Frigidaire Range Hood Parts

The Motor with Capacitor is an OEM component specifically designed for Frigidaire range hoods. This assembly provides the necessary power to circulate air and remove unwanted smoke and odors from the cooking area.

Causes of motor failure can include wear from years of continuous use, grit or dust buildup reducing efficiency over time, or damage from liquid ingress compromising electronics. 

Symptoms of a faulty motor and capacitor assembly include:

• Reduced or ineffective suction and ventilation  
• Abnormally loud operation noises from the hood
• Failure to start or intermittent functionality  

This OEM Frigidaire part is also compatible with some Kenmore and GE range hood models. Replacing worn components restores proper air transfer vital for safely venting the cooking zone. Timely maintenance preserves optimal hood performance.
 

The Blower Assembly is an OEM part for Frigidaire range hoods. It is the part that draws out smoke, odors, and cooking fumes from the kitchen area. 

Causes of a bad Blower Assembly can range from wear and tear over time, accumulation of grease or debris obstructing the fan blades, to electrical or motor issues preventing proper operation.

Symptoms of a bad Blower Assembly include:

• Reduced suction or airflow from the range hood
• Loud or excessive noise during operation
• The fan not turning on or running erratically
• Potential overheating or motor failure

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Size: 3/4 inch od x 1/4 inch id.

Keep your appliance protected and performing as designed. This replacement filter sits in the unit's filtration path to capture debris and contaminants, helping guard internal components and support consistent operation. What it does:

• Captures particles per your model's design to reduce internal buildup
• Helps maintain proper performance and circulation within the system
• Common failure signs include reduced performance, unusual odors, or visible residue
• Replace if torn, warped, saturated, or excessively dirty

• 1 filter

• Disconnect power before servicing; allow any hot surfaces to cool
• Open the access panel or grille and note the filter's orientation
• Fully seat the new filter and engage any tabs/clips as designed
• Follow your owner's manual for cleaning/replacement intervals; do not operate without a required filter

This small door-activated microswitch signals the control that the microwave door is fully closed so cooking can start, and it opens the circuit when the door is opened. Replacing a worn switch restores reliable, safe start/stop operation. What it does:

• Detects door position and permits operation only when the door is closed
• Interrupts power when the door opens during a cycle
• Helps resolve won't-start unless pressing on the door, starts then immediately stops, or intermittent operation when opening/closing the door
• In some cases, prevent fuse or breaker trips caused by a failing interlock switch

• 1 switch

• Disconnect power; if servicing a microwave, the high-voltage capacitor can retain a dangerous charge—discharge it safely before working
• Access the interlock switch bracket near the door latch; note wire positions and switch orientation
• Move one wire at a time to the new switch and ensure the actuator aligns with the door latch
• Inspect the latch and mounting bracket; replace if worn or damaged

This replacement blower wheel circulates air through the dryer to restore proper airflow for efficient drying and venting. Replacing a worn or damaged wheel can reduce noise and help prevent overheating caused by restricted airflow. What it does

• Spins on the dryer motor shaft to pull air through the drum and exhaust vent.
• Restores airflow to address long dry times and poor drying performance.
• Reduces rattling or scraping noises caused by a cracked, bent, or imbalanced wheel.
• Helps prevent overheating and burning odors that can occur when airflow is restricted.

• Disconnect power (and gas supply for gas dryers) before beginning any repair.
• Access may require removing the dryer drum or front panel depending on model.
• Inspect the motor shaft, mounting hub, and set screw for wear; ensure the wheel is seated and tightened to the shaft.
• Wear gloves and eye protection; check the exhaust duct for obstructions after installation.

This replacement filter captures everyday particles so your appliance can vent and circulate properly. Replacing a torn, saturated, or clogged filter helps restore airflow, reduce buildup, and keep internal components cleaner for reliable performance. What it does:

• Traps debris from the airstream to help prevent buildup inside the unit
• Helps maintain proper airflow and ventilation performance
• Replace when saturated, damaged, or per your model's maintenance schedule
• Common symptoms: weak venting/airflow, lingering odors, residue near vents, or a visibly dirty/damaged filter

• 1 filter

• Disconnect power before servicing
• Open the grille or access panel; note the filter's orientation before removal
• Seat the new filter fully; do not operate the appliance without a filter installed
• Edges may be sharp—wear cut-resistant gloves

This replacement air filter screens dust and lint before they reach the evaporator coil and blower, helping maintain proper airflow, cooling performance, and a cleaner system.

