Parts for Frigidaire CFRE4120SW2: Fron Panel / Lint Filter Parts

This replacement outer refrigerator door restores the appliance's protective outer panel and appearance so your refrigerator keeps food covered and your kitchen looking finished. Fits original mounting locations for a like-for-like replacement. What it does:

• Replaces a dented, cracked, or cosmetically damaged outer door panel
• Restores proper enclosure of refrigerator compartments and helps maintain internal temperature
• Provides original mounting for door hardware, handles, and trim
• Helps stop drafts or visible gaps caused by a damaged door

• Disconnect power and remove food from the door before starting work.
• Door panels are bulky; have a second person on hand to avoid drops or damage.
• Keep original screws, hinges, and trim in case the unit requires reuse of mounting hardware.
• Follow OEM service manual or part diagram for proper alignment and reinstallation.

This replacement outer refrigerator door restores the appliance's protective outer panel and appearance so your refrigerator keeps food covered and your kitchen looking finished. Fits original mounting locations for a like-for-like replacement. What it does:

• Replaces a dented, cracked, or cosmetically damaged outer door panel
• Restores proper enclosure of refrigerator compartments and helps maintain internal temperature
• Provides original mounting for door hardware, handles, and trim
• Helps stop drafts or visible gaps caused by a damaged door

• Disconnect power and remove food from the door before starting work.
• Door panels are bulky; have a second person on hand to avoid drops or damage.
• Keep original screws, hinges, and trim in case the unit requires reuse of mounting hardware.
• Follow OEM service manual or part diagram for proper alignment and reinstallation.

This replacement outer refrigerator door restores the appliance's protective outer panel and appearance so your refrigerator keeps food covered and your kitchen looking finished. Fits original mounting locations for a like-for-like replacement. What it does:

• Replaces a dented, cracked, or cosmetically damaged outer door panel
• Restores proper enclosure of refrigerator compartments and helps maintain internal temperature
• Provides original mounting for door hardware, handles, and trim
• Helps stop drafts or visible gaps caused by a damaged door

• Disconnect power and remove food from the door before starting work.
• Door panels are bulky; have a second person on hand to avoid drops or damage.
• Keep original screws, hinges, and trim in case the unit requires reuse of mounting hardware.
• Follow OEM service manual or part diagram for proper alignment and reinstallation.

This push-button door switch detects when a refrigerator/freezer door opens or closes and controls the interior light and related circuits. It restores proper door-sensing function so lights and door-activated features operate correctly. What it does

• Senses door open/closed position and sends a signal to the cabinet light or control circuit.
• Turns the interior light on when the door opens and off when it closes.
• Common symptom: interior light stays on or stays off, or displays inconsistent door-activated behavior.
• Helps ensure door-controlled features respond only when the door is opened.

• One door push-button switch.

• Disconnect power to the appliance before inspecting or replacing the switch.
• Access usually requires removing the light housing or door trim; handle panels carefully to avoid breakage.
• Verify wire connections and orientation match the original switch before restoring power.

This replacement cover restores the exterior housing where the original cover is cracked, damaged, or missing, protecting internal components and improving the appliance's appearance. What it does

• Protects internal components from dust, moisture and impact
• Covers and secures underlying controls, wiring, or mechanisms
• Stops rattling or movement caused by a broken or loose cover
• Restores a finished, uniform exterior appearance

• Disconnect power to the appliance before beginning any work.
• Remove fasteners or retaining clips holding the damaged cover; keep hardware if reusing.
• Align the new cover and secure with the original screws or clips; do not overtighten.
• If sharp edges are present, wear gloves and work slowly to avoid damage.

This lint filter is the removable screen that traps lint and debris from dryer exhaust so air flows freely and loads dry more efficiently. Designed as a direct replacement for the factory lint-trap element. What it does

• Captures lint, fibers and small debris from the dryer drum exhaust to help prevent clogs.
• Restores proper airflow that can reduce long dry times and help the dryer operate more efficiently.
• Helps prevent lint buildup in the dryer vent and blower housing, lowering risk of overheating.
• Easy to remove and clean for routine maintenance and improved drying performance.

• One lint filter (screen) as shown.

• Disconnect power to the dryer before inspecting or replacing parts.
• Remove the old lint screen, clean the housing, then seat the new screen fully into the slot.
• Clean or replace the screen regularly; inspect the housing for obstructions.
• If you feel resistance or the screen doesn't seat properly, stop and check for foreign objects or damage.

This is a replacement refrigerator door gasket that restores a tight seal to help maintain proper cooling and reduce energy loss. It replaces a worn, cracked, or torn seal to improve temperature control. What it does:

• Seals the refrigerator door to keep cold air in and warm air out
• Helps prevent frost buildup and condensation inside the compartment
• Reduces compressor runtime caused by a failing seal
• Fits a single door opening and mounts around the door perimeter

• One refrigerator door gasket

• Disconnect power to the appliance before starting work
• Remove the old gasket and clean the door flange surface before installing the new seal
• Align the gasket evenly around the door and press into the channel; allow time for any form-fitting if needed
• If clips or fasteners are present, reinstall them; check the door for full closure after installation

The Sensor is an OEM part for Frigidaire dryers. It is responsible for detecting and measuring the humidity level inside the dryer drum, providing accurate readings and precise control over the drying process. 

A bad sensor can be caused by various factors, including wear and tear over time, electrical issues, or sensor malfunction. Signs of a faulty sensor include inaccurate moisture readings, extended drying times, or clothes that are still damp after a complete drying cycle.

Symptoms of a bad sensor include:

• Over or under drying of clothes
• Extended drying times
• Clothes remaining damp

Replace your malfunctioning or damaged sensor with this genuine OEM Frigidaire part to restore your dryer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This lint filter cover secures the dryer's lint screen in its housing to help contain lint and direct airflow for efficient drying. It replaces a cracked, loose, or missing cover to restore proper fit and screening. What it does:

• Holds the lint screen in place so lint collects in the trap instead of escaping into the cabinet.
• Helps maintain correct airflow through the lint trap area for consistent drying performance.
• Prevents lint buildup behind the trim that can hinder airflow or cause odors.
• Visible wear, cracks, or a loose fit are common signs this cover needs replacement.

• One lint filter cover (1 count)

• Disconnect power to the dryer before any service to avoid shock or injury.
• Remove the lint screen and clean lint from the housing before installing the new cover.
• Align the cover with the housing and snap or fasten in place without forcing; do not overtighten screws.
• If fasteners are stripped or the housing is damaged, replace those components to ensure a secure fit.