Parts for Craftsman 41BJLE-C799: General Assembly Parts

This replacement part is a drive shaft housing and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This drive shaft housing is found in trimmers and edgers and is the main part that connects the user controls to the bottom part of the trimmer. This part is important as it allows the user to control the power and settings of the trimmer from a standing position. A new drive shaft housing might be needed if the current one is damaged. The long pole that connects the user controls and the blade is the most important part of the trimmer and if it is damaged, the entire appliance may be unable to be used. Be sure to wear work gloves especially if the old drive shaft is damaged. The user might need to handle the blade so be careful of injury. This is an OEM This part is sold individually.

A lower flexible drive shaft is located inside lawn trimmer attachments. It is mounted inside the lower boom housing. The function of the part is to drive the trimmer head. The drive shaft will deteriorate and become more round with use. The rounded ends will ultimately fail to engage the trimmer head. The lower flexible drive shaft may also break or kink. The trimmer head stops quickly when this occurs. The trimmer will no longer function properly, and a replacement part is required.When replacing the lower flexible drive shaft in a trimmer, wear protective gloves. Start by removing the trimmer head, reel, and line assembly. Use a screwdriver to remove the outer head. Remove the guard assembly. Remove the bushing housing assembly. Access the lower flexible drive shaft and remove the damaged part. Lubricate the new part and install it with the lower flexible drive shaft's ring closest to the trimmer head. Reassemble the trimmer.This replacement part is an OEM genuine part supplied by the manufacturer. The lower flexible drive shaft can be used in MTD, Cub Cadet, Troy-Bilt, and Craftsman brand lawn trimmers. The part is sold individually. The lower flexible drive shaft is made of durable materials.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Screws are found in almost every different type of machinery and are essential to the overall performance of different devices. Screws are responsible for holding things in place and securing them tightly so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is damaged or missing. It is possible for screws to be stripped over time and can become stuck in place. In this case, pliers might be needed to remove the faulty screw. Otherwise, this repair should be fairly simple and only require a screwdriver. Be sure the machine is powered down before replacing this part. This specific screw is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as many devices require more than one.

This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.

This blade guard is a genuine MTD part, sold individually. This blade guard can be used as a replacement part for a string trimmer. This blade guard protects the blades of the string trimmer so that they are not damaged upon impact with the surface on which the string trimmer is being operated.The blade guard might have to be replaced at some point within the standard lifespan of the appliance in the event that the component suffers damage. This could occur if the blade guard is chipped, torn, punctured, or sufficiently eroded to the point that the blades are directly exposed to potential impact with hard surfaces. The blade guard needs to be removed and replaced with this genuine OEM replacement part if the blades are exposed or are at risk of exposure over general long-term usage.This is an OEM part sourced directly from the manufacturer. It is sold individually. This blade guard is compatible with the following brands: MTD, Craftsman, and Cub Cadet.

This deflector is a genuine MTD part. It is designed to be a replacement part on certain makes and models of string trimmers and handhelds.On string trimmers, the deflector protects the user while the trimmer is in use from flying debris. Because it frequently comes into contact with debris, it is very common for it to break or become damaged through routine use. It is an important safety feature so it must be replaced before it is used again.This deflector is a genuine OEM part sourced directly from the manufacturer. It is sold individually, though it does come with the hardware necessary to replace it. It is compatible with machines made by ClickLink, Craftsman, Cub Cadet, MTD, and Trimmer Plus.

Made for edgers and trimmers, the edger blade is a quality replacement component. This part is responsible for edging level ground near sidewalks and driveways to create an appealing aesthetic. When the equipment is used on a regular basis, the edger blade will start to get dull and will not provide the same performance as it did when new. If the edger blade has become dull and is smaller than it was originally, it's likely that it should be replaced.Take a look at the edger blade to see if there is any damage. If it has a chipper blade or other issues, it needs to be replaced. The edger blade can be reached by placing the tool on its side on a stable surface and using a screwdriver to ensure the spindle is locked. The washer nut will need to be removed to make the replacement.This is an edger blade that is made to be used with string trimmers and edgers manufactured by MTD, Ryobi, and Troy-Bilt. It is sold as an individual part. The edger blade is a genuine OEM replacement part that is sourced directly from the manufacturer.

This is a blade lock nut that is typically a component of string trimmers and edgers. The blade lock nut ensures the cutting blade is securely attached to the shaft of the trimmer. If the nut is corroded, broken, or has come loose, it will need to be replaced. The equipment should not be operated without this nut since other components could come loose and fall off.This is a simple part to replace and will require only a wrench or a socket set. This nut is located on the spindle, so a visual inspection can be done to ensure it is damaged or broken. Remove it and thread the new blade lock nut to the same location. If the nut is stripped, a bolt remover can be used to get it off of the lawn equipment.This blade lock nut is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is made to fit a variety of edgers and string trimmers manufactured by Craftsman, Cub Cadet, MTD, Ryobi, and Yard Machines.

This replacement part is a nut, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Nuts are a small part found in many different types of machinery and are used to connect different parts and secure things together.A new nut might be needed if the current ones are missing or damaged in any way. It is common that nuts become stripped overtime and might get stuck or fall out of place. In this case, it is recommended that the nut be replaced. Be sure to review the specific owner's manual for more information on how to replace the nuts. This part is sold as an individual piece. Be sure to purchase the correct amount as many different machines use more than one during operation. This is also a genuine OEM replacement part sourced directly from the manufacturer.

This is a genuine replacement part for a knob-wing on a lawnmower. This part is made of red plastic. The carriage screw for the interior is sold separately.The knob wing is what holds the lever handle to the base of the lawnmower. It holds the unit together so that it doesn't fall apart. The old part can be unscrewed and replaced with this replacement part.This is an OEM replacement part sourced directly from the manufacturer and it is sold individually. It is for use with these brands: MTD, Yard-Man, Troy-Bilt, