Frigidaire Range / Cooktop / Oven Glass Top Or Cook Top

Main Top - w/Black Glass

This steel-and-glass maintop is the upper cooking surface that supports burners and cookware while providing a finished appearance. Replaces a damaged or worn maintop to restore safe, level support and proper burner alignment. What it does:

• Provides the main cooking surface and mounting points for burners and grates
• Restores a flat, heat-resistant surface for pots and pans
• Helps prevent burners from shifting or tilting during use
• Improves appearance by replacing cracked, dented, or warped tops

• Verify power is disconnected and range is cool before starting work
• Use proper tools to remove burner grates, trim pieces, and mounting screws
• Handle glass surfaces carefully to avoid chipping; support the top during removal and installation

This main top is the flat cooktop surface that mounts over a range's burner box to provide a stable, finished cooking surface and protect internal components from spills and debris. It restores a level, secure area for burners and cookware. What it does:

• Covers and protects the range's internal burner box and wiring from spills and food debris
• Provides a stable, level surface for burner grates and cookware
• Helps maintain proper airflow and fit for burner components
• Replaces warped, dented, or corroded tops that can interfere with burner alignment or cookware stability

• Disconnect power to the appliance before beginning any service
• Remove burner grates, knobs and other removable components to access mounting screws
• Handle carefully to avoid sharp edges; lift and set into place, aligning mounting holes before fastening

This smooth-top glass is the replacement cooktop surface that restores a flat, easy-to-clean cooking area and protects the underlying burners and components. Ideal when the original glass is cracked, scratched, or otherwise damaged. What it does:

• Replaces damaged or broken cooktop glass to restore a smooth cooking surface
• Provides a sealed, easy-to-wipe surface that helps contain spills and debris
• Maintains correct spacing and protection for the heating elements beneath the glass
• Helps eliminate rattling or uneven cooking caused by a warped or broken top

• Disconnect power to the range before starting work to avoid shock risk
• Use proper supports and soft padding to prevent chipping during removal/installation
• Verify alignment and secure mounting to avoid stress points that can cause cracking

This is a Frigidaire main top for electric ranges. It sits beneath and holds the range's heating elements. If this part is damaged, it's usually obvious. It may dent or in some extreme cases, rust, and should be replaced if it's no longer able to hold heating elements.Before installing this part, make sure that power to the stove is cut, and do not begin repairs until the range is completely cool. A screwdriver, nut driver, and small dowel rod may be needed to install this part. Start by removing each heating element and drip pan. The old cooktop should be held in place with a number of screws or mounting brackets, the first of which may need to be accessed from inside the oven. Mounting hardware must be removed from the old cooktop and installed in the new one before putting the new cooktop in place.This is a genuine OEM part compatible with ranges from Frigidaire brands, including Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and others. This product includes no additional hardware.

This main top is the cooktop surface that covers and protects the range's internal components while providing a stable surface for burners and cookware. It restores a secure, finished appearance and helps keep controls and wiring shielded. What it does:

• Covers and protects internal oven/range components from spills, grease, and debris
• Provides a stable surface for burners, grates, and cookware to sit on
• Replaces a cracked, chipped, warped, or dented cooktop that won't sit flush
• Helps prevent food and liquids from falling into the appliance's control area or cavities

• One main top

• Disconnect electrical power (and shut off gas for gas ranges) before starting work
• Remove burners, grates, and any trim pieces as needed to access and lift the old top
• Handle the top carefully to avoid chipping or scratching the finish during removal and installation
• Secure the replacement top per the manufacturer's fastener locations and verify burners/grates align properly before use

This is a smoothtop assembly intended for use with ranges by major manufacturers. This component is located on top of the stove and protects the wiring and heating elements on the interior. The smoothtop assembly is made of strong glass. This part can become damaged and may be unsafe for use. If this happens, the smoothtop assembly will need to be replaced.A set of basic tools will be needed to replace this part. Work gloves can also be useful for preventing injuries from broken glass. First, turn off the range. Unplug it from the wall and make sure it is cool to the touch. Open the oven to remove the screws that hold the smoothtop assembly in place. Pick it up and disconnect the heating elements and wires. Next, install the new smoothtop assembly and hook back up the internal components. Plug in the appliance before use.This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold on an individual basis. The smoothtop assembly is made to be used with ranges, ovens, and stoves created by Ikea, Frigidaire, and Crosley.

This Main top is the oven's upper cabinet panel that provides the flat surface and structural support for the cooktop area, restoring proper fit and appearance. It replaces a bent, damaged, or corroded top to help the range sit and seal correctly. What it does:

• Replaces the damaged or warped top panel that supports the cooktop and front controls
• Restores a flat, even surface to prevent gaps and improve alignment with adjoining panels
• Helps prevent heat and moisture from reaching internal components through damaged metal
• Commonly replaced when the top shows dents, rust, or mounting-point damage

• One Main top (upper cabinet panel) as shown

• Basic disassembly of the cooktop and control panel is typically required; disconnect power before starting
• Handle edges carefully; metal panels can be sharp
• Keep hardware organized for reassembly; reuse original screws and brackets unless damaged

Color: Black

This main top is the replacement cooktop surface for select electric ranges, restoring a flat, secure mounting area for burners and controls and improving appearance and function. What it does

• Replaces a damaged, dented, or warped cooktop top so burners and components mount correctly
• Restores a flush, stable surface that helps prevent gaps or misalignment around elements
• Addresses visible cosmetic damage like deep scratches, chips, or paint loss
• Helps eliminate rattling or instability caused by a bent or loose top

• One main top

• Disconnect power to the range before starting and verify the unit is de-energized
• Removal typically requires lifting the front edge and unfastening screws or clips; some models may require removing the control panel first
• Handle carefully to avoid damaging trim or finish; two people may be helpful for positioning larger tops
• Use manufacturer-recommended fasteners and verify alignment before fully tightening

This main top is the stove/range cooktop surface that covers and protects the internal cooktop area while providing a finished black appearance. Replaces a scratched, dented or damaged top to restore a flush, clean cook surface look. What it does:

• Covers and protects the range's internal components and burner openings from spills and debris.
• Provides a finished black surface for the cooktop and supports burner trim and grates.
• Commonly replaces tops that are cracked, bent, heavily scratched, or cosmetically worn.
• Helps reduce heat and spill migration into the cabinet and control areas when properly installed.

• Disconnect electrical power (and gas supply, if applicable) before starting work.
• Remove burners, grates, and control panel components as required to access mounting screws; keep track of fasteners.
• Handle edges carefully — sheet metal can be sharp. Use gloves and eye protection.

This main top assembly is the finished cooktop surface that supports burners and controls while protecting internal components. It restores a flat, secure surface for safe cooking and proper burner alignment. What it does:

• Covers and protects the range's internal components under the cooktop
• Provides mounting/seat locations for surface burners, grates, and trim
• Restores proper burner alignment and prevents debris from entering the cabinet
• Helps reduce heat or smoke caused by damaged or warped tops

• Disconnect power to the appliance before starting any work
• Remove burner grates, knobs and any trim pieces before replacing the top
• Handle the top carefully—edges can be sharp and finish can be easily scratched