Frigidaire Room Air Conditioner Compressor & Sealed System

This evaporator coil assembly circulates refrigerant through the freezer refrigerant circuit to absorb heat and enable proper cooling. Replacing a worn or damaged evaporator restores efficient frost control and consistent freezer temperatures. What it does:

• Absorbs heat from the freezer compartment so refrigerant can carry it away and maintain cold temperatures.
• Helps prevent excessive frost buildup; a damaged coil can cause poor cooling or frost/ice accumulation.
• Works with the evaporator fan and defrost system; symptoms of failure include warm freezer, long run cycles, or visible ice on the coil.
• Integral to the sealed refrigeration system—any leaks or physical damage reduce cooling performance.

• One evaporator coil assembly

• Disconnect power before servicing; components have sharp edges—use gloves and eye protection.
• Replacement involves accessing the evaporator compartment and removing panels; follow OEM instructions for disassembly.
• Verify gasket/seal condition and replace any damaged insulation to ensure proper performance.

This condenser coil assembly removes heat from the refrigerator's refrigerant so the cooling system can operate efficiently. Replacing a damaged or corroded condenser helps restore proper cooling performance and system reliability. What it does:

• Dissipates heat from refrigerant as part of the refrigeration cycle
• Helps maintain proper compressor operating temperatures
• Commonly required when the coil is bent, punctured, corroded, or leaking
• Can reduce poor cooling or longer run-times caused by a faulty condenser

• One condenser coil assembly

• Disconnect power to the appliance before starting any service
• Handle the coil carefully to avoid bending fins or causing leaks
• Inspect connected lines and fittings for damage or oil residue indicating leaks

This replacement tube routes water inside the refrigerator to the ice maker or dispenser, restoring reliable water flow and preventing leaks. Use it when the existing tube is cracked, pinched, or blocked. What it does:

• Directs water from the inlet toward the ice maker or dispenser assembly
• Ensures a sealed path to prevent drips and internal leaks
• Helps maintain proper water delivery for ice production and dispensing
• A damaged or clogged tube can cause reduced water flow, leaking, or ice production issues

• Disconnect power and shut off the water supply before beginning work
• Inspect adjoining fittings and seals; replace any damaged clamps or gaskets
• Route the tube exactly as the original to avoid kinks or pinches

This condenser coil assembly releases heat from the refrigerant so the refrigerator can cool efficiently. Replaces a damaged or corroded condenser to restore normal cooling performance and help prevent compressor overwork. What it does:

• Dissipates heat from the refrigerant after compression to allow the refrigerant to condense back to liquid form
• Helps maintain proper operating temperature so the freezer and fresh-food sections stay cold
• Commonly associated with symptoms such as warm interior temperatures, excessive compressor run time, or visible coil damage/corrosion
• Works with the condenser fan and compressor as part of the refrigerator's cooling loop

• One condenser coil assembly

• Disconnect power to the appliance before beginning work to prevent shock or injury
• Access may require removing rear or bottom access panels; keep fasteners organized for reassembly
• Handle the coil carefully—bent fins reduce airflow and cooling efficiency; use a fin comb if needed