Parts for Ge CYE22USHCSS: Freezer Shelves Parts

Removes contaminants from your refrigerator's water and ice. Replace every 6 months or when the filter indicator activates. Confirm fit with your model.

Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.

Replaces the lower basket floor in your refrigerator's bottom compartment. Install when the original basket bottom is cracked, warped, broken, or missing.

Fix a stuck or hard-to-open freezer drawer with this lower drawer gear. Replaces broken teeth causing drawer issues. Easy DIY repair, no tools needed.

Lower drawer gear for bottom-mount refrigerators. Installs on the left side of the freezer drawer assembly. Replace if cracked, broken, or damaged.

The Connector Gear Pinion is an OEM part for GE refrigerators. It is integral to the smooth operation of the freezer drawer, connecting the rail system and allowing the drawer to open and close effortlessly.

Causes of a bad connector gear pinion can include general wear and tear over time, excessive force applied during operation, or debris causing obstructions within the mechanism.

Symptoms of a bad Connector Gear Pinion include:

• Difficulty in opening or closing the freezer drawer
• Unusual noises such as grinding or clicking when operating the drawer
• The drawer not staying aligned or properly seated on the rails
• The drawer getting stuck or not moving smoothly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Crossbar pinion for refrigerator freezer drawer slide assembly. Replace if cracked, broken, or worn causing drawer misalignment or rough movement.

Secures the crossbar in your refrigerator's interior for stable shelving support. Replace if pin is broken, missing, or worn to restore proper fit.

Secures freezer door panels and trim to prevent rattling and maintain proper seal. Replace when screws are worn, missing, or stripped. Confirm fit with model.

Replace a cracked, broken, or missing bottom divider basket in your refrigerator drawer. This organizational component helps separate items in the fresh food compartment.

Holds and positions refrigerator drawer or shelf dividers to keep contents separated. Replace this molded plastic stop if cracked, broken, or missing.

Right-hand bracket slide that secures and guides the freezer drawer assembly. Replace if broken, cracked, or worn to restore proper drawer alignment.

This left-side freezer bracket slide secures and guides a freezer shelf or drawer, restoring stable support and smooth movement. Replaces a broken or worn slide to keep freezer shelving aligned and functioning. What it does:

• Supports the left side of a freezer shelf/drawer and guides sliding motion
• Prevents shelf sagging, misalignment, or catching when opening/closing
• Replaces cracked, bent, or missing brackets that allow shelves to drop
• Helps restore even weight distribution for safe storage

• Disconnect power before servicing and work with the freezer empty and temperature stabilized
• Remove freezer drawers/shelves for access; keep track of fasteners
• Use basic hand tools; align bracket before tightening to avoid binding

Right-hand slide bracket for the upper freezer basket in GE refrigerators. Replace if cracked, broken, or worn to restore smooth basket gliding.

Fix a broken or missing freezer drawer basket. Includes glide rails for smooth sliding. Easy DIY installation—just slide into place. Fits GE models.

Supports and aligns the left drawer rail for smooth gliding. Replace if cracked or warped to prevent binding or sagging. Confirm fit with your model.

Lower right freezer drawer slide rail for bottom-mount refrigerators. Guides and supports the drawer for smooth opening and closing. Replace if cracked or worn.

Left-side slide rail for bottom-mount refrigerator freezer drawers. Replace if cracked, broken, or worn causing drawer misalignment or rough movement.

Fix a broken or missing freezer drawer basket. Includes glide rails for smooth sliding. Easy DIY installation—just slide into place. Fits GE models.

Replace your refrigerator's upper divider basket to restore organization in storage compartments. Fits when the original is cracked, broken, or missing.

Upper freezer divider stopper for bottom-mount refrigerators. Secures the divider shelf in place. Replace if cracked, broken, or missing to restore organization.

Secures the right freezer shelf slide so drawers glide smoothly. Replace if cracked, broken, or missing to restore proper support. Confirm fit with model.

Left-side freezer drawer slide holder for bottom-mount refrigerators. Secures and supports the drawer slide rail for smooth gliding. Replace if cracked or broken.

8-18 x 9/16-inch hex washer head screw secures panels, brackets, and trim in appliances. Replace missing, damaged, or stripped screws for proper fit.

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

Mounting screw fastens panels, brackets, and trim in refrigerators, dishwashers, and ranges. Replace missing, stripped, or rusty screws to secure parts.