Parts for Ge PSE25SGTECSS: 06 - Freezer Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

Size: 10-32 GXTT FLP.595 S

This silicon controlled rectifier (SCR) is a replacement control semiconductor that helps regulate power to heating elements and motors, restoring proper cycle control and heat delivery in compatible appliances. What it does:

• Controls and chops AC power to heating elements or motor circuits for variable heat/speed control
• Can stop intermittent or no-heat conditions caused by a failed SCR in oven, range, or similar appliances
• Helps restore stable thermostat/regulation behavior when the original SCR is not switching correctly
• Commonly used where precise power control is required in the appliance's control board or module

• One silicon controlled rectifier (SCR) as shown

• High-level, service-only replacement — disconnect power before starting work
• Verify correct part number on the appliance and transfer heat sinks or mounting hardware if required
• Use proper ESD precautions when handling semiconductor components

This replacement painted #8-18 screw secures panels and components on select appliances, restoring proper fit and reducing vibration. Use it when original fasteners are missing, stripped, or corroded to help keep parts aligned and stable. What it does:

• Fastens trim, panels, brackets, and small components in appliance assemblies
• Replaces stripped, rusted, or missing #8-18 fasteners that cause loose parts
• Helps eliminate rattles and misalignment from loose or damaged screws
• Matches the painted finish for a cleaner, OEM-like appearance

• Use the correct driver bit and avoid over-torquing to prevent stripping
• Inspect mating threads and replace if damaged before installing
• Disconnect power to the appliance if working near electrical components; follow all safety precautions

The Handle is an OEM replacement part for GE refrigerators. It is the outer component that allows for opening and closing access to the refrigerator or freezer compartment drawer.

Causes of a bad handle can include normal wear over time as handles experience constant friction from opening and closing.

Symptoms of a bad handle include:

• Loose, sagging, or unstable grip that does not feel secure
• Broken, cracked, or disconnected parts
• Chipped or faded surfaces affecting the appearance
• Difficulty or inability to open the drawer

This GE replacement part is specifically designed to provide a long-lasting replacement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This fixed-position freezer shelf restores sturdy, level storage space in your freezer compartment. Replace a cracked or missing shelf to regain capacity and keep items organized with proper spacing for airflow.

• Provides a stable platform for storing frozen foods
• Maintains designed spacing to support organization and airflow
• Direct replacement when the original shelf is broken, warped, or missing
• Common symptoms: cracked/broken shelf, sagging, items tipping, reduced usable space

• Unplug the appliance and clear the freezer area before replacing the shelf
• Align the shelf with the designated side rails/slots and insert level
• Ensure both sides are fully seated and secure before loading items
• Avoid overloading to prevent damage

This freezer shelf trim replaces a damaged or missing edge piece on the freezer shelf. It attaches to the shelf/frame to provide a finished lip that helps contain items and restores the shelf's original fit and appearance.

• Provides the finished edge on a freezer shelf to help keep items from sliding off
• Attaches to the shelf/frame for a secure, correct fit
• Replace when cracked, warped, loose, or missing
• Common symptoms include a broken or jagged shelf edge, trim that won't stay attached, or items slipping off the shelf

• Unplug the refrigerator and remove items from the affected shelf
• Remove the shelf if needed; release and remove the old trim
• Align the new trim with the shelf/frame and press until fully seated and secure
• Do not force parts together; inspect the shelf/frame for damage before reassembly

The Handle is an OEM replacement part for GE refrigerators. It is the outer component that allows for opening and closing access to the refrigerator or freezer compartment drawer.

Causes of a bad handle can include normal wear over time as handles experience constant friction from opening and closing.

Symptoms of a bad handle include:

• Loose, sagging, or unstable grip that does not feel secure
• Broken, cracked, or disconnected parts
• Chipped or faded surfaces affecting the appearance
• Difficulty or inability to open the drawer

This GE replacement part is specifically designed to provide a long-lasting replacement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This short freezer basket wire provides a sturdy support frame for the freezer compartment, helping organize frozen food and improving access. It replaces a damaged or missing basket wire to restore proper storage functionality. What it does:

• Supports and contains frozen items on a freezer shelf or drawer
• Restores proper fit and alignment for a short/freezer basket assembly
• Helps prevent items from shifting or falling through shelf openings
• Used when wire is bent, broken, or missing and basket stability is compromised

• One short freezer basket wire

• Remove food and unplug or power off the appliance before starting work
• Typically secures to existing shelf or drawer mounts—inspect mounts for damage before reinstalling
• Handle wire edges carefully to avoid cuts; wear gloves if needed

A right-hand slide basket that restores smooth support and guided movement for a refrigerator drawer. Replaces a damaged or worn slide assembly so the basket stays aligned and operates without binding. What it does

• Provides the right-side sliding support for a refrigerator shelf/drawer, keeping the drawer aligned as it opens and closes
• Replaces broken, bent, or worn slide hardware that causes scraping, binding, or a drawer that falls out of track
• Helps restore smooth travel and load-bearing for everyday use
• Fits into factory mounting points and works with the factory left/right counterpart when both are present

• One right-hand slide basket assembly

• Disconnect power to the appliance or unplug the refrigerator before starting service to avoid electrical hazard
• Empty the drawer and remove adjacent shelves or trim to access mounting points as needed
• Use basic hand tools; support the drawer while removing and installing the slide to prevent drops or damage

This left-hand slide basket provides the sliding support for a refrigerator drawer, restoring smooth opening and secure support so stored items stay accessible and organized. Fits where the left-side sliding bracket has failed or broken. What it does

• Replaces the left-side sliding support that holds and guides a refrigerator drawer or basket.
• Restores smooth, stable sliding action and prevents sagging or binding.
• Helps resolve symptoms like a drawer that won't slide, one-side droop, or a loose/misaligned basket.

• Disconnect power or unplug the appliance before servicing to reduce shock risk.
• Remove drawer/basket per manufacturer instructions to access and replace the slide; handle glass or plastic parts carefully.
• Use basic hand tools; snap or screw fasteners may be used depending on model.