James H Clarksville , IN November 18, 2019 Used no hanger Got the right part the first time and at my door in 2 days. Thank you for the great service. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Screwdrivers
Steve S Schertz , TX February 27, 2023 Appliance: General Electric Microwave Hood Combo JVM6175SF1SS Microwave improperly mounted above range. Purchased a home built in 2015. The wall cabinets were terraced out from the wall with the center one being out the furthest. Microwave was mounted too far back so that the vent grill was under the cabinet causing discoloration to the door. Additionally, the vent hole in the cabinet was off center so the exhaust fan flap couldn't open. Removed cabinet and found one of the self centering mounting bolts to be stripped out and the plastic vent grille broke. Cut the proper size opening for the exhaust vent and remounted with the new hardware assembly kit using a Philips screwdriver. The vent grille is back ordered, but since the microwave is now properly mounted I have access to the screws to install once I receive it. Read More... Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Gary J Narragansett , RI December 03, 2022 Appliance: General Electric Microwave Hood Combo JVM7195SF1SS On the left side assembly holder nut and the 3 7/8' bolt were stripped. Removed the dozen or so screws on the microwave cabinet housing (top & 2 sides). Removed the 2 screws from the assembly holder hut bracket and replaced the assembly holder nut with a new one and re-installed the 2 screws. Re-installed the dozen or so screws on the cabinet. Finally re-installed the microwave with the 2 new 3-7/8'" long bolts thru the kitchen cabinet. Read More... Do-It-Yourself Rating: Repair Time Estimate: 15-30 minutes Tools: Pliers, Screwdrivers