Parts for Hot Point HPS15BTHPRBB: Fresh Food Section Parts

This gasket supply foam is a replacement foam seal strip used to restore a refrigerator door or cabinet seal cushion for a tighter fit and improved temperature control. It helps reduce drafts and keeps fresh food fresher. What it does:

• Replaces worn or compressed foam that can allow air leaks around the door or compartment
• Restores the gasket's shape and cushioning to improve door sealing performance
• Helps reduce humidity build-up and cycling from frequent compressor starts
• Addresses symptoms such as visible gaps, cold loss, frost buildup, or higher energy use

• Remove old foam and any adhesive residue before installing the new strip
• Use appropriate gasket adhesive and follow manufacturer instructions if required
• Work with the appliance unplugged or power turned off; keep fingers clear of pinch points

Note: This control board includes the LED Lights for the refrigerator.

The Main Control Board is an OEM part for GE refrigerators. As the "brain" of the unit, it oversees operations of temperature controls, lighting, dispensers, and cycling to maintain freshness.

Causes of malfunctions involve cumulative chip degradation under high system demand over a refrigerator's lifespan. Exposure to moisture may corrode sensitive areas over time as well.

Symptoms include:

• Unresponsive touch panels and displays  
• Inability to regulate temperatures as programmed 
• Recurring errors requiring repeated door openings

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This leveling leg supports and stabilizes the refrigerator cabinet. Adjusting it keeps the unit level so doors align and seal correctly, helping reduce vibration and noise for smoother, more reliable performance.

• Threads into the base to support and level the appliance
• Allows height adjustment for proper door alignment and gasket contact
• Helps reduce rocking, vibration, and rattling noises
• Resolve issues like doors not closing fully, uneven gaps, or a wobbly cabinet

• Disconnect power and move the appliance carefully to access the leg
• Use a helper and protect flooring; tip the unit slightly and support it securely
• Unthread the old leg; hand-thread the new leg, then adjust as needed with a wrench
• Level front-to-back and side-to-side; avoid cross-threading or overtightening

This top hinge and pin assembly secures and guides a refrigerator door so it opens and closes smoothly. Replacing a worn hinge restores proper door alignment and helps the door seal correctly. What it does

• Supports the top of the refrigerator door and provides the pivot point for opening and closing
• Replaces a bent, worn, or broken hinge that can cause a sagging or misaligned door
• Helps stop rubbing, squeaking, or noisy door movement caused by a damaged hinge
• Restores correct door positioning to improve gasket sealing and cold retention

• Disconnect power and remove all items from the door before starting work.
• Support the door (have a second person if needed) while removing and installing the hinge to prevent injury or damage.
• Use basic hand tools; follow the refrigerator manufacturer's service instructions for proper alignment and torque.

This center hinge supports and pivots the refrigerator door at the middle of the cabinet. Replacing a bent or worn hinge restores smooth door movement and a reliable seal to help maintain proper temperatures.

• Supports door weight and provides the center pivot for opening and closing
• Helps maintain door alignment for even gasket contact
• Wear or damage can cause sagging, rubbing, squeaks, or doors that won't close/seal
• Visible bending, looseness, or a damaged hinge bracket/pin indicates replacement is needed

• Disconnect power and remove items from the door to reduce weight
• Support the door and have a second person assist; note the order of any spacers/washers
• Remove mounting screws, replace the hinge, and reinstall while keeping the door square
• Verify the door swings freely and the gasket seals evenly; adjust alignment as needed

This center hinge pin is the pivot shaft for the door at the middle hinge on select refrigerators. Replacing a worn or bent pin restores proper door alignment and smooth movement to help the door close and seal correctly.

• Serves as the door's pivot on the center hinge
• Maintains correct door height and alignment
• Helps the door open and close smoothly without binding
• Common symptoms: door sagging or rubbing, squeaking, wobbling, or not closing fully/popping open

• Unplug the refrigerator and remove items from the door to reduce weight
• Support the door before removing the center hinge bracket fasteners
• Install the new pin on the center hinge; reuse original spacers/bushings in their original order
• Reassemble, then check door alignment and gasket contact; adjust the hinge as needed per your model

The Hinge Washer is an OEM replacement part for GE refrigerators. It is located on the hinge between the refrigerator door and cabinet. The refrigerator door hinge washer works to evenly distribute weight and reduce stress and friction, enabling smooth and durable door operation.

Causes of a bad hinge washer are generally normal wear and tear. However, damage may also occur from unusually heavy loads being placed on the door, or accidents that impact the door and hinge assembly.

