Frigidaire 316419828 Overlay OEM Part

Turned off the power. Pulled out the stove. Removed back of upper part of stove. Removed old control board. Took photos with phone to make sure I got wires back on correctly. Only 1 wire was difficult to remove and required gentle rocking with pliers. Put the overlay on the new board. Placed all the clips and wires back on the new board. Turned on power to test. Tested ok. Turned power off and resecured the board and back on the stove. Repositioned the stove. Turned power back on. I then tested oven by placing at 375 with thermometer in oven. Tested perfect.

Removed the back metal cover, pulled the various plugs on the back of the old keypad, then unscrewed the keypad itself. Installation was the reverse of removal. Simple. Easy. And now my oven works again.

Got the part and it was the right one, then put it in the oven, and it works again. But I wouldn't recommend buying a Frigidaire product of any kind. I've bought four and two have had to be repaired within a year and a half.

I am a do-it-yourself before I call for service. I will watch You Tube Videos and do a little research before I call for service. More often than not, it is a simple fix. Initially, I replaced both heating elements and that did not fix the problem. The only other option was the control panel. I ordered the control panel from Appliance Pros along with the overlay. Once it arrived, I took a photo of the old panel installed prior to removing it so i could ensure I would install new panel correctly. I installed it, which was very easy. However, the part failed to work properly. None of the buttons would activate any of the features. I hooked up the old panel to make sure I had installed the new panel correctly. The buttons worked on the old panel so I knew the new panel was defective. I contacted Appliance Pros customer service and explained the issue. They shipped me new parts without any issue. I just installed the new panel and it works great! I have used Appliance Part Pros on several occasions and have always been very happy with their service and quick shipping.

It was easy to access and remove the old part. Just as easy to install the replacement. No more than 15 minutes (including cleaning the dirt behind the stove). It's disappointing that the old part is so fragile and stopped working but that's on the manufacturer. Given that the keypad is on the back wall behind the burners, I assume that the overlay and control board experience a lot of heat and grease when cooking which takes a toll on the parts.