Parts for Ge GFWS3505L0BB: 02 - Cabinet & Top Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replacement mounting screw for washer pedestals. Secures pedestal to washer base. Order if original screw is stripped, missing, or damaged.

Secures multiple small pipes to reduce vibration and prevent chafing. Replace if cracked, loose, or causing rattling. Confirm fit with your model.

EMI filter installs where power cord enters washer to reduce electrical noise on incoming power line. Replace if cracked, damaged, or causing interference.

Replace your washer's top panel assembly if cracked, damaged, or worn. This structural cover panel installs on the top of the washing machine cabinet.

Note: Due to design change, new part may look different but is still a functional replacement.

Supports and stabilizes the washer tub during operation. Replace if spring is broken, stretched, or weak to restore proper tub balance and prevent damage.

This spring hanger secures a suspension spring to the washer's cabinet/frame, supporting the tub assembly and helping control vibration. Replace a cracked or broken hanger to restore stable spin performance and reduce banging or shaking.

• Provides the mounting point for a suspension spring that helps carry the tub's weight
• Helps keep the basket balanced and limits vibration during spin
• Failure symptoms can include excessive shaking, loud banging, out-of-balance stops, or a sagging/leaning tub
• Visible cracks, deformation, or broken mounting tabs indicate the hanger should be replaced

• Disconnect power and water supply; access the hanger location per your model's service procedure
• Support the tub and control spring tension with locking pliers; wear gloves and eye protection
• Move the suspension spring to the new hanger and secure it in the same orientation
• Reassemble, level the washer, and run a test spin to verify smooth operation

This top panel pin secures the range's upper/top panel to the appliance frame so the panel stays aligned and stable for safe, reliable use. It's a simple replacement part that restores proper panel fit and reduces rattling. What it does:

• Locks the top/upper panel into position to keep it from shifting or sagging
• Helps eliminate panel movement, noise, and misalignment during use
• Restores a secure fit if the original pin is broken, bent, or missing
• Works as a direct-fit replacement where this OEM pin is specified

• One top panel pin

• Disconnect power to the appliance before any service to avoid shock or injury
• Access may require removing the cooktop or backguard
• Inspect surrounding clips, hinges, and mounting points and replace if damaged

This is a self-tapping appliance screw used to fasten panels and small components. It replaces missing or damaged screws to restore secure fit and reduce rattling or loose parts. What it does:

• Secures trim, panels, brackets or components where a small self-tapping fastener is required
• Restores a tight fit to stop vibration, rattling or misalignment
• Replaces stripped, corroded or lost screws that prevent proper assembly
• Compatible with common appliance sheet-metal and plastic thread-in points

• Use the proper screwdriver or driver bit to avoid stripping the head
• Start threads straight and apply firm, controlled pressure when driving into thin metal or plastic
• Replace with the exact size and type to ensure correct fit and function
• Disconnect power and follow appliance-specific safety instructions before servicing

This front panel pin secures a range or appliance control/front panel to the cabinet, keeping the panel aligned and stable for safe operation. It's a small but important fastener that prevents panel sag and rattles. What it does:

• Secures the front/control panel to the appliance cabinet so the panel stays in place
• Keeps panel edges aligned for a clean fit and proper button/knob operation
• Prevents vibration noise or rattling caused by a loose or broken pin
• A worn or broken pin can allow the panel to move, feel loose, or misalign

• One front panel pin

• Disconnect power to the appliance before beginning any repair
• Typically accessed by removing the console or front panel screws; retain screws and small parts
• Replace the pin carefully to avoid damaging the panel or surrounding trim

Secures your washer's front service panel to prevent vibration and sagging. Replace if panel is loose or misaligned. Confirm fit with your model number.

This genuine replacement screw secures panels and components on compatible appliances to restore proper fit and reduce vibration or rattling. Use when missing, stripped, or loose fasteners prevent parts from staying in place. What it does

• Fastens trim, panels, or mounting brackets to maintain component alignment
• Restores secure attachment when original screws are missing or damaged
• Helps eliminate noise and vibration caused by loose parts
• Matches the OEM thread profile and length for proper fit

• Use the correct screwdriver or bit to avoid cam-out and damaged heads
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep spare screws and small parts away from children and pets
• If threads are damaged, replace mating fastener or insert rather than forcing this screw

Washer won't drain or spin? A broken drain pump is often the cause. This part removes wastewater during the drain cycle. Takes about 20 minutes to replace.

This screw with attached washer secures internal components in your washer. Replace if screw is stripped, missing, or washer is damaged or worn out.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This small metal pin connects and secures the suspension damper that reduces vibration and movement in your washing machine during the spin cycle. It allows the damper to pivot and absorb shock while keeping the wash basket stable. Replace it if your washer vibrates excessively, makes loud banging noises during spin, or moves around during operation.

