Parts for Craftsman 41AJPS-C799: General Assembly Parts

This is an extension boom and flex shaft assembly that is used in pole pruners and string trimmers. It is made to offer extra extensions so the pruner or trimmer can be used on items farther away from the user. It adds additional reach to make yard and garden tasks easier. The tube comes with an internal flexible drive shaft. It arrives to the user in a pre-assembled state and is ready to be installed. This shaft assembly can be used to replace a broken part or purchased to add reach to a pruner or trimmer that didn't come with one.This boom and flex shaft assembly requires no tools to be installed. Make sure the equipment it will be installed on is turned off, and the spark plug wire has been disconnected. Access the shaft and remove the broken boom and flex shaft assembly. The new replacement part can be installed by hand.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The extension boom and flex shaft assembly is designed to be used with string trimmers and pole pruners manufactured by MTD and Ryobi.

This coupler features a split-boom design that includes the knob, coupler, and the screws required to attach the upper shaft and lower boom before using the trimmer. Because of constant exposure and potential debris impacts, the coupler can become damaged over time and with regular use. The knob and screws can also become damaged or lost, which would require replacing the entire unit with an OEM replacement like the one here. This genuine OEM drive shaft coupler is manufactured by RYOBI and designed for use with their trimmers, as well as machines from MTD, Yard Man, Yard Machines, Bolens, Troy-Bilt, and Cub Cadet. It can also be used with select models of edgers and pruners from these brands. This coupler is sold as an individual assembly with all of the pieces required to complete the installation. The shaft is made of durable metal and the knob is a sturdy plastic piece. It will require a screwdriver with a Philips head to replace this part. Always wear gloves when working on lawn and garden equipment.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement in lawnmowers, snowblowers, string trimmers, pole pruners, and pole saws. The purpose of a screw in these devices is to affix and fasten components to one another through the process of rotation and piercing through the materials. A screw might have to be replaced in the standard lifespan of an outdoor appliance if it is lost, misplaced, or damaged. Check for punctures, tears, loosening, warping, or corrosion to the metal. This damage can stem from general wear and tear or from direct impact with a falling object or a surface. It can warp the component beyond repair, in which case it must be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, Murray, and Yard Man.

This part is a replacement bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, stripped or defective bolt in outdoor power equipment.Bolts are important for holding together various components of the equipment. They are a standard piece of hardware that can become easily lost, stripped, corroded, or defective, requiring replacement. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this bolt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This bolt can be used with different models of outdoor power equipment that have been manufactured by MTD, Craftsman, and other brands. Part sold individually.

The part listed is an MTD upper boom assembly. An upper boom assembly is manufactured for installation on various brands of string trimmers. The boom assembly is made up of the upper and lower assemblies, respectively. The purpose of the upper boom assembly on a string trimmer is to help power the trimmer head. Essentially, the boom assembly acts as the driveshaft of the string trimmer. The boom assembly can also be unlocked and extended, allowing the string trimmer to reach further distances or heightened elevations. When the boom assembly becomes damaged, the string trimmer may not function as a working unit. There is a possibility the machine still powers but still has issues with the trimmer head. To install, remove the handle assembly of the string trimmer. There are several screws and an anti-rotation screw that make up this assembly. Remove the trigger and trigger springs, and pull the handle assembly away from the throttle cable. Remove the anti-rotation screw from the shaft of the trimmer and loosen the clamp. This should allow the shaft to be separated from the motor. Repeat these steps in reverse to install the new boom assembly.This product is a genuine OEM part sourced directly from MTD. This product is compatible with MTD, Troy Bilt, RoboMow, and Remington trimmers.

This is a replacement drive shaft used in pruners, trimmers, and pole saws. The drive shaft connects the trimmer head to the engine, and usually runs the length of the trimmer stem. Any straight stem or curved stem trimmer will use the drive shaft as the primary means of turning the head of the trimmer (where all the cutting is done). If the equipment is not spinning, the drive shaft may need to be replaced.This is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is compatible with these manufacturing brands: Ryobi, Troy-Bilt, Yard Man, Bolens, MTD, and Cub Cadet equipment for trimmers and pruners.

This replacement part is an oil tank assembly. This is a genuine replacement part made by MTD. This part is responsible for holding the oil or fuel that is needed for many types of machines that run using this type of engine. A new oil tank assembly might be needed if the current one is damaged or broken in any way. This can be due to normal wear and tear after years of use. If the tank is cracked it may be leaking oil. If this is the case it is recommended that it be replaced as soon as possible. The repair should be fairly simple and only require common household tools. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This oil line is a genuine MTD part, sold individually. This oil line can be used as a replacement part in a pole saw. The purpose of the oil line in a pole saw is to provide a safe and guided passageway through which oil can channel into the appliance when the appliance is low on oil and requires additional fuel in order to continue its standard use.The oil line in a pole saw might be damaged at any point within its typical lifespan. If this damage occurs to the extent that the oil line is compromised and oil cannot be safely passed into the oil tank in order for the appliance to consume the oil at regular intervals, the oil line might have to be completely removed and replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil line is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, and Cub Cadet.

This is a genuine replacement chainsaw chain. Using a chain rather than a saw blade ensures that the tool lasts longer, cuts cleaner, and requires less sharpening and care than a blade would. The chain on a chainsaw can be easily taken off and replaced by this part to make the chainsaw work smoothly and efficiently. If the old chain is rusted or not cutting well, a replacement is needed for the chainsaw.To replace the chain, first, make sure that the machine is off and unplugged. Wear gloves when working, as the chain may be sharp. Bolts on the chainsaw will need to be loosened to release tension in the chain, and then the chain can be removed from the bar. The new replacement chain can then be added to the bar and screwed back in.This OEM replacement part is sourced directly from the manufacturer. It is sold individually. It is manufactured from Troy-Bilt and for use for any Troy-Bilt chainsaw.

This genuine replacement part is a MTD 8” bar for use with chainsaws.This chain bar is for use with chainsaw attachments. It is used to provide a seat for the chain. It is responsible for guiding the movement of the chain, the chainsaw's cutting element. A properly functioning chain bar is essential for the safe and reliable use of a chainsaw. The chain bar may become worn out or damaged due to extended use, and will require replacement. Wear on the guide bar is usually most severe on the underside of the bar. Remember to check the bar periodically to spot any wear or damage. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. A wrench or allen key may be needed for installation of this part. Please note: For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with Troy-Bilt and Cub Cadet chainsaws.

This OEM sprocket assembly contains a sprocket, which is a circular gear with teeth that engage with the links on a chain to move the chain forward.A new sprocket assembly will be needed if the part is broken in any way or if the sprocket teeth are worn off. If it's not immediately obvious to the eye, a test can be performed to determine if a new sprocket assembly is needed. Simply move the chain and if at any point the chain becomes stuck, this means a new sprocket assembly is needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine MTD part sourced directly from the manufacturer and is sold individually. The sprocket assembly is compatible with trimmers manufactured by either Troy-Bilt or Cub Cadet.

This is a replacement gear box assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a defective, broken, or worn out gear box assembly on various models of outdoor small engine power equipment. The gear box assembly, also referred to as the transmission, allows equipment to run smoothly and transition through gears. Over time, the gear box may become worn or faulty, preventing the equipment from functioning properly. Proper tools are required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. For more accurate information on how and where to install this gear box assembly, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this gear box assembly is suitable for use on several different models of string trimmers and pole pruners manufactured by MTD, Troy-Bilt, and Cub Cadet. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.