Frigidaire Range / Cooktop / Oven Oven Control Or Thermostat

The Thermostat is an OEM replacement part for Frigidaire ranges. It monitors the oven's temperature and cuts power if temperatures surpass safe levels. The high-limit thermostat allows protection against overheating.

Causes of a bad thermostat include wear and tear over time, damage due to exposure to extreme heat, or malfunctioning electronic components.

Symptoms of a bad thermostat include:

• Oven does not start at all.
• Excessive temperature fluctuations
• Risk of overheating as thermostat fails to shut off gas or electric coils
• Smoking or burning smells from the oven

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.

The Oven Thermostat is an OEM part for Frigidaire ovens. It regulates the oven temperature by turning the heating elements on and off to maintain the set temperature. This ensures that your oven cooks food evenly and accurately according to your desired settings.

Causes of a bad thermostat can include wear and tear from regular use, electrical faults, or damage from power surges. Over time, the thermostat's internal components can degrade, leading to inaccurate temperature control.

Symptoms of a bad thermostat include:

• Oven not reaching the set temperature
• Oven overheating
• Inconsistent cooking results
• The oven not turning on

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Thermostat is an OEM part for Frigidaire ranges. This part regulates the oven's temperature by cycling the heating elements on and off to maintain the desired heat level, ensuring precise cooking and baking results.

Causes of a bad thermostat can include wear and tear from regular use, electrical issues such as short circuits, or physical damage to the sensor or wiring.

Symptoms of a bad thermostat include:

• Inaccurate oven temperatures
• The oven not heating up to the set temperature
• The oven overheating
• Uneven cooking or baking results

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement thermostat is a temperature-sensitive switch used in select cooking appliances. It opens or closes at a fixed setpoint to control or limit heat, helping protect components and restore dependable operation of the affected circuit. What it does:

• Senses temperature at its mounting point and opens/closes electrical contacts at a designed setpoint
• Controls power to a heating or related circuit (such as an element or fan) to maintain safe operation
• Helps prevent overheating and protects internal components
• Failure can cause no heat, heat that shuts off prematurely, or a related circuit that won't turn on/off

• 1 thermostat

• Disconnect power to the appliance before servicing
• Access location varies by model; refer to your service manual for exact placement
• Move wires one at a time from the old part to the new to maintain correct connections
• Reinstall in the same orientation; ensure firm mounting for proper temperature sensing and secure electrical connections

This temperature-activated limit thermostat is a safety switch for the range/wall oven that reacts to excessive heat to protect internal wiring and controls. Replacing a failed thermostat can restore reliable heating and reduce nuisance shutdowns during baking or self-clean.

• Monitors oven/cabinet temperature and switches its circuit at a calibrated threshold to protect components
• Failure symptoms can include: no bake or broil heat, oven shutting off mid-cycle, or loss of heat after a self-clean cycle
• On some models, a failed thermostat may also affect the cooling fan (not running or running unexpectedly)
• Can be checked with a continuity test per your model's tech sheet

• Disconnect power at the breaker and let the appliance cool completely before service
• Location varies by model; commonly mounted to the rear of the oven cavity, upper plenum, or behind the back panel
• Photograph wiring and transfer leads one at a time; reuse original mounting hardware/orientation
• Never bypass a safety thermostat; replace only with the specified part number

This thermostat regulates refrigerator temperature to help maintain consistent cooling and proper food storage. It replaces a faulty control to restore normal cycling and temperature response. What it does:

• Senses cabinet temperature and tells the compressor when to run to maintain the set temperature
• Helps prevent temperatures from drifting too warm or too cold
• Can stop continuous compressor operation when the thermostat is functioning correctly
• Commonly replaced when the fridge won't reach or hold set temperatures

• Disconnect power to the appliance before starting any work
• Handle electrical connections carefully and match wire locations exactly
• Mount and secure the thermostat in the original location; use OEM hardware if provided

This oven thermostat senses and regulates oven temperature so food cooks evenly and the range reaches set temperatures. It replaces a failed temperature control to restore accurate heating and cycle behavior. What it does:

• Closes and opens the control circuit to maintain the oven at the selected temperature
• Can correct symptoms such as oven not reaching set temperature, overheating, or excessive cycling
• Works with the oven's control system and heating elements to stabilize bake and broil operations
• Mechanical design — avoid bending or damaging the sensing element/capillary

• One oven thermostat

• Disconnect power to the appliance before starting any service
• Handle the thermostat and sensing element carefully; do not kink or sharply bend the capillary
• Verify proper thermostat mounting and oven cavity seals for accurate temperature control

A safety thermostat that monitors and limits temperature at the range/stove backguard to help prevent overheating. Replaces a failed safety limiter to restore proper temperature control and safety operation. What it does:

• Acts as a temperature-limiting safety device for the range backguard assembly.
• Opens the circuit when temperatures exceed safe limits to prevent overheating.
• Commonly replaced when the oven or control fails to maintain temperature or shuts off unexpectedly.
• Helps address overheating, intermittent heating, or safety-trip symptoms tied to the backguard area.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Access may require removing the backguard panel and control housing; keep track of fasteners and wire routing.
• Verify electrical connections are secure and intact; replace only with correct part number.

This oven thermostat regulates baking and roasting temperatures on non-self-cleaning ranges so your oven heats to the set temperature. Designed to restore accurate temperature control and consistent cooking results. What it does:

• Senses oven temperature and signals the control to cycle the heating element on and off
• Helps correct ovens that run too hot, too cold, or show inconsistent temperatures
• Supports basic mechanical temperature control on non–self-clean models
• Commonly used when the oven won't maintain set temperature or cooking results vary

• Disconnect power to the range before replacing this part to avoid electric shock
• Handle the thermostat capillary and probe carefully — avoid kinks or sharp bends
• Verify temperature with an oven thermometer after installation

This oven thermostat senses oven temperature and signals the control system to maintain set heat levels for consistent cooking. It replaces a failed temperature-sensing control to help ovens reach and hold desired baking and roasting temps. What it does:

• Regulates oven temperature by opening/closing the thermal switch at set points
• Helps correct symptoms like oven not heating, overheating, or temperature fluctuations
• Works with the oven control and heating elements to stabilize cooking temps
• Mechanical design suited for direct temperature sensing inside the oven cavity

• Disconnect power to the range before attempting any service to avoid shock
• Access may require removing the oven back panel or control panel; follow the service manual
• Handle the temperature sensing probe and capillary tube carefully to avoid kinks or damage