Range Hood Filter

The Aluminum Grease Filter is an OEM part for Bosch range hoods. It is designed to capture and filter out grease particles from the air, preventing them from accumulating on the internal components of the range hood and ensuring efficient ventilation. This chrome-colored filter measures approximately 30 inches wide and 9.5 inches deep. 

The aluminum grease filter should be replaced when it becomes clogged, damaged, or worn out. Causes of a bad grease filter can include prolonged exposure to grease and cooking residues, improper cleaning, or physical damage such as dents or warping.

Symptoms of a bad grease filter include:

• Reduced ventilation efficiency
• Grease accumulation on kitchen surfaces
• Unpleasant odors emanating from the range hood
• Visible damage or deformation of the filter

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Charcoal Filter is an OEM part for GE microwaves. It is designed to remove odors and impurities from the air that is recirculated during microwave operation. The charcoal filter plays a crucial role in maintaining a clean and odor-free kitchen environment by trapping grease and odors from the cooking process.

You should replace the charcoal filter regularly as part of routine maintenance. Causes of a bad charcoal filter can include saturation from grease and food particles, reduced effectiveness due to prolonged use, or physical damage.

Symptoms of a bad charcoal filter include:

• Persistent odors in the kitchen
• Visible grease buildup on the filter
• Reduced ventilation efficiency

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grease Filter is an OEM part for Whirlpool range hoods. This filter captures grease, smoke, and other particles generated during cooking, preventing them from settling on kitchen surfaces and ensuring the air remains clean and fresh. The filter measures approximately 18” long by 12” wide. 

Causes of a bad Grease Filter include accumulation of grease and debris over time, which can lead to inefficiency in air filtration and ventilation. 

Symptoms of a bad filter include:

• Poor exhaust performance, leading to lingering odors or smoke in the kitchen
• Visible grease buildup on the filter surface
• Difficulty fitting the filter into its slot due to damage or deformation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Grease Filter is an OEM part for Whirlpool range hoods. This part traps grease particles from the air as it circulates through the range hood, preventing grease buildup on the blower and other internal components, thus maintaining the efficiency and longevity of the range hood.

Causes of a bad grease filter can include clogging from excessive grease accumulation, physical damage from improper cleaning or handling, and general wear and tear over time.

Symptoms of a bad grease filter include:

• Reduced air flow from the range hood
• Visible grease buildup on or around the filter
• Unusual odors persisting in the kitchen
• Filter appearing worn or damaged

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Grease Filter is an OEM part for GE range hoods. It is designed to trap grease and other particles from the air that circulates through your cooking appliances, preventing buildup within the ventilation system. 

Causes of a bad Grease Filter can include saturation from accumulated grease and debris, which can limit its effectiveness and airflow. Over time, the filter can also become damaged or corroded, reducing its ability to capture and hold grease particles.

Symptoms of a bad Grease Filter include:

• Visible grease buildup on the filter surface.
• Reduced effectiveness in venting smoke or cooking odors.
• Increased smoke and odors lingering in the kitchen during and after cooking.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Range Filter is an OEM part for Bosch range hoods. It is designed to trap grease, smoke, and other airborne particles during cooking, helping to keep the kitchen air clean and preventing buildup on the internal components of the range hood. It measures approximately 10-3/4" x 24-1/2".

Common causes of a bad range filter include accumulation of grease and debris from regular cooking, wear and tear from cleaning, and physical damage such as bends or breaks in the filter material.

Symptoms of a bad range filter include:

• Reduced airflow or ventilation efficiency
• Excessive smoke or odors lingering in the kitchen
• Visible grease buildup on the filter
• The filter appearing damaged or misshapen

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The 36" Filter is an OEM replacement part for GE range hoods and ventilation systems. It is designed to capture and remove grease, smoke, and odors from the air, ensuring a clean and fresh kitchen environment.

Symptoms of a clogged or faulty range hood filter include:

• Reduced airflow and poor ventilation performance
• Visible buildup of grease or residue on the filter surface
• Strong cooking odors lingering in the kitchen

Causes of a bad filter can range from normal accumulation of grease and grime over time, exposure to high heat or humidity, or physical damage from improper cleaning or handling.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore range hood models. 

The 30" Filter is an OEM part for GE range hoods and microwaves, specifically designed to ensure a clean and efficient ventilation system. This filter is essential for trapping grease, smoke, and cooking odors, creating a cleaner kitchen. 

Causes of a faulty 30-inch filter may vary. Grease buildup and debris reduce airflow and efficiency, while damage like bending or tearing can hamper contaminant trapping. Regular use and cleaning may weaken the filter, increasing the risk of failure.

Symptoms of a bad 30" Filter include:

• Odors or smoke lingering in the kitchen longer than usual.
• Increased noise from the ventilation system
• Visible signs of saturation or damage to the filter

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Filter is an OEM replacement part for GE built-in range hoods. It captures grease, smoke, and other cooking emissions before safely venting air outside. This filter measures approximately 23 1/2" X 6".

