James G Fort George G Meade , MD April 08, 2022 Appliance: General Electric Washer GTW330ASK3WW Broken washer belt and speed sensor I found a YouTube video, order the parts about midnight Saturday and-they came in the mail before lunch on Tuesday. I laid the washer on the rear panel, removed both pulleys to clean them, installed the speed sensor. bolted the pulleys back in place, installed the new belt-making sure it was centered and everything moved freely, and attached the belt/pulleys cover. I set the washer back up, reattached the water lines, placed the drain tube, and plugged in back in. Works like new !!! 30 minutes later, we are doing laundry again !!! Read More... 6 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Socket Set
Clayton B Calhoun , LA October 13, 2023 The washer would not spin. Replaced thr motor pulley and transmission pulliey and belt. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Socket Set
Paul M Lutts , TN March 07, 2024 Appliance: Model GTW465ASN1WW On a 7 year old GE washer was getting more out of balance over time. Researched the causes of the machine being out of balance, called AppliancePartsPros.com and talked to a customer service rep who concured with my findings that the Suspension Rods were failing and were the probable cause. Ordered all four replacement rods and a main drive belt as the one in the machine was well worn, the belt housing cover was covered in rubber shavings. Replaced all these after delivery of the parts which arrived approx four days from the order date and the machine is back to normal. Excellent service and will order again from this company. Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: 30-60 minutes Tools: Adjustable Wrench, Nut Drivers, Screwdrivers, Socket Set
Robert B Vicksburg , MS December 20, 2025 Appliance: General Electric Washer GTW465ASN1WW Clothes still wet after spin cycle New water pump and new drive belt Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Nut Drivers
Everett M Manistee , MI July 19, 2026 Wouldn’t spin water and the speed sensor was broke by the belt when it broke I tipped the washer on its side and removed the plastic guard that covered the two pulleys. Removed both belt and sensor. Replaced with new ones. Placed was washer upright and attached all hoses and plug in the electrical cord. I then placed a medium load of clothes in and ran the washer to make sure it worked. Which I did Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Nut Drivers, Pliers, Socket Set