Symptoms of a bad refrigerator door hinge washer include:

• Increased resistance when opening or closing the door
• Excessive noise from the hinge area
• Visible wear marks on the hinge
• Over time and with heavy use, the washer can break down, resulting in improper balance and alignment of the door.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This bottom hinge supports the refrigerator door at the lower pivot point, keeping it aligned so it opens smoothly and seals correctly. Replace a worn hinge to restore proper closure and help maintain an airtight door seal.

• Provides the lower pivot and support for the door
• Helps maintain alignment for consistent gasket contact and smooth swing
• Wear or damage can cause door sagging, rubbing, or incomplete closure
• Misalignment can lead to air leaks and temperature fluctuations
• Clicking, grinding, or loose movement near the hinge may indicate wear

• Unplug the refrigerator; turn off water to the dispenser/ice maker
• Remove door bins/contents and support the door to prevent strain on wiring or tubing
• Remove the lower hinge cover, note shim/spacer locations, and transfer them to the new hinge
• Reinstall hardware, align the door, and ensure the gasket seals evenly all around

The Bottom Hinge Pin is an OEM replacement part for GE refrigerators. It facilitates the smooth and secure opening and closing of the refrigerator door. Positioned at the base of the door, this hinge pin ensures that the door is firmly attached, allowing it to swing open or closed with ease.

Causes of a bad Bottom Hinge Pin include wear and tear from regular use, corrosion, or mechanical damage that affects its structural integrity.

Symptoms of a bad Bottom Hinge Pin include:

• The refrigerator door not aligning properly
• Difficulty in opening or closing the door
• Unusual noises during the door’s operation
• Visible wear or damage to the hinge pin

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A replacement foam supply nozzle that directs detergent/soap flow into the wash chamber to help ensure proper dispensing and reduce excess suds. Fits select top-load and front-load washer dispenser assemblies. What it does:

• Channels detergent/soap from the dispenser into the wash tub for even distribution
• Helps prevent soap from pooling or over-foaming during the fill cycle
• Commonly replaces cracked, clogged, or warped nozzles that cause poor dispensing
• Can resolve symptoms like detergent leaking from the dispenser, excess suds, or uneven cleaning

• One foam supply nozzle

• Disconnect power (and water, if applicable) before beginning any repairs
• Remove dispenser assembly per manufacturer instructions; replace nozzle and reassemble carefully
• Inspect surrounding seals and clips and replace if damaged to prevent leaks

This control shield is a replacement console protector that helps shield the oven/range control assembly from heat, splashes and debris to keep the control area working cleanly. It restores the protective barrier behind the front control surface. What it does:

• Protects the control board and front console from heat, grease and food splatter
• Helps prevent damage that can cause intermittent or unresponsive controls
• Restores proper spacing and support behind the control panel
• Used when the original shield is warped, cracked or missing

• One control shield

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove the control panel or console trim per service instructions to access the shield
• Replace with matching orientation and secure using the original screws/clips; do not force or bend the part

The Light Switch is an OEM part for GE refrigerators. It controls the refrigerator's interior light, turning it on when the door is opened and off when the door is closed. This ensures energy efficiency and convenience, illuminating the refrigerator's interior for easy visibility while searching for items.

Causes of a bad light switch include mechanical wear from constant use, damage from an impact, or electrical issues.

Symptoms of a bad Light Switch include:

• The interior light does not turn on when the refrigerator door is opened
• The light stays on when the door is closed, potentially leading to overheating or melted plastic components in the light housing area
• Intermittent functioning of the light, indicating a loose or damaged switch

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a #8-32 hex-washer-head screw used to secure panels and components in compatible appliances. It provides a reliable fastener option for repairs where the original 8-32 screw has become stripped or lost. What it does:

• Fastens panels, brackets, and small components using a #8-32 threaded connection
• Hex washer head offers a wider bearing surface to resist pull-through
• Works where a short 1/2 in. length screw is required for proper engagement
• Commonly used in appliance assemblies and internal mounting applications

• Use the correct #2 Phillips or appropriate hex driver/socket to avoid stripping the head
• Do not overtighten; snug to secure parts without deforming components
• Turn off power and follow appliance safety guidelines before accessing internal areas
• Replace with an identical size and thread type if original screw shows evidence of thread damage.

This genuine fastener secures appliance components such as panels and brackets. Replacing a missing or stripped screw restores proper fit and helps reduce vibration or rattling. Features 12-24 threads and an approximate 0.785-inch length. What it does:

• Fastens panels, brackets, covers, and other hardware points in the appliance
• Helps maintain proper alignment and a tight fit of components
• Replaces damaged, stripped, or missing hardware
• Common symptoms include loose or rattling parts and hardware that won't tighten

• One screw

• Disconnect power before servicing; shut off water supply if working near water components
• Start the screw by hand to avoid cross-threading; replace one-for-one in the original location
• Use the correct driver bit for the head style; tighten snugly without overtightening into plastic or thin metal