Parts for Mtd 5X70MU: Fuel 880-010518 Parts

This replacement part is a carburetor assembly. Carburetor assemblies typically work with the engine to ensure that the machine is able to start and run effectively. This part is able to mix the air and fuel so that the engine is able to power on. A new carburetor assembly might be needed if the current one is no longer working. If the engine is unable to start up, it could be from a malfunctioning carburetor. It is not uncommon that these parts will need to be replaced with extended use over time.This is a genuine replacement part made by MTD. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

This is a genuine OEM replacement fuel bowl bolt for a snowblower, tiller, or chipper engine. The fuel bowl is a part of the fuel filtration system designed to prevent sediment from clogging up the carburetor. Fuel moves from the fuel tank and passes through the fuel bowl to catch any debris. It is essentially a particle filter. This bolt mounts the fuel bowl in place. The two most likely reasons why a fuel bowl bolt might need replacing are general wear and tear or loss. This bolt is located fairly close to the outside of the engine, making it more susceptible to the elements. Over time, the bolt may corrode and will need replacing. If lost while making a repair to the fuel bowl itself, the fuel bowl bolt will need to be replaced. Use a wrench to make the repair. This fuel bowl bolt is a top of the line replacement part for Bolens, Yard Machines, MTD, Troy-Bilt, Huskee, and Yard Man appliances. This part does not include any additional hardware, as it ships individually.

This is a genuine carburetor insulator gasket that is designed to fit select models of lawn mowers. The carburetor insulator gasket is responsible for insulating the carburetor to create a strong seal between it and the engine block and insulate it from the excess heat. This gasket is subject to constant pressure and extreme heat, which can cause it to compress, warp, or become otherwise damaged as a result of regular use. Gaskets should be on the routine maintenance schedule and should be inspected every time other repairs are performed. Without functional gaskets, the engine may run poorly or may not run at all. This genuine OEM carburetor gasket is manufactured by MTD. It can be used in select machines from this brand, as well as those from Troy-Bilt, Cub Cadet, HUSKEE, Yard Man, and Yard Machines. There are hundreds of compatible units that take this gasket. The gasket is made of durable composite materials and sold as an individual unit. Hardware and additional components will require another purchase. Be sure to allow the engine to cool and use the appropriate tools for proper installation without damaging the gasket. Always drain the fuel system before working on the carburetor or internal engine components.

Fuel filters are created to strain out gas before it reaches the carburetor in lawnmowers and other gardening tools. Located in the fuel line or the fuel tank, it prevents unwanted debris from reaching the carburetor, which can cause engine damage. If the fuel filter is damaged or becomes clogged with material, it no longer offers the same protection to the carburetor. This can lead to difficulty starting the lawnmower and decreased performance. Correcting this issue early can prevent damage that might require a new lawnmower. Maintenance of the lawnmower by adding fuel stabilizer, changing the oil, and replacing the air filter will increase the life of lawn care equioment. Even if no issues are present, the fuel filter should be replaced after about 200 hours of use. Disconnecting the spark plug should be done prior to installing a new fuel filter. This fuel filter is a genuine OEM component directly from the manufacturer and comes as an individual part. It can be used with various Craftsman, Cub Cadet, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and Mastercut lawnmowers, tillers, blowers, and wood chippers.

This fuel tank upper grommet can be used to easily replace one that has worn out or deteriorated, allowing equipment to run smoothly for longer.Fuel tank grommets are required to ensure fuel does not leak from the area between the fuel filter and the fuel tank. Throughout their life, grommets will experience wear and tear which can easily cause them to weaken. To prevent fuel loss, replace the grommet when it begins to show signs of deterioration. These grommets can easily be replaced at home.This fuel tank upper grommet is an OEM replacement part that has been sourced directly from the manufacturer. This replacement fuel tank grommet is compatible with various different models of MTD, Cub Cadet, Craftsman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers and log splitters. Please note this fuel tank grommet is sold individually.

This part is an air filter base gasket. The air filter base gasket helps seal the filter that the air runs through before going to the engine. This helps prevent dirt or other debris from entering the engine, which can cause extensive damage. A new air filter base gasket may be needed if upon visual inspection it is damaged in any way. If the gasket is not forming a seal as it is supposed to, there may be engine problems such as misfiring, stalling, or not starting at all. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This air filter base gasket is compatible with engines, lawnmowers, log splitters, and trimmers that are manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This choke temperature control gasket is an authentic OEM replacement part sourced directly from the manufacturer for use small engines that utilize a choke. The temperature control gasket helps to create a seal inside the choke that prevents air from seeping in or out of the choke. If the gasket is worn or damaged, air and contaminants could infiltrate the choke and cause the choke to fail. The choke temperature control gasket should be inspected and replaced if it is damaged. The choke uses a mixture of fuel and air to start the engine combustion process. If the choke temperature control gasket is not fully functioning, too much air could get in, and the ratio would not be optimal for the ignition process. If the engine is rough starting or starts and dies quickly, the choke's gaskets should be inspected and replaced as needed. Wear gloves when working on the choke and ensure that the spark plug is removed to prevent accidents.This choke temperature control gasket is sold as an individual part. It is designed for use in small engines that utilize a choke manufactured by MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt.

This part is a carburetor stud. A carburetor mixes fuel and air before delivering it to the engine. The carburetor stud, often called carb stud, is used to ensure a tight seal between the carburetor and the intake manifold. It is important that air and other dirt or debris do not enter the engine, and so this seal between the carburetor and the intake manifold is very important.A carburetor stud may need to be replaced if it is stripped or worn. Of course, a new carburetor stud will be needed if it is missing. If the carburetor and the intake manifold do not have a tight seal, it could be possible that new carburetor studs are needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific carburetor stud is compatible with engines, lawnmowers, and log splitters manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This part is a replacement air filter. This part's intended use is to replace a broken or worn air filter in small engine outdoor power equipment.The air filter ensures that no dirt, debris, or contaminants are able to enter the engine and cause functionality problems. Air filters should be cleaned regularly and replaced with a genuine OEM part at the point where cleaning is no longer sufficient. It's important when working on or near to an engine to make sure the equipment is powered off and completely cooled down before starting any repairs.This is an authentic MTD OEM replacement part made of high-quality materials. This air filter can be used with different models of lawn tractors that have been manufactured by MTD, Craftsman, Troy-Bilt, and some other brands. It is sold individually.

This replacement part is a fuel cap intended for use with lawn mowers. This cap seals the fuel tank to ensure there are no leaks and that fuel is not contaminated.If the fuel tank is leaking during use, the cap may be damaged. If the cap has been bent or cracked, or if the cap's threading has stripped, this part should be replaced as soon as possible.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

This flange bolt is a genuine MTD part, sold individually. This flange bolt can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, string trimmers, leaf blowers, edgers, log splitters, wood chippers, and tillers. The purpose of a flange bolt is to serve as a fastening component, in conjunction with a nut, so components can be secured and affixed to one another over time.The flange bolt might have to be replaced at some point within the standard lifespan of the appliance if it is lost, misplaced, or damaged. The flange bolt can be gradually stripped over time, in which case it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This flange bolt is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Cub Cadet, Craftsman, Yard-Man, Yard Machines, MasterCut, and Huskee.