Causes of filter clogging generally involve accumulated residue after periods of frequent cooking. Not cleaning or replacing as use requires also accelerates blockages.

Symptoms of a blocked filter may include:

• Reduced suction power and airflow
• Difficulty seeing through a dirty filter grate
• Excessive grease buildup on interior surfaces and appliances below

This GE replacement is also compatible with brands like Hotpoint, RCA and select Kenmore hoods

Color: chrome. Measures about 12-1/2 inches wide by 5 inches high.

The Filter is an OEM replacement part for Broan range hoods. It is designed to trap grease, smoke, and other airborne particles during cooking, helping to keep the air in your kitchen clean and your range hood operating efficiently. This filter ensures that debris does not accumulate within the range hood, maintaining its performance and preventing potential damage.

You should replace the filter if it becomes clogged, damaged, or too worn to function effectively. Causes of a bad filter can include prolonged use without cleaning, exposure to excessive grease and moisture, or physical damage during handling or cleaning.

Symptoms of a bad filter include:

• Reduced airflow or suction from the range hood
• Persistent grease buildup on surrounding surfaces
• Lingering cooking odors
• Visible tears, holes, or warping in the filter

This OEM Broan part is also compatible with some Nutone range hoods.

Keep your vent hood performing at its best. This 3-pack of recirculation filters refreshes the air in non-ducted installations by capturing fine cooking byproducts, helping the hood clear steam and smoke and reduce lingering kitchen odors.

• Filters air when the hood is set up for non-ducted/recirculating operation
• Helps capture fine particles from cooking to reduce haze and odors
• Replace if saturated, warped, damaged, or excessively discolored
• Common symptoms of a spent filter set: lingering odors after cooking, smoke not clearing as well, visible buildup on filters

• Disconnect power to the hood and allow components to cool before servicing
• Access filter area (location and retention method vary by model); note orientation of existing filters
• Release tabs/latches, remove old filters, and seat the new filters securely in the same orientation
• Refer to your model's use & care guide for specific replacement guidance and intervals

The Range Hood Filter is an OEM part for Broan range hoods. It is a critical component that captures grease, smoke, and other airborne particles generated during cooking, helping to improve indoor air quality and prevent buildup within the range hood system. The dimensions of the filter are 6 1/4" x 23 5/8".

Causes of a bad range hood filter include normal wear and tear over time, as it becomes saturated with grease and particles, or physical damage from improper cleaning or handling.

Symptoms of a filter needing replacement include:

• Reduced airflow or suction power from the range hood
• Visible buildup or clogging of the filter material
• Increased cooking odors or smoke lingering in the kitchen area
• Difficulty in removing or cleaning the filter effectively

This OEM replacement filter is designed specifically for compatibility with Broan range hood models.

This replacement range hood filter maintains airflow and helps keep the cooking area cleaner by capturing airborne grease and particulates drawn through the hood. Replace when saturated or damaged to keep your hood performing as intended.

• Filters air drawn through the hood to trap grease and cooking byproducts
• Helps maintain consistent airflow and capture of smoke/steam
• Common replacement signs: heavy grease buildup, reduced ventilation performance, or a warped/loose filter
• Protects the blower and ducting by preventing debris from entering

• Disconnect power to the hood and allow all surfaces to cool; sheet-metal edges can be sharp—wear gloves
• Release the filter latch or tabs and slide out the old filter
• Install the new filter with the tab/latch oriented correctly; ensure it seats fully
• Restore power and verify the filter is secure and airflow is unobstructed

This activated charcoal filter restores odor reduction for recirculating range hoods. Replacing a saturated filter helps your hood control cooking smells and maintain effective performance in non-ducted installations.

• Adsorbs cooking odors when the hood is set to recirculate (non-ducted)
• Helps maintain capture performance; replace when odor removal declines
• Common signs it's due: lingering odors, heavy discoloration, or musty smell when the fan runs
• Not washable; designed for periodic replacement only

• Disconnect power to the hood before servicing
• Remove the grease filter to access the charcoal filter location/retainer
• Seat the new filter fully and secure per your hood's design; follow any airflow markings if present
• Reinstall the grease filter, restore power, and test the fan

This replacement grease filter captures airborne grease and cooking residue in your appliance's venting system, helping protect the blower and ductwork while maintaining effective ventilation and airflow.

• Traps grease and food particles carried by the exhaust airstream
• Helps sustain proper airflow and reduce smoke and lingering odors
• Replace if mesh is torn, warped, missing, or remains clogged after cleaning
• Common symptoms include persistent smoke/odors, visible grease buildup, or a loose/rattling filter

• Disconnect power before servicing and allow the appliance to cool completely
• Open the filter access, release the retaining latch or screws, and remove the old filter
• Slide the new filter into place, matching the original orientation/tabs
• Ensure the filter is fully seated and secured; do not operate the unit without a filter