• Traps airborne dust/lint to protect the coil and fan
• Helps maintain airflow and cooling efficiency
• Supports cleaner indoor air and reduces coil fouling
• A clogged or damaged filter can contribute to weak airflow, reduced cooling, icing, or musty odors

• Disconnect power before opening the front grille or servicing the unit
• Open the grille, slide the old filter out, and fully seat the new filter in the track with the correct orientation
• Do not operate the appliance without a filter in place
• While accessible, check and gently clean the return area per manufacturer guidance

The Filter is an OEM replacement part for Frigidaire range hoods. It is designed to capture grease, smoke, and airborne particles generated during cooking, helping to maintain clean air in your kitchen and protect the internal components of your range hood. The filter plays a critical role in ensuring the efficiency and longevity of the appliance.

Causes of a bad filter can include prolonged use without cleaning, saturation with grease and dirt, or physical damage such as tears or warping. Over time, a clogged or damaged filter will lose its effectiveness, leading to diminished performance of the range hood.

Symptoms of a bad filter include:

• Reduced airflow or poor suction
• Lingering cooking odors in the kitchen
• Excessive grease accumulation on nearby surfaces
• Visible damage or deformation in the filter

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This control panel is the front console that holds the oven/range controls and user interface, restoring a clean, functional control surface and allowing proper operation of the cooktop/oven controls. What it does

• Houses the control buttons, knobs, and display for the range/oven
• Provides the mounting surface and openings for switches, touchpads, and indicator lights
• Replaces a cracked, scratched, or cosmetically damaged console to restore appearance
• Can resolve issues where buttons or controls are loose, missing, or no longer responding due to physical damage

• Disconnect power (unplug or turn off house circuit breaker) before starting any repair
• Access usually requires removing backguard/console screws and unplugging electrical connectors
• Handle carefully to avoid scratching the finish or damaging clips and mounting tabs

This replacement lamp restores clear illumination so you can see the appliance interior and monitor items at a glance. Swap a failed bulb to bring back dependable lighting for everyday use. What it does:

• Provides illumination when the appliance calls for light (door opens or light button/switch engaged)
• Replaces a burned-out, broken, or dim bulb to restore visibility
• Helps you see contents and monitor cooking progress
• Common symptoms: no light, flickering, or intermittent operation

• One replacement lamp

• Disconnect power and allow the lamp area to cool before servicing
• Access the bulb per your user manual; remove any lens or cover carefully
• Handle glass with gloves or a clean cloth to avoid skin oils on the bulb
• Match the bulb type/wattage specified on the appliance rating label; do not exceed

A replacement refrigerator water filter that helps reduce taste and odor issues and improves clarity of drinking water. Fits inline into the refrigerator's water/ice system to restore cleaner-tasting water. What it does:

• Filters impurities that can cause off taste or odor in dispenser water and ice
• Helps reduce visible particles and cloudiness in dispensed water
• Supports proper water flow for the dispenser and ice maker when functioning correctly
• Commonly replaced when water tastes bad, smells, or appears cloudy

• Replace with manufacturer-recommended filter and follow refrigerator-specific instructions
• Turn off the water supply and dispense water briefly to depressurize before removing the old filter
• After installation, flush several gallons of water per manufacturer guidance to clear air and loose carbon
• Dispose of the used filter according to local regulations; check for any refrigerator-specific priming steps

This blower assembly circulates air through the appliance to support proper airflow and heat distribution, restoring normal operation and efficiency when the original blower is damaged or failing. It replaces worn or broken blower components to reduce noise and improve performance. What it does:

• Spins the blower wheel to move air through the unit for proper heating, cooling, or venting
• Restores airflow when reduced air movement causes longer cycles or poor performance
• Reduces unusual noise from a wobbling or damaged blower wheel/housing
• Helps prevent overheating caused by restricted or ineffective air circulation

• Disconnect power (and gas if applicable) before starting any repair
• Access typically requires removing exterior panels or the front panel; use basic hand tools
• Inspect and clean surrounding airflow paths and vents of lint or debris while replacing the blower

This chimney is the exterior cover that finishes and protects the range hood's vertical duct area, restoring a clean, finished look and proper airflow path for vented hoods. It replaces damaged or missing hood chimneys. What it does

• Covers and conceals the hood's ductwork for a finished appearance
• Helps direct exhaust from the hood up into the household ducting
• Replaces bent, dented or missing chimney panels that expose ducts
• Restores proper fitment and alignment of the hood's upper section

• Disconnect power to the hood before servicing electrical or internal components
• May require two people to hold and align the chimney during installation
• Use original mounting hardware when possible; inspect screws/brackets and replace if damaged
• Check for proper sealing to the duct and adjust alignment for a snug fit