Corner bracket for washer structural support. Mounts in frame corner to secure components. Replace if cracked, bent, or broken during installation.

Replacement leveling leg assembly for front-load washers. Installs at the base corner to support and stabilize the washer. Needed when cracked or broken.

Self-tapping screw for securing washer components and panels. Replace worn, stripped, or missing screws during repairs or reassembly of your machine.

A small replacement cover that fits over the cabinet shipping screw area to protect the screw and improve the refrigerator's appearance. Installs quickly and restores the factory look where a shipping screw cap is missing. What it does

• Covers and protects the cabinet shipping screw or mounting hole from dirt and snagging
• Restores finished appearance to the appliance exterior where the cap was lost or damaged
• Helps keep the screw area clear of debris that can cause cosmetic or access issues
• Simple snap-in design keeps the cover secured in normal use

• Designed for a snap-in fit over the cabinet shipping screw; no special tools usually required
• Work on a cool, powered-off appliance and follow the manufacturer's safety guidance
• If the fit is tight, use a flat plastic tool or gloved fingers to press the cover into place to avoid scratching
• Only replace with the exact part specified for your appliance location

This is an exterior drain hose catch or retainer that secures the outside portion of the washing machine drain hose. It holds the hose firmly in position to prevent it from disconnecting during the drain cycle. Replace this part if the outer drain hose slips free, causes water leaks on the floor, or if the original catch is cracked or broken.

Replaces the damaged, cracked, or missing rear panel on your washer cabinet. Encloses internal wiring and components while restoring a finished look.

This is an internal drain hose catch that secures the drain hose in place inside the washing machine. It prevents the hose from slipping out of position, ensuring proper water drainage during the wash and spin cycles. Replace this part if the drain hose keeps coming loose, water is not draining properly, or you notice leaks around the drain connection inside the machine.

Replacement power cord for your washer. Installs at the rear panel to restore electrical connection. Needed when original cord is damaged, frayed, or missing.

Routes wastewater from your washer's drain pump to household plumbing. Replace this external drain hose if cracked, kinked, leaking, or damaged.

Spring-style clamp secures drain hose to pump or fittings, preventing leaks and separation. Replace if loose, corroded, or causing water leaks. Verify fit with your washer model number.

Connects two sections of your washer's drain hose for secure, leak-resistant water discharge. Replace if cracked, loose, or leaking to restore proper fit.

Mounting screw for washer and pedestal installation. Replaces lost, stripped, or damaged screws. Secures components during assembly and repair.

Self-tapping screw for washer control panels, trim, and internal brackets. Replaces missing, stripped, or damaged screws during repairs and maintenance.

Fix slow draining or leaks at the filter access. This washer drain pump filter traps lint and debris before they reach the pump. Easy DIY replacement.

This U-shaped mounting bracket secures and guides the drain hose at the back of the washing machine, keeping it properly positioned during the drain cycle. It prevents the hose from slipping out of the standpipe or laundry tub. Replace this bracket if the drain hose keeps falling out of position, water is spilling during the drain cycle, or the original bracket is cracked or broken.

A small sheet-metal screw used to secure panels and components on compatible GE appliances. Replaces worn or missing fasteners to restore proper fit and stop loose or rattling parts. What it does

• Secures appliance panels, brackets or trim to the cabinet or frame
• Keeps components aligned so doors, panels and controls operate correctly
• Common symptom: loose or rattling panels or trim
• Common symptom: parts that shift or detach during use

• One screw

• Use the correct sized Phillips screwdriver; start threading by hand to avoid cross-threading
• Tighten until snug — avoid over-torquing which can strip threads or crack panels
• Replace only with the same size and thread type for secure fit
• Disconnect power where applicable and follow appliance safety guidance before servicing

M5 x 12 machine screw secures panels, brackets, and internal components in your washer. Replace missing, stripped, or loose screws to restore proper fit.

This ground wire restores the appliance's chassis grounding connection so metal parts are properly bonded to earth ground for safer operation and correct electrical performance. What it does:

• Provides the chassis-to-ground connection that completes the appliance's safety grounding path
• Helps stop stray voltage on metal panels and reduces risk from loose or missing ground connections
• Common service item when a wire is frayed, detached, or shows burned/corroded terminals
• Replaced when continuity checks fail or grounding screws/terminals are damaged

• Disconnect all power (unplug or switch off breaker) before accessing wiring
• Verify grounding continuity with a multimeter after installation
• Use correct fasteners and secure both ends under their original terminals; avoid over-tightening

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.