Parts for Ge GFE24JGKBFBB: Fresh Food Section Parts

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This light housing assembly replaces the interior light enclosure that holds the socket and lens, restoring safe illumination inside the appliance. It keeps the bulb secure and protects components from moisture and debris. What it does:

• Houses the light socket and lens to direct and protect interior lighting
• Restores a broken, cracked, or missing light cover that causes poor illumination
• Replaces a housing with a loose or damaged socket that causes intermittent lighting
• Helps prevent direct contact with the bulb and protects wiring from spills

• One light housing assembly

• Disconnect power to the appliance before starting any work
• Typically mounts with snap tabs or screws; handle the lens carefully to avoid cracking
• Replace bulb with correct type and rating per your appliance manual

This air tower assembly directs and channels cold air inside the fresh-food compartment to help maintain even cooling and proper airflow. It replaces a damaged or cracked duct that can cause uneven temperatures. What it does

• Routes conditioned air from the evaporator into the fresh-food section for consistent cooling.
• Helps prevent warm spots and reduces localized thawing or food spoilage.
• Restores proper airflow if existing tower is cracked, broken, or blocked.
• Can reduce frost build-up caused by disrupted airflow pathways.

• Disconnect power before starting any service to avoid electrical shock.
• Remove interior shelves and panels as needed for access; handle plastic parts gently to avoid cracking.
• Inspect surrounding seals and ducts during replacement; secure with factory fasteners only.

The Damper Assembly is an OEM component specifically designed for GE refrigerators. This assembly is located within the fresh food compartment and functions to control airflow and temperature regulation. 

The damper works with the evaporator fan to carefully moderate circulating air, preventing cold spots and optimizing equal cooling. Consistent temperatures extend the shelf life of perishable goods. 

Causes of a faulty damper assembly can include failure of the plastic gears or axle that coordinate its movements over time. Improper air circulation disrupts the refrigerator's performance.

Symptoms include: 

• Formation of frost or ice buildup in problem areas  
• Inconsistent shelf temperatures from top to bottom
• Foods spoiling more quickly 

This replacement assembly from GE restores dependable temperature control. Upgrade today for continued fresh food preservation abilities matching OEM standards. It is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This water filter cover is the replacement housing that secures and seals the refrigerator's water filter cartridge, keeping the filter in place and helping prevent leaks and debris entry. Restores proper fit and appearance. What it does:

• Secures the water filter cartridge in the filter bay to maintain a proper seal
• Helps direct water flow to and from the filter for normal dispensing and icemaking
• Protects the filter from dust and debris that can affect water quality
• Can reduce or stop minor leaks caused by a cracked or missing cover
• Restores the finished look of the filter area

• One water filter cover

• Turn off refrigerator water supply and dispense any remaining water before starting
• Disconnect power or follow manufacturer safety instructions to avoid electrical hazard
• Typically installs by aligning and snapping or fastening into the filter compartment; keep original fasteners if present
• After installation, turn water back on and check for leaks; run water through dispenser to purge air

The water filter is an OEM part for GE refrigerators. This filter removes or reduces various contaminants.

Features and Benefits:

• Easy DIY replacement, typically mounted inside the refrigerator at the back of the compartment.
• Removes or reduces various contaminants in your water and ice, including lead, cysts, asbestos, atrazine, , taste and odor, chlorine, sediment, turbidity, and more
• NSF/ANSI 42 and 53 standards
• 6 Month lifespan filter
• Carbon Block media
• Micron rating: 0.5-1 micron (Class I)

When to replace your filter:

• Bad taste or odor in water and ice
• Cloudy or discolored ice
• Reduced water flow or pressure
• Refrigerator replace filter indicator light is on

Note: If replacing the Culligan metal canister design filter for the first time, a special adapter, part number AP2615702 is needed, which is not included with this part. The compatible bypass cap is part number AP6891551.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

The Mwf Manifold is an OEM part for GE refrigerators. This part is responsible for housing and connecting the water filter in your refrigerator, ensuring clean and filtered water for drinking and ice. This water filter manifold provides a secure and reliable connection for the water filter which removes impurities and contaminants from the water supply, improving the taste and quality of your drinking water.

A bad water filter manifold can occur due to wear and tear, leaks, or other factors. If you notice symptoms such as water leakage, reduced water flow, or a decrease in water quality, it may be time to replace the water filter manifold.

Symptoms of a bad water filter manifold include:

• Water leakage around the manifold
• Reduced water flow
• Decreased water quality

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

This LED light board assembly provides the replacement LED module that illuminates the control/display area. Restores visibility of panel indicators and display lighting for proper operation and ease of use. What it does:

• Replaces the LED light module that backlights the control/display area and status indicators.
• Restores faded or non-lit control panel lighting that makes buttons and icons hard to see.
• Can resolve intermittent or no-light symptoms caused by a failed LED board.
• Works with the original housing and connectors for a direct-fit replacement.

• One LED light board assembly as shown

• Disconnect power to the appliance before starting any repair to avoid shock.
• Handle the board by edges; avoid touching LED lenses or circuitry to prevent damage.
• Verify connector orientation and seating; secure mounting screws to prevent rattle.

This light shield is the protective interior cover that helps protect the refrigerator light and direct interior illumination for better visibility. It replaces a cracked, yellowed, or missing lens to restore a finished look. What it does:

• Covers and protects the refrigerator bulb or lamp from impacts and food contact
• Helps diffuse and direct light for more even interior illumination
• Restores a clean appearance if the original shield is cracked, discolored, or missing
• Can reduce glare from the bulb and prevent debris buildup on the lamp

• One light shield / interior lamp cover

• Disconnect power to the appliance before replacing the shield
• Remove shelves or clips that obstruct access, then snap or slide the shield into place
• Inspect the bulb and socket while replacing the shield; replace the bulb if needed
• Handle the shield carefully to avoid scratches or cracks; use only genuine replacement parts

The Temperature Sensor is an OEM replacement part for GE refrigerators, designed to accurately monitor and relay the temperature inside the refrigerator and freezer compartments to the electronic control board. By detecting the slightest changes in internal temperature, the sensor allows the control board to make real-time adjustments to the cooling system, activating the compressor and fans as needed to maintain optimal conditions for food preservation.

Over time, the temperature sensor can fail due to electrical issues, exposure to moisture, or general wear and tear. A malfunctioning sensor can lead to improper temperature regulation, affecting the efficiency of the refrigerator and the freshness of stored food.

Symptoms of a bad Temperature Sensor include:

• The refrigerator or freezer not maintaining the set temperature 
• The appliance running continuously or more frequently than normal
• Inaccurate temperature readings displayed  

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This top LED cover is the replacement light lens that protects and diffuses the refrigerator's top LED assembly for even interior lighting and a finished look. Replaces a cracked, yellowed, or missing lens to restore light distribution. What it does:

• Protects the LED module from dust, moisture, and impacts
• Diffuses and softens LED output for even interior illumination
• Prevents glare and visible hot spots from exposed LEDs
• Helps maintain a clean, finished appearance inside the appliance
• Can address symptoms like uneven lighting, visible LED bulbs, or a cracked/warped lens

• Disconnect power to the appliance before starting any work.
• Handle the lens gently to avoid scratching or cracking; wear gloves if needed.
• Removal/installation typically involves releasing retaining clips or removing a few screws—retain fasteners for reuse.
• Align the cover over the LED assembly and secure until it snaps or fasteners are tightened; test lighting after restoring power.