drawers.
• Small hardware solution for common fit and finish issues.

• Disconnect power and any water supply before starting work.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Keep track of small parts and work on a stable surface; magnetic trays help.

Machine screw secures panels, trim, and internal brackets in your refrigerator. Replace worn, stripped, or missing fasteners to keep components aligned.