Parts for Ge PCG21SIMFFBS: 05 - Freezer Shelves Parts

This in-line water filtration system reduces water contaminants and improves taste of drinking water and ice. Reduces the taste and odor of chlorine through high quality carbon block media without removing minerals beneficial to your health. The filter should be replaced every six months or 300 galleons for best performance. The Quick Connect feature makes filter replacement fast and easy. Flow rate: 0.5 gpm/1.9 lpm. 1/4" quick connect fittings on both ends.

This fixed freezer shelf restores a sturdy, level storage surface in the freezer compartment. Replace a broken or missing shelf to regain organization, correct spacing, and full storage capacity.

• Provides a fixed-position storage surface inside the freezer
• Helps keep items level, organized, and easy to access
• Restores proper spacing with adjacent shelves, drawers, or baskets
• Replaces a cracked, warped, or missing shelf

• Disconnect power before servicing; wear gloves to protect hands
• Empty the area, then align the shelf with the side-wall slots or supports
• Slide or place the shelf into the supports until fully seated and level
• Distribute weight evenly and avoid overloading after installation

This freezer shelf trim replaces a damaged or missing edge piece on the freezer shelf. It attaches to the shelf/frame to provide a finished lip that helps contain items and restores the shelf's original fit and appearance.

• Provides the finished edge on a freezer shelf to help keep items from sliding off
• Attaches to the shelf/frame for a secure, correct fit
• Replace when cracked, warped, loose, or missing
• Common symptoms include a broken or jagged shelf edge, trim that won't stay attached, or items slipping off the shelf

• Unplug the refrigerator and remove items from the affected shelf
• Remove the shelf if needed; release and remove the old trim
• Align the new trim with the shelf/frame and press until fully seated and secure
• Do not force parts together; inspect the shelf/frame for damage before reassembly

This slide-out freezer shelf restores smooth access and sturdy storage in the freezer compartment. Replace a cracked, missing, or hard-to-move shelf to keep frozen foods supported, organized, and within easy reach.

• Provides a gliding storage surface in the freezer compartment
• Supports and organizes frozen foods for easier access to items in back
• Restores proper fit and sliding action when the original shelf is damaged or binding
• Typical signs you need this part: cracked/broken or missing shelf, sticking or uneven slide

• Empty the shelf and remove any obstructing bins or baskets
• Align rear tabs/pegs with the freezer slots or rails, then lower the front into place
• Ensure the shelf seats fully and slides smoothly before reloading food
• Handle edges carefully; consider wearing cut-resistant gloves

This basket wire is the molded metal rack that holds and organizes frozen food in the freezer compartment, restoring stable storage and easy access to items. Designed to match the original fit and function. What it does:

• Provides a sturdy shelf to store and organize frozen food items
• Prevents items from shifting during door opening and closing
• Restores usable storage space when the original basket is bent, broken, or missing
• Helps maintain airflow by keeping contents off the floor of the freezer

• Remove all food and unplug the appliance or turn off power before servicing
• Typically slides into molded tracks or hooks into support brackets; align and seat securely
• Inspect surrounding trim and supports for damage and replace if needed

The Handle is an OEM replacement part for GE Refrigerators. It allows for convenient access and opening of the refrigerator or freezer door. The handle is designed to withstand frequent use and open and close smoothly without issue. 

Symptoms of a bad Handle include:

• The handle is loose or wobbly
• Difficulty in opening the refrigerator door
• The handle detaching from the door
• Visible cracks, breaks, or wear on the handle

Causes of a bad Handle can be regular wear and tear over several years of use, Handle damage from being pulled too forcefully, or impact damage from moving or transporting the Refrigerator improperly. 

This Genuine OEM GE replacement Handle is also compatible with some Hotpoint, RCA and select Kenmore refrigerators.

This wire basket fits inside the freezer compartment to hold and organize frozen foods, restoring secure storage and preventing items from shifting or falling. It's a direct-replacement style used where a wire basket is required. What it does:

• Replaces a cracked, bent or missing freezer basket so food stays organized and contained
• Restores proper airflow and access in the freezer shelving area
• Stops items from shifting or falling through gaps caused by a damaged basket
• Helps maintain easy loading and unloading of frozen goods

• Disconnect power to the appliance before working in the freezer; remove all food from the area being serviced
• This is a user-replaceable part; remove any retaining clips or slides and lift out the old basket, then set the new basket into the same supports
• Wear gloves to protect hands from sharp edges on the old or new basket

The Handle is an OEM replacement part for GE Refrigerators. It allows for convenient access and opening of the refrigerator or freezer door. The handle is designed to withstand frequent use and open and close smoothly without issue. 

Symptoms of a bad Handle include:

• The handle is loose or wobbly
• Difficulty in opening the refrigerator door
• The handle detaching from the door
• Visible cracks, breaks, or wear on the handle

Causes of a bad Handle can be regular wear and tear over several years of use, Handle damage from being pulled too forcefully, or impact damage from moving or transporting the Refrigerator improperly. 

This Genuine OEM GE replacement Handle is also compatible with some Hotpoint, RCA and select Kenmore refrigerators.