Matthew M Greensboro , NC July 01, 2017 Appliance: Model 790.96549602 One day it didn't heat up for baking Watched the video here, took the leap that burner was the problem and ordered it. Also found another vid on you tube that was more specific to my Kenmore. Tip: find out how to take off the oven door. For mine it was very easy but not detailed in the APP vid. I followed instructions in APP vid but also first took off back panel of range and tested resistance of old burner to ensure that was truly the problem (as suggested by other YT vid). Also, dis/connecting the wires from the back is easier than from inside, I think. Everything went according to directions, and the oven heats properly now. Only downside is that by pulling out the range...it was so nasty underneath that I had to clean up underneath and behind it which hadn't been done in quite a few years. All in all - easy and so much cheaper, and easier than calling a repairman to come to the house in the middle of the day. I did this on MY schedule. Read More... 11 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Nut Drivers, Screwdrivers
Ronald S Monson , MA July 21, 2018 Appliance: Frigidaire Electric Range GLEFZ384HCA Heating element for the bake setting burned out Removed the bottom panel of the oven to expose the heating element then removed all screws to free it from the oven then pulled it out enough to disconnect the electrical wires to remove it completely its reverse process to reassemble very easy job to do after completing the oven still didn't work after diagnosing the sensor or thermostat it was the main board the relay must have shorted out when the element burned out but thanks to AppliancePartsPros it's all working now and it's very easy to do Read More... 7 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Screwdrivers
Charlie B Tampa , FL March 15, 2015 Appliance: Model 7906224404 Bottom element on oven blow out Pull out old one and replace with new one ,did all of the safety stuff(turn off oven breaker). Read More... 3 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Pliers
Elva B Gautier , MS October 20, 2017 Bad oven element Ordered new element. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers, Screwdrivers
Renee T Lindley , NY March 03, 2020 Appliance: Model DGEF3031KWB RANGE Eoc Ended up replacing the Lower element, probe finally the EOC And it fixed the problem. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Socket Set