Parts for Mantis 7222: Fuel Tank Parts

This fuel tank is designed to hold the fuel and feed it into the engine during operation, which is what powers the equipment. This tank is made of durable ABS plastic and screws to the housing for a secure hold. The fuel tank can become damaged by debris flying and impact incidents. The screw housings can also wear down over time and may break, making it difficult to secure the tank. Sometimes, a replacement like this OEM fuel tank is the solution. This OEM replacement part is manufactured by Echo and is made to exact standards to fit compatible models. The fuel tank can be used with select tillers, edges, and other equipment from Echo, Mantis, and Little Wonder. This unit is sold individually and is the tank only. The cap, fuel lines, and screws to hold the tank in place are all sold separately. A screwdriver is needed to replace this part and the fuel should always be drained before beginning the repair.

This collar makes up part of the fuel assembly inside various types of lawn and garden equipment. The part is made of durable metal and attaches directly to the fuel tank. The collar ensures the fuel tank is protected from damage from the tool's metal screws. It also works to secure the fuel tank so the engine will power on. The collar can become damaged or worn through use and may need to be replaced.If the collar is broken, it will no longer provide protection for the fuel tank. It can also remove the tank's secure attachment to the rest of the equipment. When replacing this part, an Allen wrench or a screwdriver may be needed. Unscrew the fasteners that hold the collar onto the fuel tank to remove it from the tool. Reattach the new collar to the equipment's fuel tank.This collar is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual unit. The collar is designed to be compatible with tillers, string trimmers, leaf blowers, edgers, hedge trimmers, and pole pruners manufactured by Echo, Shindaiwa, and Mantis.

This 5 x 15 screw is used in various places on 68 different models of small gasoline powered lawn tools manufactured by Shindaiwa, Little Wonder, and Echo. These devices include hedge trimmers, cultivators, edgers, and grass trimmers. Round headed screws such as this are the workhorse of landscaping tools. While these screws seldom wear or fail in typical use, it is often the case that small hardware pieces such as these are lost or stripped when the gasoline engines are being repaired or undergoing maintenance. Bear in mind when ordering one of the screws that they are sold individually. It is wise to purchase more than one replacement screw at a time. Frequently, different parts of the lawn equipment are secured to the engine housing with these round head screws. For instance, many Shindaiwa models use this piece to fasten the gas tank to the engine housing. Covers, plates, and support brackets also rely on screws such as these. Users may find it tempting, because of the common appearance of this screw, to substitute a regular machined screw. It's important to remember that OEM parts, such as this screw, are manufactured according to the exact specifications of the original part and will fit these yard tools perfectly.

This fuel tank grommet creates a tight seal where the fuel line enters and exits the fuel tank. It is also commonly known as a fuel tank bumper, fuel line grommet, or rubber grommet. This particular grommet has three holes and is made of black rubber. The fuel line, the vent tube, and the fuel return line are inserted through the three holes. While the fuel tank grommet is made from durable rubber, it can get worn out over time and cause fuel to leak from the tank. At this point, it's time to replace the grommet, and it's advisable to change the fuel lines at the same time. It's a straightforward procedure that will take 15 to 30 minutes to complete. This part works with more than 150 tools and equipment. In particular, it works with outdoor power tools like the chipper, edger, grass trimmer, hedge trimmer, string trimmer, leaf blower, pole pruner, tiller, and water pump. It is compatible with brands like Echo, Little Wonder, Mantis, and Shindaiwa. This replacement part is sold individually and is supplied directly from the original equipment manufacturer.

This clip attaches the fuel line to the engine’s carburetor. This clip is important as it keeps your outdoor tool’s fuel line attached to the fuel filter. If this connection comes loose, fuel will not be filtered properly and might not reach the rest of the engine. Clips are prone to becoming brittle over time and can easily snap due to their small size and location against the vibrating engine. While a faulty fuel line clip might not be the most obvious of problems, it’s an easy fix that only requires a metal hook. Fish out the fuel line from the empty fuel tank and take off the filter. Remove the faulty clip and replace it with the new one. This item is a genuine OEM product shipped straight from the original manufacturer and is compatible with Echo, Mantis, and Shindaiwa appliances. It can be used with chainsaws, hedge trimmers, edgers, pole pruners, tillers, and string tillers, and even leaf blowers.

This felt fuel filter 125-527-1 is used to clean fuel before it reaches the carburetor. If clogged, this can restrict the flow of fuel to the carburetor, causing the engine not to start. Fits 3/16 inch ID fuel line and engines up to 30cc. This part is commonly used with blowers, chainsaws, edgers, shredders, and trimmers. Not compatible with greater than 10% ethanol fuel.

