Parts for Ge DFE28JSHCSS: Freezer Shelves Parts

Removes contaminants from your refrigerator's water and ice. Replace every 6 months or when the filter indicator activates. Confirm fit with your model.

Replacement screw secures panels, trim, brackets, and internal components in your refrigerator. Needed when original is missing, stripped, or corroded.

Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.

Bottom freezer basket assembly for refrigerators. Installs in lower freezer compartment for organized frozen food storage. Replace if cracked or broken.

Fix a stuck or hard-to-open freezer drawer with this lower drawer gear. Replaces broken teeth causing drawer issues. Easy DIY repair, no tools needed.

Lower drawer gear for bottom-mount refrigerators. Installs on the left side of the freezer drawer assembly. Replace if cracked, broken, or damaged.

The Connector Gear Pinion is an OEM part for GE refrigerators. It is integral to the smooth operation of the freezer drawer, connecting the rail system and allowing the drawer to open and close effortlessly.

Causes of a bad connector gear pinion can include general wear and tear over time, excessive force applied during operation, or debris causing obstructions within the mechanism.

Symptoms of a bad Connector Gear Pinion include:

• Difficulty in opening or closing the freezer drawer
• Unusual noises such as grinding or clicking when operating the drawer
• The drawer not staying aligned or properly seated on the rails
• The drawer getting stuck or not moving smoothly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

If ice isn't ejecting from your ice maker, this crossbar pinion drives the ejector mechanism during harvest. Slides into place and secures with pin.

Secures the crossbar in your refrigerator's interior for stable shelving support. Replace if pin is broken, missing, or worn to restore proper fit.

Secures freezer door panels and trim to prevent rattling and maintain proper seal. Replace when screws are worn, missing, or stripped. Confirm fit with model.

Bottom freezer basket assembly for refrigerators. Installs in lower freezer compartment for organized frozen food storage. Replace if cracked or broken.

Bottom freezer basket assembly for refrigerators. Installs in lower freezer compartment for organized frozen food storage. Replace if cracked or broken.

Holds and positions refrigerator drawer or shelf dividers to keep contents separated. Replace this molded plastic stop if cracked, broken, or missing.

Right-hand slide bracket assembly that mounts to the cabinet side to support and guide refrigerator or freezer drawers. Replace if cracked or worn.

Left slide bracket assembly supports and guides refrigerator drawers for smooth operation. Replace when drawers stick, misalign, or won't close properly. Confirm fit with your refrigerator model number before ordering.

Right-hand slide bracket for refrigerator freezer baskets. Replace if cracked, broken, or basket won't slide smoothly. Secures with two screws.

Supports and guides your upper freezer basket for smooth sliding. Replace when cracked or worn to restore easy access and proper alignment. Easy install.

This silicon controlled rectifier (SCR) is a replacement power-control semiconductor used to regulate current in appliance power circuits, helping restore proper operation of heating and motor circuits that rely on solid-state switching. What it does:

• Acts as a switch to control and modulate electrical current in the appliance power path
• Enables regulated power delivery to heating elements or motor circuits when driven by the control board
• Commonly replaced when the appliance shows intermittent power, no heat, or erratic on/off behavior in the affected circuit
• Works as a direct replacement for the OEM SCR with identical mounting and electrical fit when specified by part number

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Observe basic ESD precautions when handling the SCR and avoid touching semiconductor leads

This rubber grommet cushions and protects small appliance wires, hoses, or components where they pass through panels or openings. It helps prevent chafing and vibration wear for quieter, longer-lasting operation. What it does:

• Cushions wiring or tubing where it passes through sheet metal to prevent rubbing and damage
• Reduces vibration noise from loose fittings or contact points
• Holds harnesses or hoses in position to maintain proper routing
• Helps keep openings sealed against dust and debris around routed components

• Disconnect appliance power (and water if applicable) before replacing parts
• Remove the original grommet and install the new grommet in the same orientation; ensure the wire/hose seats fully in the grommet
• Inspect surrounding wiring, hoses, and mounting holes for damage and replace if needed
• Use only the specified replacement grommet; do not modify with adhesives or solvents unless manufacturer guidance allows

Left-hand bracket that secures the freezer basket slide rail in top freezer refrigerators. Replace if cracked, broken, or missing to restore stability.

Lower freezer drawer slide enables smooth gliding access to your freezer compartment. Replace if drawer sticks, wobbles, or doesn't glide properly. Confirm fit with your model number before ordering.

Left-side lower freezer drawer slide for bottom-mount refrigerators. Replaces worn or damaged slides with seized bearings, broken tabs, or missing parts.

Upper freezer divider basket for bottom-mount refrigerators. Organizes frozen items in the top section. Replace if cracked, broken, or missing.

Upper freezer divider stopper for bottom-mount refrigerators. Secures the divider shelf in place. Replace if cracked, broken, or missing to restore organization.

Stores ice made by your icemaker and delivers it when dispensing. Replace if cracked, broken, or worn to restore proper ice storage and delivery.

Replacement ice maker stripper for refrigerators. Installs in the ice maker assembly. Order a new one if your original is cracked, broken, or missing.

If your icemaker isn't making ice or is leaking water, the fill cup may be cracked or misaligned. This part directs water into the icemaker mold for proper ice production.

Ice maker not cycling or producing ice? Stops working after years of use when internal gears wear out. Replacement restores automatic ice production.

Right-hand freezer drawer slide holder that secures and guides the drawer for smooth operation. Replace if cracked, broken, or worn to restore alignment.

Left-side freezer drawer slide holder secures and guides your refrigerator's freezer drawer. Replace if cracked, broken, or worn to restore alignment.

8-18 x 9/16-inch hex washer head screw secures panels, brackets, and trim in appliances. Replace missing, damaged, or stripped screws for proper fit.

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation

Fix interior lights that won't turn on or off when opening your refrigerator door. This door-mounted striker switch is a common fix for lighting issues.

This spring feeler arm is the replacement sensing arm used with the refrigerator ice maker assembly to detect ice level and help actuate the ice-making mechanism. Restores proper ice sensing and helps prevent overfill or stoppage. What it does:

• Acts as the ice maker's feeler/bail arm to detect when the ice bin is full or empty.
• Triggers the ice maker to stop or continue cycles based on ice level.
• Helps prevent overfilling and reduces ice production problems caused by a bent or broken arm.
• Can stop erratic ice maker behavior when the original arm is damaged or worn.

• Disconnect power to the refrigerator before beginning any repair.
• Handle the arm carefully and inspect the ice maker mounting points for damage before installation.
• Reuse factory hardware if undamaged; replace any stripped or missing fasteners.

Ice maker won't stop making ice or won't make any? This feeler arm senses ice levels to control production. Fixes overfilling and no-ice issues.

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

Ice maker stopped working or making noise? This wiring housing protects ice maker wires from damage in your freezer. Prevents wire chafing issues.