General Electric Trash Compactor Parts

The Drawer Roller Asm is an OEM component specifically designed for GE Waste Compactors. This Drawer Roller Asm is responsible for safely guiding the compactor drawer in and out. By assisting the smooth opening and closing of the drawer, it helps reduce strain on the entire compactor system.

Causes of bad rollers can include excessive use over time, improper loading that puts undue stress on the rollers, or damage from impact or pinching. 

Symptoms of bad rollers include: 

• Difficulty opening or closing the compactor drawer 
• Excessive noise or grinding sounds when moving the drawer
• The drawer not sliding freely and securely on its rollers

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore trash compactor models.

This drawer wheel assembly replaces a worn or broken roller that supports a sliding drawer inside your appliance. It restores smooth, aligned movement so the drawer rolls in and out easily without binding, wobbling, or dragging.

• Supports the drawer's load and guides it along its track
• Helps maintain alignment to prevent binding or coming off-track
• Restores smooth, quieter roll-in/roll-out operation
• Common symptoms: stiff opening/closing, wobble or uneven glide, scraping noise, cracked or missing wheel

• Disconnect power to the appliance; also shut off water.
• Remove the drawer to access the wheel location and note orientation before removal.
• Remove fastener(s), install the new wheel assembly, and securely tighten; reuse existing hardware.
• Reinstall the drawer, check alignment, and test movement before returning to service.

This mounting bracket holds a control switch securely in place so the switch operates reliably. Replaces a damaged or broken switch bracket to restore proper switch alignment and tactile operation. What it does:

• Secures the control or door switch to the appliance chassis so the switch can actuate consistently
• Prevents switch movement that can cause intermittent operation or failure to start
• Helps maintain correct switch alignment, reducing false triggers or stuck switches
• Useful when the original bracket is cracked, bent, or has broken mounting tabs

• One bracket switch (mounting bracket) as shown

• High-level replacement: remove power and access the switch area before replacing the bracket
• Check switch alignment and actuator engagement before reassembling the appliance

This frame spring secures and supports the appliance frame assembly to maintain proper alignment and reduce movement during operation. It helps keep frame panels seated so doors and components close and seal correctly. What it does

• Provides tension to hold a frame or panel in the correct position
• Absorbs and dampens movement to prevent rattles and misalignment
• Can reduce stress on adjacent hinges, latches, or trim
• Commonly replaced when a frame is loose, rattles, or won't stay aligned

• One frame spring

• High-level replacement — power off and unplug the appliance before starting
• Access may require removing outer panels or trim; keep fasteners organized
• Wear gloves and eye protection; spring tension can cause sudden movement

This clip ring is a small retaining clip that secures shafts, hoses, or components in place to prevent movement or separation during operation. It provides a simple, durable hold to keep parts aligned and stable. What it does:

• Holds a shaft, hose, or assembly in position to prevent slipping or disengagement
• Keeps connected parts aligned to reduce vibration and wear
• Helps maintain seals and connections that can otherwise leak or come loose
• Commonly needed when a clip is broken, bent, or missing

• Disconnect power and water before beginning any repair
• Confirm correct orientation and seating before restoring operation
• Use appropriate hand tools (needle-nose pliers or retaining-clip tool) and avoid excessive force
• Replace any damaged fasteners or adjacent parts; do not reuse a deformed clip

This 4 oz grease tube lubricates appliance moving parts to reduce friction and quiet noisy components. It's a general-purpose service grease for small bearings, slides, hinges and other non-food-contact appliances. What it does:

• Lubricates bearings, rollers, door hinges and slides to reduce noise and wear
• Helps parts move smoothly and prevents sticking or binding
• Can reduce squeaks and grinding caused by dry or worn contact surfaces
• Suitable for occasional maintenance of motors and mechanical linkages

• One 4 oz tube of grease

• Clean the surface and remove old residue before applying a small amount of grease
• Use sparingly; excess grease can attract dirt or impede operation
• Keep grease away from electrical contacts and food-contact surfaces
• Wear gloves and wash hands after use; keep out of reach of children

This replacement power cord provides the main AC connection that supplies electrical power to the appliance. Restores safe, reliable power delivery when the original cord is worn, damaged, or fails. What it does

• Carries household mains power to the appliance so controls and motors can operate.
• Replaces cords that show frayed wires, exposed conductors, or burn marks.
• Fixes intermittent power loss or an appliance that won't power on due to cord failure.
• Eliminates safety hazards from damaged or heat-damaged cords.

• One power cord

• Always disconnect the appliance from power at the breaker or unplug before servicing.
• Route cord and secure strain relief per the appliance's service instructions; avoid pinching or kinking.