Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Frigidaire Range / Cooktop / Oven Leg Or Foot

Best Seller
Frigidaire Leveling Leg Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509869

The Leveling Leg Assembly is an OEM part for Frigidaire ranges. This part provides stability by allowing users to adjust the height of the range, ensuring it is level and balanced on the floor.  

Causes of a bad leveling leg assembly can include wear from frequent adjustments, damage due to heavy loads, or breakage from accidental impacts.  

Symptoms of a bad leveling leg assembly include:

  • The range being uneven or wobbling
  • Difficulty in leveling the range using the legs
  • Noise or movement when the range is in use
  • Doors not aligning properly

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You No leveling leg on display model stove I purchased   Stephen F. • Rutherfordton , NC • July 28, 2019

Bought new leveling leg. Took longer to lay the appliance on the side and pick back up, than to install leg. Read more

More
$12.95
Compare At:
$15.41
You Save:
$2.46

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Foot Pad Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304475129

Grate Foot kit comes with 8 feet and adhesive. Single grate foot is 316246800.

Do-It-Yourself Stories from Customers like You Foot pads fell out of grate   Mark K. • Dalhart , TX • December 30, 2014

Ordered kit and replaced footpads. Easy to use and a good repair. Read more

More
$72.28
Compare At:
$86.01
You Save:
$13.73

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Leveling Leg Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 318175510

This machine screw adjusts and secures the leveling leg or bracket, helping you set the appliance stable and plumb. Replacing a stripped, bent, or missing screw restores a solid footing and makes accurate leveling possible.

  • Threads into the base or leveling bracket to raise or lower the appliance for proper leveling
  • Helps reduce rocking, wobbling, and vibration from an unlevel installation
  • Common signs of wear: stripped threads, bent hardware, corrosion, or a missing screw
  • Useful during installation or when the existing adjustment screw no longer holds
What's included: 1 screw Install notes:
  • Disconnect power; shut off gas before working
  • Support the appliance to relieve weight on the leveling point
  • Remove the damaged screw; inspect and clean mating threads
  • Start the new screw by hand to avoid cross-threading, then adjust height and snug

Do-It-Yourself Stories from Customers like You Purchased from an outlet store it was missing a burner cap and leveling leg   Alan J. • Marietta , GA • November 04, 2014

I placed the burner cap on the burner and screwed in the leveling leg. Easy! Read more

More
$31.95
Compare At:
$38.34
You Save:
$6.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Screw (Mounting)
Genuine Frigidaire part
By: Frigidaire
Part Number: 316272900

This factory screw secures panels, brackets, and other components in your cooking appliance. Replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and keep parts properly aligned during use.

  • Fastens components to maintain proper alignment and stability
  • Helps prevent vibration, rattling, and loose parts during operation
  • Replace if threads are stripped, the head is damaged, or the screw is missing
  • Commonly used to mount internal or exterior parts in ranges and wall ovens
Includes: 1 screw Installation notes:
  • Disconnect power and allow the appliance to cool; shut off gas supply if applicable
  • Use the correct driver bit to avoid stripping the screw head
  • Install in the original location and do not overtighten
  • If the receiving threads are damaged, repair or replace the mating part before installation

Do-It-Yourself Stories from Customers like You Foot broken   Joel K. • Hollidaysburg , PA • February 20, 2018

Bolt replaced. Read more

More
$19.50
Compare At:
$23.20
You Save:
$3.70

IN STOCK
Ships Today Guaranteed
Add to Cart
Frigidaire Leveler Leg
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303285762

 

More
$24.39
Compare At:
$27.02
You Save:
$2.63

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Frigidaire range/cooktop/oven leg or foot replacement parts are essential in ensuring your kitchen appliance functions optimally. While these components may appear minor, they play a vital role in maintaining stability and proper operation.

Your Frigidaire range or cooktop requires a level surface to ensure safety and efficiency, eliminating any wobbling or tilting issues. Frigidaire range parts, particularly the legs or feet, contribute to an even cooking surface, guaranteeing your meals come out perfectly each time. Utilizing replacement parts for your range or cooktop not only restores functionality but also prolongs the life of your appliance.

Selecting OEM replacement parts ensures you receive components specifically designed for your Frigidaire range, offering guaranteed compatibility and quality. OEM parts fit seamlessly with your appliance's specifications, delivering reliable performance.

When replacing worn-out legs or leveling your cooktop, you can easily find high-quality Frigidaire range/cooktop/oven legs or feet. These replacement parts help maintain a stable cooking surface, keeping your kitchen running smoothly.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store