Frigidaire Range Hood Filter

Keep your appliance protected and performing as designed. This replacement filter sits in the unit's filtration path to capture debris and contaminants, helping guard internal components and support consistent operation. What it does:

• Captures particles per your model's design to reduce internal buildup
• Helps maintain proper performance and circulation within the system
• Common failure signs include reduced performance, unusual odors, or visible residue
• Replace if torn, warped, saturated, or excessively dirty

• 1 filter

• Disconnect power before servicing; allow any hot surfaces to cool
• Open the access panel or grille and note the filter's orientation
• Fully seat the new filter and engage any tabs/clips as designed
• Follow your owner's manual for cleaning/replacement intervals; do not operate without a required filter

This Filter is an OEM part for Frigidaire range hoods. It plays a vital role in maintaining the efficiency and cleanliness of your range hood by trapping grease, smoke, and other airborne particles during cooking. 

The effectiveness of a range hood filter can diminish over time due to the accumulation of grease and debris, which can impede airflow and reduce the hood's ability to extract unwanted cooking fumes.

Symptoms of a dirty or failing filter include:

• Reduced suction and efficiency in smoke and odor removal.
• Grease buildup on the filter is visible upon inspection.
• The range hood becoming noisier, indicating strain on the motor.
• Persistent odors in the kitchen, not effectively cleared by the hood.
• Poor overall air quality in the cooking area.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This replacement filter captures everyday particles so your appliance can vent and circulate properly. Replacing a torn, saturated, or clogged filter helps restore airflow, reduce buildup, and keep internal components cleaner for reliable performance. What it does:

• Traps debris from the airstream to help prevent buildup inside the unit
• Helps maintain proper airflow and ventilation performance
• Replace when saturated, damaged, or per your model's maintenance schedule
• Common symptoms: weak venting/airflow, lingering odors, residue near vents, or a visibly dirty/damaged filter

• 1 filter

• Disconnect power before servicing
• Open the grille or access panel; note the filter's orientation before removal
• Seat the new filter fully; do not operate the appliance without a filter installed
• Edges may be sharp—wear cut-resistant gloves

This replacement air filter screens dust and lint before they reach the evaporator coil and blower, helping maintain proper airflow, cooling performance, and a cleaner system.

• Traps airborne dust/lint to protect the coil and fan
• Helps maintain airflow and cooling efficiency
• Supports cleaner indoor air and reduces coil fouling
• A clogged or damaged filter can contribute to weak airflow, reduced cooling, icing, or musty odors

• Disconnect power before opening the front grille or servicing the unit
• Open the grille, slide the old filter out, and fully seat the new filter in the track with the correct orientation
• Do not operate the appliance without a filter in place
• While accessible, check and gently clean the return area per manufacturer guidance

The Filter is an OEM replacement part for Frigidaire range hoods. It is designed to capture grease, smoke, and airborne particles generated during cooking, helping to maintain clean air in your kitchen and protect the internal components of your range hood. The filter plays a critical role in ensuring the efficiency and longevity of the appliance.

Causes of a bad filter can include prolonged use without cleaning, saturation with grease and dirt, or physical damage such as tears or warping. Over time, a clogged or damaged filter will lose its effectiveness, leading to diminished performance of the range hood.

Symptoms of a bad filter include:

• Reduced airflow or poor suction
• Lingering cooking odors in the kitchen
• Excessive grease accumulation on nearby surfaces
• Visible damage or deformation in the filter

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

A replacement refrigerator water filter that helps reduce taste and odor issues and improves clarity of drinking water. Fits inline into the refrigerator's water/ice system to restore cleaner-tasting water. What it does:

• Filters impurities that can cause off taste or odor in dispenser water and ice
• Helps reduce visible particles and cloudiness in dispensed water
• Supports proper water flow for the dispenser and ice maker when functioning correctly
• Commonly replaced when water tastes bad, smells, or appears cloudy

• Replace with manufacturer-recommended filter and follow refrigerator-specific instructions
• Turn off the water supply and dispense water briefly to depressurize before removing the old filter
• After installation, flush several gallons of water per manufacturer guidance to clear air and loose carbon
• Dispose of the used filter according to local regulations; check for any refrigerator-specific priming steps

This refrigerator water filter cartridge reduces common water tastes and odors and helps protect your ice and dispense lines. It's a direct-replacement cartridge designed for easy swap-out to restore clearer, better-tasting water. What it does:

• Filters out chlorine taste and odor for improved drinking water flavor
• Captures sediment and particulate to help keep ice and dispenser lines cleaner
• Helps maintain normal water flow and clear ice when operating properly
• Fits inline with your fridge's water system to provide filtered water on demand

• Replace the cartridge according to your refrigerator owner's manual or when water taste, odor, or flow declines
• Flush system after installation per manufacturer guidance to remove trapped air and loose carbon fines
• Turn off water supply or follow appliance-specific safety steps before removing the old filter

This refrigerator water filter cartridge replaces a factory filter to help restore clearer, better-tasting water and ice. It's a direct-replacement cartridge designed for simple swap-out maintenance. What it does

• Filters tap water that serves the fridge dispenser and ice maker to improve taste and reduce sediment and chlorine-related odors.
• Helps prevent sediment and debris from reaching dispenser and ice components.
• Common signs you need this part: reduced water flow, noticeable change in water or ice taste, or filter-change indicator.

• One refrigerator water filter cartridge.

• Turn off the water supply and relieve dispenser pressure before removing the old filter.
• Follow the fridge maker's published instructions for removal and insertion; ensure the filter seats and locks fully.
• Flush several glasses of water after installation to clear trapped air and carbon fines.
• Check for leaks at the filter housing and connections before finishing.