Parts for Ge ZISP420DKCSS: Fresh Food Shelves Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This is a replacement fresh-food compartment shelf that restores usable storage space and keeps items stable and organized. It fits into the refrigerator cabinet to replace a cracked, chipped, or missing shelf. What it does:

• Provides a stable, flat surface for storing food and containers in the fresh-food compartment
• Replaces broken, cracked or sagging shelving that can no longer support items
• Helps maintain even spacing and organization for better access to stored items
• Compatible with factory shelf supports and slides to sit securely in place

• One refrigerator fresh-food compartment shelf

• Remove food and any items from the area before installing
• Slide the shelf into place on the existing supports; no special tools typically required
• Inspect shelf supports for damage and replace if worn to ensure a secure fit
• Follow refrigerator manufacturer's safety instructions; disconnect power if moving the appliance

This inner drawer slide guides and supports a refrigerator drawer/bin so it opens and closes smoothly. Replacing a worn or cracked slide restores proper alignment and easy, consistent movement of the drawer.

• Provides guided travel for the drawer along the cabinet rails
• Helps keep the drawer level and properly aligned to prevent binding
• Replace if the drawer sticks, grinds, jumps track, or won't close fully
• Visible cracks, broken tabs, or excessive wobble indicate a failed slide

• Unplug the refrigerator before servicing; remove the drawer and its contents
• Note the orientation of the old slide and reuse the existing mounting hardware
• Install the new slide in the same position; tighten screws evenly without overtightening
• Test drawer movement and ensure it seats flush and glides smoothly end to end

This replacement vegetable pan assembly restores a sealed storage area in the refrigerator drawer to help keep produce organized and contained. Fits the drawer cavity to provide a moisture-controlled surface for fruits and vegetables. What it does:

• Replaces a cracked, warped or missing vegetable/produce pan so items sit securely in the drawer
• Helps contain spills and keeps small items from sliding under shelves
• Restores proper drawer fit and alignment for smooth opening and closing
• Reduces direct contact between produce and the refrigerator floor, aiding cleanup

• Disconnect power to the appliance before servicing to reduce risk of shock
• Remove drawer and any shelves or supports that obstruct access; handle parts carefully to avoid damage
• Slide the replacement pan into the drawer cavity until it seats evenly; no special tools typically required

This veg pan wire support holds the refrigerator crisper/vegetable pan in place so drawers slide level and stay supported. Replaces a bent, broken or missing support to restore proper pan alignment and prevent sliding. What it does

• Supports the vegetable/crisper pan so it stays level and secured in the cabinet
• Prevents the pan from tipping or sliding out when opening drawers
• Stops rattling or movement caused by a damaged or missing support
• Works with the cabinet shelving/slide system to maintain smooth drawer operation

• One veg pan wire support

• Remove food and the crisper pan before installing
• Typically installs by seating into existing slots or clips; no special tools required
• Handle edges carefully to avoid bending the wire or scratching the cabinet

This LED shelf light assembly replaces a burned-out or damaged fresh-food shelf light to restore even, energy-efficient illumination inside the refrigerator. Designed as a direct-fit replacement for the original shelf lighting. What it does:

• Provides consistent LED lighting across the fresh-food shelf area
• Replaces dim, flickering, or nonworking shelf lights
• Helps improve visibility for food storage and retrieval
• Fits into the existing shelf light cavity and uses the factory mounting/connector

• Disconnect power to the appliance before starting any work
• Handle the LED assembly and connector with care to avoid damage
• Verify electrical connector orientation and secure mounting during install

This right-hand pan side support secures the refrigerator drain/drip pan, helping keep the pan aligned and stable to prevent sagging or movement that can lead to noise or water pooling under the appliance. What it does:

• Holds the drain/drip pan in the correct position at the right side of the cabinet
• Prevents pan sagging that can cause vibration or rubbing noises
• Helps maintain proper pan alignment to reduce the chance of water spills or pooling
• Replaces worn, cracked or broken side supports that no longer secure the pan

• Disconnect power to the appliance before beginning any repair
• Access may require removing the kickplate/grille and/or sliding out the pan
• Handle plastic parts carefully to avoid cracking; confirm correct side (right-hand) before installation
• If fasteners are stripped or damaged, replace them with OEM-recommended hardware

This left-side pan support secures and aligns the refrigerator pan/drawer, restoring stable, level support for smooth drawer movement and proper pan positioning. It's a simple replacement that prevents sagging or misalignment. What it does:

• Supports the refrigerator pan or deli drawer on the left side to keep it level and stable
• Holds the pan in place so drawers slide smoothly and don't catch or tilt
• Failsafe for preventing pan sagging or partial drops when the original clip breaks
• Helps maintain proper airflow and drawer operation by keeping components aligned

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove the pan/drawer per your model's diagram to access the support
• Replacement typically snaps or screws into the same bracket location — align tabs and press firmly until seated
• Inspect adjacent supports and mounting clips; replace any damaged pieces to ensure proper fit

This outer drawer slide supports and guides a refrigerator drawer or pantry pan so it opens and closes smoothly. Replacing a worn or cracked slide restores alignment and helps prevent sticking, tipping, or spills.

• Attaches as the outer rail for the sliding drawer assembly
• Provides smooth gliding action and supports the drawer/pan
• Helps keep the drawer level and properly aligned
• Common symptoms: drawer hard to move, tilts or falls, cracked/broken rail, scraping or binding

• Disconnect power; empty and remove the affected drawer
• Remove the shelf/cover if needed to access the slide
• Take out mounting screws/clips; note the slide's orientation
• Install the new slide, ensure rails are parallel, and test drawer travel

A 6 x 1/2 inch pan-head Phillips screw used to fasten panels, trim, brackets and small assemblies on appliances. Replacing worn or missing screws restores secure mounting and reduces vibration or rattling. What it does:

• Fastens panels, brackets and trim where a 6 x 1/2 in. pan-head Phillips screw is required.
• Stops loose or rattling parts caused by missing, stripped or corroded screws.
• Provides the correct head profile for a Phillips driver to allow proper torque and seating.
• Used in non-structural fastening points on appliances.

• Always disconnect power and unplug the appliance before beginning repairs.
• Use the correct-size Phillips screwdriver to avoid cam-out and head damage.
• Do not over-tighten; over-torquing can strip threads or deform mating parts.
• Inspect mating threads and replace damaged components before installation.