Ge WB06X10128 Microwave Door Latch Lever Bracket OEM Part

I ordered the door switches, switch monitor and the lever switch. i replaced all of the parts and the oven started to function only to have it fail again after 2-3 operations. I eventually determined that the main fuse holder was not completely securing the fuse. i believe the combination of new switches and realigning the fuse clip solved the problem.

Ordered new switches (replaced all three- upper and lower door switches and switch monitor- just to make everything new). Received them within 48 hours! You tube video enabled replacement job to be completed by handyman neighbor in 20 minutes (would have been shorter repair time but for my kibitzing). Appliance Parts Pros gets an A+! Will do business with APP on any future appliance repairs!

Replaced bottom door switch,

I had to use a Phillips 2 screwdriver and a small Torx driver to remove the control panel box and then the door switch frame. I changed out the primary & secondary switches. I had to learn how to get the old switches out by pressing a little plastic tab in the rear of each switch in the plastic frame. Primary can only go in the top and the secondary can only go in the middle, otherwise the wiring harness won’t fit. I clicked the new switches into place, plugged them into the harness, screwed everything back together and tried the microwave with a cup of water and the unit ran properly! When I took off the top grill above the door, one screw support post broke off. I glued it with Super/Krazy glue.

I replaced the door switch. I did order the Switch-Monitor. But I did not use them as they did not help to resolve the issue. Only the Door Switch resolved the problem.