Parts for Ge FCM7SUCWW: 01 - Freezer Parts

This top cover hinge secures the upper access cover on compatible refrigerators, keeping the cover aligned and stable for reliable operation and easy access during maintenance. It restores proper fit and prevents rattling or loose covers. What it does:

• Supports and fastens the refrigerator's top access cover to the cabinet
• Keeps the cover properly aligned to prevent gaps and vibration noise
• Restores secure cover movement after wear or damage to the original hinge
• Helps maintain a sealed fit so panels sit flush and access remains safe

• Disconnect power to the appliance before beginning any repair
• Installation typically requires basic hand tools (screwdriver, nut driver); retain original fasteners unless replacements are supplied
• Align the cover on the hinge before tightening screws; avoid over-torquing hardware

Color: white. Measures about 9 inches wide by 7-1/2 inches high by 17 inches deep.

This interior drain plug seals and directs defrost and condensation water into the refrigerator drain channel to help prevent leaks and pooling inside the cabinet. Replacement restores proper drainage and reduces standing water near drawers. What it does:

• Seals the refrigerator drain opening so defrost/condensation water flows into the drain channel
• Helps prevent water from pooling under crispers or on shelf surfaces
• Reduces risk of fouling odors by keeping drain flow unobstructed
• Works with the drain trough and drain tube to route moisture to the evaporator pan

• One interior drain plug

• Disconnect power to the appliance before accessing interior panels
• Remove shelves/drawers and the evaporator or back inner panel as required for access
• Clean the drain channel and remove any debris or ice before installing the new plug
• Inspect surrounding gaskets and seating surface; press the plug firmly into place without forcing

This exterior drain plug seals the washer's drain opening to prevent leaks and contain water in the tub during operation. It provides a simple replacement to restore a watertight seal at the appliance drain area. What it does:

• Seals the drain opening to help prevent water leaks from the tub or drain housing
• Helps maintain proper drainage by keeping debris out of the drain path
• Can stop visible water weeping or puddling near the base of the washer
• Replaces a cracked, worn or missing exterior drain plug to restore normal operation

• One exterior drain plug

• Disconnect power to the appliance and turn off water supply before starting any work
• Remove the appropriate access panel or lower kick plate to reach the drain opening
• Press or thread the plug into the drain opening as designed; snug by hand and avoid over-tightening
• Inspect the surrounding seal area and replace any damaged gaskets or housings if present; test for leaks after reinstalling panels and restoring power/water

This clear interior light cover protects the refrigerator lamp while letting bright light illuminate shelves and food. It keeps the bulb shielded and helps maintain even lighting so you can see contents clearly. What it does:

• Covers and protects the interior lamp from spills and direct contact
• Diffuses light for more even illumination inside the compartment
• Helps prevent damage to the bulb from impacts or debris
• Commonly replaces cracked, cloudy, or missing light lenses

• One replacement light cover

• Disconnect power or unplug appliance before replacing the lens
• Remove old cover carefully and snap or screw new cover into place
• Use only the exact replacement to ensure proper fit and safe clearance from the bulb
• If the bulb or socket is damaged, replace those components as well; avoid handling bulbs with bare hands while hot

A replacement control knob for refrigerator temperature dials that restores a solid grip and clear setting selection. Replaces a worn or broken knob so you can adjust the fridge thermostat easily and safely. What it does:

• Fits over the temperature control shaft to provide a secure turning surface
• Lets you select and change refrigerator temperature settings accurately
• Replaces cracked, loose, or missing knobs that are hard to grip or don't turn
• Simple, direct replacement—no calibration of the thermostat required

• One thermostat control knob

• Pull the old knob straight off the control shaft and push the replacement on until it seats firmly
• Ensure the fridge is off or controls are in a neutral position to avoid sudden compressor start
• Inspect the control shaft for damage before installing; do not force a misaligned knob

The Thermostat is an OEM part for GE freezer. This part regulates the temperature inside the freezer compartment, ensuring that the stored food stays at the desired temperature. The thermostat monitors the internal temperature and signals the cooling system to turn on or off to maintain optimal conditions.

Causes of a bad thermostat can include electrical failures, wear and tear from regular use, or exposure to moisture. 

Symptoms of a bad thermostat include:

• The freezer not cooling properly
• Temperature fluctuations within the compartments
• The cooling system running continuously or not running at all
• Frost buildup or excessive condensation inside the refrigerator

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This power cord fix belt is a small cord-retaining strap that secures the appliance power cord to the cabinet. It helps keep the cord in place to reduce strain on the cord connection and maintain a reliable power connection. What it does:

• Holds the power cord firmly against the appliance frame to prevent tugging on the wiring
• Reduces movement that can loosen or wear the cord connection over time
• Helps prevent intermittent power or connection issues caused by a shifted cord
• Keeps cord routing neat and reduces stress at the plug/body interface

• One power cord fix belt

• Always disconnect power before accessing the cord or electrical panels
• Typically installs behind a rear access panel or at the cord entry point; basic tools may be required
• Position so the cord is secure but not pinched; replace if cracked or brittle

A small rubber grommet that cushions and seals wiring or components where they pass through a panel or opening, helping protect against chafing and reducing vibration for quieter, safer operation. What it does:

• Cushions wiring or tubing where it passes through metal or plastic openings
• Prevents chafing and wear on insulation or hoses
• Helps reduce vibration and rattling at the entry point
• Maintains a more secure, stable routing for components

• Disconnect power to the appliance before servicing to reduce risk of shock.
• Remove the panel or trim exposing the opening, then press the grommet into the hole until fully seated.
• Inspect surrounding wiring, hoses, and mounting surfaces for damage and replace if needed.