Parts for Ge PFCS1PJZCSS: 03 - Freezer Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

8-18 CA HX 1/2 S

This divider guide kit replaces the guide components that support and align an adjustable divider inside the refrigerator. It restores smooth movement and secure positioning so the divider stays put and your bin or basket stays organized.

• Guides the adjustable divider along its track and keeps it centered
• Helps the divider hold position to partition storage space
• Replaces cracked, warped, or missing guide pieces
• Common symptoms: divider falls out, won't stay in place, binds, or is difficult to adjust; visible broken plastic on the guide

• Unplug the refrigerator and remove the affected bin/basket and divider before beginning
• Note the orientation and fastener locations to aid reassembly
• Use the appropriate screwdriver or nut driver; avoid overtightening into plastic
• After installation, the divider slides and locks securely

This upper drawer slide assembly supports and guides a refrigerator bin beneath its shelf. Replacing a cracked or worn slide restores smooth, aligned drawer movement so the bin opens and closes easily without binding or sagging.

• Provides the track the drawer rides on under the shelf
• Keeps the drawer level and properly aligned for smooth operation
• Typical failure signs: hard-to-open/close drawer, scraping, falling off track, visible cracks
• Helps prevent drooping on one side and restores stable support

• Unplug the refrigerator before servicing.
• Remove the drawer and any contents; handle glass shelves carefully if removal is required.
• Retain and reuse original screws/fasteners or trim pieces.
• Ensure the new slide is fully seated and level before reinstalling the drawer.

This Shelf Chiller 21 is a replacement refrigerator chiller shelf that restores a flat, stable surface for storing chilled items and helps organize foods in the chiller compartment. It fits into the chiller area to replace cracked or missing shelves and improve storage usability. What it does:

• Replaces a damaged or missing chiller shelf to restore usable storage space
• Provides a flat, stable surface for deli items, produce, and containers
• Helps maintain organization and prevents items from falling into the chiller drawer
• Visible wear or cracks on the old shelf are common reasons to replace it

• One Shelf Chiller 21

• Unplug the refrigerator or turn off power at the breaker before starting
• Remove food and the chiller drawer to access the shelf area
• Handle carefully—if glass, support edges to avoid breakage and personal injury
• Reinstall drawer and shelf in the original orientation; restore power and check fit

This ice bucket cover is a replacement clear plastic lid that protects and helps contain ice inside the refrigerator ice bucket. It helps reduce spills and keeps ice cleaner between harvest and dispensing. What it does:

• Covers the ice bucket to keep ice contained and reduce spilling when the bucket is removed
• Helps shield ice from odors and light exposure for better taste retention
• Replaces cracked, warped, or missing covers that allow ice to spill or become exposed
• Works with the ice bucket to guide ice toward the dispenser or scoop area

• One ice bucket cover (clear plastic)

• High-level, snap-on style fit; align and press into place until it seats
• Remove ice and bucket before installation to avoid injury or mess
• Unplug the refrigerator or disable the ice dispenser per manufacturer's safety guidance before any service
• If cover does not seat easily, inspect for obstructions or damaged bucket parts and replace as needed