Parts for Ge DFE28JSHCSS: Fresh Food Door - Rh Parts

Filter Material: Carbon Block. Micron Rating: 0.5. Flow Rate: 0.5 gpm. Operating Pressure: 120 psi. Approximate dimensions: 10" x 1-3/4"

The GE Refrigerator Water Filter RPWFE is an OEM part for GE refrigerators. This advanced water filter is crucial for removing contaminants and impurities from your refrigerator's water supply, ensuring you have access to clean, fresh-tasting drinking water and ice. Utilizing a state-of-the-art filtration process, the RPWFE filter is capable of reducing various contaminants, including lead, chlorine, and five pharmaceuticals, providing peace of mind about the quality of your water.

Over time, water filters can become clogged with particles and contaminants, leading to a decrease in water flow and a reduction in the effectiveness of filtration. It's important to replace your refrigerator water filter as recommended by the manufacturer, typically every six months, to ensure optimal performance and maintain the quality of your water.

Symptoms of a filter needing replacement include:

• Reduced water flow from the dispenser.
• Unpleasant taste or odor in the water or ice. 
• The refrigerator's water filter indicator light turns on

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This is a replacement round-head 10-32 x .353 screw used to fasten appliance panels and internal components. It restores secure mounting and helps stop rattling or loose parts caused by missing or worn fasteners. What it does:

• Secures panels, brackets, or small assemblies where a 10-32 machine screw is specified
• Stops movement and vibration that can cause noise or misalignment
• Replaces missing, stripped, or corroded fasteners to restore proper fit
• Matches the original fastener size and head style for correct clearance

• One 10-32 x .353 round-head screw

• Use the matching driver (typically a Phillips or slotted driver as required by the head) and avoid over-torque to prevent stripping
• Disconnect power and follow safety procedures when accessing internal components
• If other fasteners appear damaged or corroded, inspect and replace as needed

The Fastener Door Handle is an OEM component for GE refrigerators. This door handle provides a comfortable grip for accessing refrigerator shelves and bins. It attaches securely to the refrigerator door through durable metal fasteners. 

Causes for a bad door handle could be cracks, damage, or stripped fastener holes resulting in a loose or detached handle. Regularly gripping and lifting may also cause normal wear over time.

Symptoms of a failing door handle include:

• The handle detaching completely from the door  
• Looseness making the handle wobbly or unstable to hold
• Sharp edges or broken parts posing a safety risk

This OEM GE handle is also compatible with Hotpoint, RCA, and select Kenmore refrigerator models.

The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door. 

Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.  

Symptoms of a bad Set Screw include:

• A loose refrigerator door handle, which may wobble or detach partially from the door.
• Difficulty in opening or closing the refrigerator door due to a lack of secure grip.
• The need to frequently retighten the door handle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fresh Food Door Gasket is an OEM part for GE refrigerators, specifically designed to ensure an airtight seal around the door of the refrigerator's fresh food compartment. This gasket plays a crucial role in maintaining the refrigerator's internal temperature, preventing warm air from entering and cold air from escaping. By doing so, it helps to keep food fresh for longer periods, reduces energy consumption, and ensures the appliance operates efficiently.

The cause of issues with the door gasket can be normal wear and tear over time. Frequent opening and closing of the refrigerator door, along with accidental spills or debris, can also degrade the gasket's material, reducing its effectiveness.

Symptoms of a failing Fresh Food Door Gasket include:

• Noticeable gaps or tears in the gasket
• Condensation or frost buildup inside the refrigerator
• The refrigerator door not closing as tightly as it should
• An increase in the energy required to maintain the refrigerator's temperature

This OEM GE  part is also compatible with Hotpoint, RCA, and some Kenmore models.

This curved fresh food door handle assembly restores a secure, factory look and grip to your refrigerator's main compartment door. Replace a cracked or loose handle to keep daily openings comfortable and the finish looking clean.

• Attaches to the fresh food door and provides the leverage needed to open and close the compartment
• Restores proper fit and appearance when the original handle is broken, cracked, or missing
• Helps correct wobble or looseness from worn attachment points
• Common signs it's needed: loose or wobbly handle, visible cracks, damaged finish, or a handle that won't stay secured

• Protect the door finish with painter's tape before removing or installing the handle
• This style commonly slides over existing door studs and tightens with hidden set screws—use the correct hex/Allen driver and do not overtighten
• Check that the door gasket seals evenly after installation
• Always follow your product's service manual and use proper hand protection

8-18 hi/lo 5/8

This replacement part is a door and is intended for use in refrigerators. This door is able to seal the appliance shut while not in use, allowing the food to stay cold.A new door might be needed if the current one is no longer able to seal properly. This can be due to normal wear and tear in the door sealant or the door itself. If the temperature inside the appliance is higher than normal, the door may not be working as needed and should be replaced if this is the case. This should be a fairly simple repair.This is a genuine OEM replacement part made by GE. This part is sold individually and is sourced directly from the manufacturer for long-lasting use.

