Parts for Ge ZISP420DKCSS: Fresh Food Door Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This top hinge bushing helps the refrigerator door pivot smoothly and reduces metal-on-metal wear. Replacing a worn bushing restores quieter operation and helps the door align and close properly. What it does:

• Provides a low-friction mounting surface for the top hinge pin
• Reduces hinge noise, squeaks, and grinding when opening or closing the door
• Helps maintain proper door alignment and sealing by preventing excess play
• Prevents accelerated wear of the hinge pin and surrounding trim

• Always disconnect power to the appliance before starting any repair
• Support the door securely before removing the hinge to avoid injury or damage
• Inspect hinge pin and surrounding components; replace if heavily worn
• Hand-tighten fasteners, then torque to manufacturer specifications; avoid over-tightening plastic components

The Bin Assembly Gallon is an OEM part for GE refrigerators. This part fits on the refrigerator door and provide storage for gallon-sized containers, such as milk or juice jugs.

Causes of a bad bin assembly can include regular wear and tear, damage from heavy items being placed inside, or accidental impacts that crack or break the bin.

Symptoms of a bad bin assembly include:

• Cracks or breaks in the plastic bin
• The bin not staying securely in place
• Difficulty in sliding the bin in and out
• Items not fitting properly due to deformation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Bin Assembly is an OEM component for GE refrigerators. This component is designed to attach to the interior side of the refrigerator door, providing additional storage space for items such as condiments, beverages, and other frequently accessed products. The assembly is crafted to hold items securely while optimizing space usage within the refrigerator.

Causes for a malfunctioning Door Bin Assembly can include general wear from frequent use, excessive weight placed in the bin leading to cracks or breaks, or issues with the clips or connectors that attach it to the door.

Symptoms of a bad Door Bin Assembly include:

• The bin detaching from the door or sagging
• Visible cracks or damage on the bin
• Difficulty in fitting items into the bin due to warping or deformation
• Items not staying securely in place within the bin

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dairy bin is the removable refrigerator door shelf used to hold butter, small dairy items and condiments; it restores secure storage and organized door shelving. Fits the 42" wide door shelf position. What it does:

• Replaces a cracked, chipped or broken door dairy bin so items stay contained
• Restores proper storage on the refrigerator door to prevent spills and shifting
• Allows the door shelf to close and seal without obstruction from a damaged bin
• Provides an easily removable container for cleaning and loading small items

• One dairy bin

• Empty the door shelf and remove any previous bin before installing
• Align the bin tabs with the door shelf tracks and snap into place until secure
• Handle carefully to avoid chipping; do not force—if it won't seat smoothly, recheck alignment
• No special tools required; refer to your refrigerator manual for detailed removal/installation instructions

This factory gasket and label assembly for side-by-side refrigerators restores the proper seal where specified and replaces the original identification label. It helps prevent leaks at that interface and preserves correct product information after service. What it does:

• Provides a tight seal between mating parts as designed
• Helps reduce air or moisture leaks at that location
• Replaces torn, flattened, or missing gasket material
• Restores a damaged, missing, or unreadable factory label

• One gasket and label assembly

• Disconnect power before servicing
• Clean and dry surfaces thoroughly before installing the gasket or applying the label
• Install the gasket evenly without twists or gaps; verify full contact all around
• Place the label only in the location specified by the model's service documentation

This stainless steel hex cap screw fastens appliance panels and components where a 1/4-20 threaded fastener is required. Durable corrosion-resistant finish helps maintain secure mounting and reliable operation. What it does

• Secures panels, brackets, and internal components to frame or chassis.
• Replaces stripped, rusted, or missing mounting screws that cause loose or rattling parts.
• Restores proper alignment and prevents movement that can lead to wear or noise.

• Use the correct 1/4 in hex socket or wrench; avoid rounded or worn tools.
• Tighten until snug; do not over-torque — overtightening can strip threads or crack plastic parts.
• Replace any damaged mating hardware (nuts, clips, or threaded inserts) for a secure fit.
• Power tools may be used carefully on low torque settings to avoid over-driving.