Parts for Ge GFWS3505L0BB: 03 - Front Panel & Door Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a replacement ST4-16 sheet-metal mounting screw used to secure panels and small components on compatible appliances. It restores proper fit and prevents loose or rattling parts for a secure repair. What it does:

• Fastens trim, access panels, brackets and small components to appliance chassis
• Replaces missing, stripped or damaged screws that cause loose panels or vibration
• Provides correct thread and length for original mounting locations (ST4-16 size)
• Helps maintain safe, gap-free panel alignment for normal operation

• Use the same screw size and thread type as the original; do not over-torque
• If thread engagement is poor, inspect mating hole for damage before reuse
• Wear safety glasses and disconnect power to the appliance before working on panels
• If multiple screws are missing or hardware is corroded, replace all like-for-like fasteners

This is a replacement self-tapping screw used to secure panels, brackets and small components on compatible appliances. It provides a direct-fit fastener for repairs where the original ST4 x 25 mm screw is missing or damaged. What it does

• Fastens trim, access panels, brackets and internal components that use an ST4 x 25 mm self-tapping fastener
• Restores proper fit and reduces rattles or loose parts caused by stripped or missing screws
• Matches the OEM thread and length for a secure hold in sheet metal and plastic mounting points
• Useful for routine appliance repairs and refurbishments

• Use the correct size screwdriver or bit to avoid stripping the head
• Start threads slowly and avoid over-torquing to prevent stripping or cracking mounting material
• Ensure the appliance is unplugged or power is disconnected before servicing
• Keep removed hardware organized to verify correct replacement locations

The Door Lock Assembly is an OEM replacement part for GE washing machines. It secures the washer door safely closed during operation. The assembly features a locking mechanism that withstands vigorous cycles while preventing small hands or objects from opening it inadvertently.

Causes of a bad door lock can include worn parts from repetitive use that become misaligned and fail to lock properly. Damage from forced opening can deform lock components.

Symptoms of a bad door lock assembly include:

• The door popping or creeping open during cycles
• Difficulty latching or hearing the door lock "click" closed
• Error codes related to an unsecured door

This OEM part is also compatible with Hotpoint, RCA, and select Kenmore models.

This front panel is the painted white exterior trim that restores the oven/range front for a clean, finished appearance and protects internal components from spills and heat. It helps maintain appliance cosmetics and proper airflow around controls. What it does

• Replaces damaged, dented, or discolored front trim to restore appearance
• Covers and protects switches, knobs, and internal components from splashes
• Helps maintain proper front airflow and fit of control/door assemblies
• Reduces gaps and rattles caused by bent or warped panels

• One painted white front panel

• Disconnect power before starting any repair to prevent shock or injury
• Minor disassembly of the cooktop/control bezel or door may be required for access
• Use care to align mounting tabs and fasteners to avoid stripping or bending
• Replace damaged screws or clips with OEM-style fasteners for secure fit

Small self-tapping screw used to secure appliance panels and internal components. Replaces worn or missing fasteners to restore proper fit and alignment for covers, brackets, and trim pieces. What it does

• Secures sheet-metal panels, brackets or trim to the appliance chassis
• Replaces stripped, corroded or missing screws that allow rattling or loose parts
• Helps restore proper panel alignment and prevents vibration noise
• Works where a self-tapping thread is required in thin metal or plastic mating parts

• Power off and unplug the appliance before servicing
• Use the correct screwdriver bit to avoid cam-out and head damage
• Start threads straight and drive carefully—do not overtighten to avoid stripping
• Replace like-for-like; match screw length and thread type to the original

This ST4 x 20 screw replaces a lost or damaged fastener and secures panels or brackets in your washer, restoring a tight fit and helping eliminate vibration and rattling caused by loose hardware.

• Fastens panels, brackets, or covers to the washer cabinet
• Replaces missing, stripped, or corroded screw specified as ST4 x 20
• Helps keep components aligned to reduce vibration and noise
• Useful during reassembly when the original screw won't hold

• Disconnect power before servicing; turn off the water supply.
• Match the screw length and thread to the original location; do not mix different screws.
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening.
• Transfer any original spacers or washers used with this screw.

The Washer Door Glass is an OEM part for GE washers. This glass serves as a protective barrier while allowing you to observe the washing process inside the machine. The door glass is designed to withstand the rigors of regular use and maintain transparency for a clear view of your laundry.

A bad door glass can occur due to accidental breakage or cracks over time. If you notice signs of damage, such as shattered or missing pieces, it may be time to replace the door glass.

Symptoms of a bad door glass include:

• Shattered or broken glass
• Visible cracks or chips
• Inability to see through the glass

Restore the function of your GE washer by replacing the damaged door glass with this genuine part. This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This M5-16 metric machine screw secures service panels and internal components in compatible appliances, providing reliable fastening for repair and replacement. Use the correct screw to restore fit and function after disassembly or part replacement. What it does

• Fastens panels, brackets, and components where an M5 x 16 mm machine screw is specified
• Restores secure attachment after repair or replacement of parts
• Helps eliminate rattles, loose panels, or misaligned parts when the correct screw is used
• Small, corrosion-resistant finish (typical for appliance screws) for lasting hold

• One M5-16 machine screw

• Use the correct sized M5 driver or hex bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent thread or component damage
• Disconnect power and follow appliance safety procedures before accessing internal parts
• If the original screw had washers or clips, reuse them or replace with equivalent hardware

This is a ST4.2 x 9.5 mm self-tapping screw used to secure panels and components in appliances. It replaces missing or stripped fasteners to restore proper fit and function of covers, brackets, and trim. What it does:

• Secures control panels, trim pieces, brackets or small components
• Replaces missing or damaged fasteners that cause loose or rattling parts
• Provides a durable threaded hold in sheet metal or plastic mounting points
• Helps restore proper alignment and prevent vibration-related noise

• One ST4.2 x 9.5 mm self-tapping screw

• Unplug the appliance power before beginning any repair
• Use the correct screwdriver bit to avoid stripping the screw head
• Apply firm, steady pressure and do not overtighten to prevent thread or material damage
• If original mounting hole is damaged, inspect and repair the hole before installing

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This pump access shroud is the replacement housing that protects and encloses the washer pump area, helping keep pump components aligned and shielding them from debris. It restores proper coverage around the drain pump assembly. What it does:

• Provides a protective enclosure for the washer drain pump and related fittings
• Helps prevent debris from contacting the pump and impeller
• Restores correct fit and alignment of pump components after damage or wear
• Can reduce gap-related leaks and rattling caused by a cracked or broken shroud

• Disconnect power and shut off water before beginning work
• Drain any remaining water from the tub or hoses to avoid spills
• Access typically requires removing the washer cabinet or front panel; follow your model's service manual
• Handle plastic components carefully to avoid cracking; replace damaged fasteners as needed

This ST4 x 10 self-tapping screw secures lightweight appliance panels and components, providing a reliable fastener for repairs and maintenance. It's a direct-fit hardware piece commonly used on control panels, trim and internal bracketry. What it does:

• Fastens plastic or thin metal panels and small internal parts without a nut
• Holds control housings, trim pieces, and access panels in place
• Helps stop rattles and loose panels when the correct fastener is installed
• Common replacement when original screws are stripped, missing, or corroded

• Use the correct ST4 screwdriver or compatible bit to avoid stripping the head
• Start threading by hand to ensure alignment before driving with a driver
• Tighten until snug; avoid over-torquing which can crack plastic parts
• Disconnect power and follow appliance safety instructions before servicing

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.