This is a replacement round-head screw sized 10-24 x 5/8 in. It secures trim, panels, and internal components so parts stay aligned and appliances run quietly and safely. What it does

• Fastens panels, brackets, and trim pieces in place
• Prevents loose parts that can rattle or cause misalignment
• Replaces missing or stripped screws to restore secure mounting
• Works where a 10-24 x 5/8 round-head screw is required

• Disconnect power before servicing the appliance
• Use the proper screwdriver or nut driver to avoid stripping the head
• Align parts before tightening and thread gently to avoid cross-threading
• Do not over-tighten; stop when snug to prevent panel distortion

This hinge-mounted refrigerator door stop limits how far the door swings open, protecting the cabinet and nearby walls from impact. Replace a cracked or missing stop to restore a controlled, factory door swing and prevent overextension.

• Mounts on the door hinge to control the door's opening range
• Helps prevent the door or handle from striking adjacent walls or cabinets
• Common symptoms: door opens past its normal range, broken/missing stop, visible wear at the hinge stop
• Often needed after an impact or when the original stop cracks from fatigue

• Disconnect power; turn off water to the door if applicable
• Support the door before loosening hinge fasteners; door removal may be required on some models
• Install the stop on the correct hinge location (right or left as required) and tighten hardware securely
• Verify door swing and clearance before fully loading shelves

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

Replacement mat module that restores mat-sensing and control functions in compatible appliances. Installs in the mat/sensor assembly to help the appliance detect mat input and respond correctly. What it does:

• Interprets signals from the mat/sensor assembly and communicates those signals to the appliance control system.
• Replaces a damaged or failed module that can cause unresponsive mat inputs or intermittent mat-related operation.
• Helps resolve mat/sensor error codes or persistent mat-detection faults when the module is the failed component.

• Disconnect power to the appliance before servicing to avoid electrical shock.
• Handle the module carefully and avoid touching circuitry or connector pins to prevent damage from ESD or contamination.

The Gallon Door Bin is an OEM part for GE refrigerators. It is designed to attach to the inside of the refrigerator door, providing convenient storage space for gallon-sized containers, such as milk jugs, juice containers, and other large beverages.  

A functioning gallon door bin is key to organizing and efficiently using your refrigerator space. Over time, door bins can suffer from wear and tear or become damaged due to overloading or accidental impact.

Symptoms of a bad Gallon Door Bin include:

• Cracks or breaks in the bin itself
• Difficulty attaching the bin to the door or it not staying in place
• The bin sagging or failing to hold items securely

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dairy Door bin is an OEM replacement part for Frigidaire refrigerators. It is specifically designed to provide a designated storage space for dairy products like butter, cheese, and yogurt. This bin is attached to the refrigerator door and is covered to maintain the optimal temperature and humidity levels to keep dairy products fresh.

Common causes of a bad dairy door bin include regular wear and tear, accidental drops, or impacts during loading and unloading.

Symptoms of a bad dairy tray door include:

• Cracks or breaks in the plastic tray surface
• Difficulty keeping items on the tray due to a poorly fitting door
• Inability to easily access or remove items from the tray

This genuine Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement door bin fits the right-hand fresh food door and restores organized storage for condiments, jars, and small bottles. It helps maximize usable space and keeps frequently used items easy to see and reach.

• Holds condiments, small bottles, and jars on the right fresh food door
• Replaces a cracked, broken, or missing door bin
• Snaps into the molded slots on the door liner for secure storage
• Common symptoms: cracked plastic, broken tabs, won't stay seated, items tipping

• Disconnect power before servicing
• Empty and lift the old bin up and out of the door liner slots
• Align the new bin with the slots and press down until fully seated
• Confirm a secure fit before loading items

The Dairy Door bin is an OEM replacement part for Frigidaire refrigerators. It is specifically designed to provide a designated storage space for dairy products like butter, cheese, and yogurt. This bin is attached to the refrigerator door and is covered to maintain the optimal temperature and humidity levels to keep dairy products fresh.

Common causes of a bad dairy door bin include regular wear and tear, accidental drops, or impacts during loading and unloading.

Symptoms of a bad dairy tray door include:

• Cracks or breaks in the plastic tray surface
• Difficulty keeping items on the tray due to a poorly fitting door
• Inability to easily access or remove items from the tray

This genuine Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dairy Door bin is an OEM replacement part for Frigidaire refrigerators. It is specifically designed to provide a designated storage space for dairy products like butter, cheese, and yogurt. This bin is attached to the refrigerator door and is covered to maintain the optimal temperature and humidity levels to keep dairy products fresh.

Common causes of a bad dairy door bin include regular wear and tear, accidental drops, or impacts during loading and unloading.

Symptoms of a bad dairy tray door include:

• Cracks or breaks in the plastic tray surface
• Difficulty keeping items on the tray due to a poorly fitting door
• Inability to easily access or remove items from the tray

This genuine Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.