Parts for Ge 5TX62E9ST1WS: Front Panel Door Parts

Black plug button that covers unused control openings on your dryer control panel. Replace when cracked, broken, missing, or worn to restore a finished look.

Captures lint and debris during drying to prevent exhaust buildup and fire hazards. Replace when torn, ripped, or damaged. Confirm fit with your model.

Replaces the main exterior front panel on your dryer. Restores the visible surface when the original is cracked, dented, or discolored. White finish.

Fix a dryer duct trap that won't open smoothly or rattles with replacement trap slides. Restores proper vent access and eliminates binding issues.

Guides airflow and traps lint in your dryer. Replace if clogged, cracked, or broken to restore proper ventilation. Confirm fit with your model number.

Supports the front of the dryer drum for smooth rotation. Replace if drum wobbles, makes noise, or clothes have black marks. Verify fit with your model.

Dryer drum felt top bearing provides smooth drum rotation and reduces friction. Replace when you hear squeaking or grinding noises during operation.

Dryer bearing slides enable smooth drum rotation. Replace when hearing squeaking or rumbling sounds during cycles. Confirm fit with your model number.

The Dryer Bearing Slide (2-Pack) is an OEM replacement part for GE dryers. These slides are installed on the front panel of the dryer and support the drum as it rotates. They help reduce friction and wear, ensuring smooth and quiet operation during drying cycles. This pack includes two bearing slides, which are commonly used together in the dryer assembly.

Over time, bearing slides can wear down due to regular use, heat, and friction. When they become worn or damaged, the drum may no longer rotate smoothly, which can affect the dryer's performance and increase noise levels.

Symptoms of bad dryer bearing slides include:

• A loud squeaking or scraping noise during operation
• Difficulty rotating the drum manually
• Clothes taking longer to dry due to improper drum movement
• Visible wear or thinning on the existing slides

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Supports the front of the dryer drum as it rotates, reducing friction and noise. Replace if you hear squeaking or grinding sounds during operation.

This is a complete outer door assembly for a dryer, including the door panel, handle, and hinge components. It provides access to the dryer drum and seals the opening during operation to maintain proper heat and airflow. Replace this assembly if the door is cracked, the glass is broken, the hinges are damaged, or the door no longer latches securely and the dryer shuts off mid-cycle.

Seals the lint screen housing to prevent lint bypass into internal components. Replace if lint escapes or seal is worn. Confirm fit with your model.

Fix intermittent power issues or component failure in your dryer with this socket assembly connector. Restores secure electrical connections to appliance wiring.

Illuminates your dryer drum for better visibility when loading and unloading clothes. Replace when burned out or flickering. Verify fit with your model.

Door won't stay closed during cycle? This dryer door latch secures the door to the strike plate. Common repair requiring inner door panel removal.

Supports and pivots your dryer door for smooth opening and closing. Replace if door sags, misaligns, or won't seal properly. Verify fit with your model.

Fix a dryer that won't start, keeps running with door open, or stops mid-cycle. This door switch replacement is a common DIY repair taking 15-30 minutes.

A replacement shield switch that helps the oven/microwave detect door position so the unit runs only when the door is closed. Restores reliable door sensing and user safety by replacing a worn or damaged switch. What it does

• Acts as the door-position sensing switch to allow operation only when the door is properly closed
• Stops intermittent or failed start issues caused by a worn or faulty door switch
• Helps correct symptoms like oven/microwave not starting, stopping mid-cycle, or inconsistent door detection
• Works as the plug-in electrical switch used in the door/shield assembly

• Disconnect power at the breaker or unplug the appliance before starting any repair
• Access may require removing the door or control/vent panels
• Handle small metal parts and electrical connectors carefully; avoid bending terminals
• Test door operation and proper function after installation

This harness high-limit assembly connects the oven/dryer high-limit thermostat to the control system to help protect against overheating. It replaces a damaged or worn high-limit wiring harness to restore proper thermal cutoff signaling. What it does:

• Routes electrical connections between the high-limit thermostat/thermal cutoff and the appliance control
• Allows the high-limit device to open the circuit when temperatures exceed safe limits
• Common symptom: appliance fails to heat or repeatedly trips a thermal cutoff
• Common symptom: visible damaged/frayed wires or loose connector fit at the high-limit

• One high-limit harness assembly as shown

• Disconnect all power (unplug or shut off breaker) before starting service
• Use basic hand tools; ensure connectors are fully seated and insulated

Dryer door won't latch or stay closed? This strike plate mounts at the door opening to catch the latch securely. Easy DIY repair for reliable closing.

Fix a dryer door that won't stay closed or latch properly. This metal strike receiver restores secure door closure so your dryer operates safely.

Secures dryer panels, brackets, and internal assemblies. Replace missing, stripped, or damaged screws to restore proper alignment and prevent vibration.

Accessory rack that installs inside your dryer drum to safely dry shoes and delicate items. Replace if damaged, broken, or missing from your unit.