Connected to the fuel vent tube, this fuel tank vent is necessary for proper fuel flow. Without this part, gas might leak out and cause damage. The vent allows air into the tank but will keep gas from coming out. This part enables the tank to breathe and helps relieve vacuum and pressure. It might be a challenge to identify if the fuel tank vent is damaged. Finding an air leak isn't easy, but a machine that demands more fuel may signal such a case. The installation of this part must be done in a well-ventilated area. Do not begin the repair without draining the existing fuel from the tank and disconnecting the spark plug wire. This fuel tank vent is a genuine OEM product sourced directly from the manufacturer and comes as an individual part. It can be used on many lawn maintenance items, including chainsaws, hedge trimmers, power blowers, power pruners, and edgers. It is compatible with models from Echo, Mantis, and Shindaiwa.

The pipe clip is used to secure the vent pipe to the fuel tank vent, so the machine can be vented properly. It might need to be replaced because the current pipe clip has been lost. The clip could also become corroded or damaged and need to be replaced. Without a clip in good condition, it will not be possible to properly secure the vent pipe. The replacement of the metal pipe clip is simple. This is a genuine OEM replacement part and it is sold individually. The pipe clip can be used with a range of handheld lawn and garden machines including tillers, string trimmers, hedge trimmers, edgers, and chainsaws. Compatible brands include Echo, Mantis, and Little Wonder. Owners should always consult their manual to make sure they are buying the correct pipe clip and other replacement parts for their machines.

A fuel pipe or fuel line moves gas from the tank to the engine. It is constructed from a durable yet flexible synthetic rubber material. It measures 3 x 5 x 70 mm and is made from a sturdy rubber material. You can use this fuel line with different machines like pole pruners, leaf blowers and tillers, and hedge trimmers. Over time, a fuel line can become brittle due to exposure to heat and gas, cracking and potentially causing fuel leaks. When operating a machine with a leaking fuel line, it can lead to more fuel consumption and even possible mechanical failure. This is why a fuel line in poor condition should be immediately replaced. To install this replacement fuel line, the spark plug should be removed. Empty the fuel tank before installing to prevent accidental spills. The V471001200 Fuel Pipe OEM Replacement is a genuine fuel pipe replacement made by Echo. This OEM fuel line is sold individually. If a genuine Echo Fuel Line Grommet is needed, it will need to be purchased separately.

This fuel pipe is one of two that regulates the flow of gasoline from the fuel assembly to the engine and dispenses overflow back to the tank.It comes into operation when pressing the fuel bulb overfills the carburetor. The return fuel pipe automatically returns the excess to the fuel tank. Over time the original pipe may deteriorate and have to be replaced. For machines that have some substantial use, it’s probably a good idea to replace the fuel assembly, the two fuel lines, and the fuel filter along with the fuel pipe. This genuine OEM manufactured part replaces the original fuel return line. The pipe is used with hedge trimmers, edgers, lawn trimmers, and cultivators. It's sold separately from the gasoline supply line. It can be used with Little Wonder, Mantis, and Echo gasoline engines. This fuel pipe is sold individually.

Designed for use with garden tillers, this fuel cap assembly is an essential part of a tool's fuel system. It is responsible for ensuring that the fuel stays in its place in the fuel tank. It helps prevent any leakage of gasoline from the tiller. Through time and use, the fuel cap can become damaged or lost. If the fuel cap is cracked or broken through impact or wear and tear, it will need to be replaced.The process of replacing the fuel cap assembly is quick and easy. There is no need to use tools, although work gloves will be useful. Before making the replacement, the tiller should be placed on a flat surface. Remove the spark plug wire for safety purposes. Take the cap on the tiller and unscrew it so the new cap can be screwed on. After the replacement is made, reconnect the spark plug wire and ensure fuel is in the tank before using the tiller.This fuel cap assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The cap is designed for use with tillers manufactured by Echo and Mantis.

This is a genuine fuel cap gasket replacement designed for use in certain lawn and garden equipment engines. The fuel cap gasket is threaded onto the tank with the fuel cap, creating an airtight seal and ensuring that gasoline doesn't leak out while the machine is in use. This gasket can become corroded from the chemicals over time or simply become worn and ineffective at sealing as the rubber wears out. In some cases, the gasket is lost. A replacement with an OEM part like this will be required. This replacement fuel cap is manufactured to exact OEM standards by Echo and can be used for select models of hedge trimmers, blowers, edgers, and grass trimmers made by Echo, Little Wonder, and Shindaiwa. This gasket is sold as an individual unit and does not include any additional hardware or parts. This durable rubber gasket is easy to replace. Simply take off the fuel cap and remove the old gasket, if still present. Then, put the new gasket on the fuel tank or in the cap (depending on the requirement of the model being repaired) and replace the fuel cap. Be sure to allow the unit to cool and wear gloves when performing repairs.

It is very easy to set aside the cap to a fuel tank. Many do so at traditional gas stations, which is why so many manufacturers create gas cap connectors or capless systems. When it is yard and garden machines, it is necessary for the makers to create connectors that keep the cap of a fuel tank connected to the tank itself. Often, machines cannot run if the cap is cracked or missing. This replacement fuel tank cap connector will work with a long list of home and garden machines from Echo, LIttle Wonder, and Shindaiwa. It is made of plastic and designed to last. This is an OEM replacement part that requires no tools for installation. It ships individually and is a very easy repair.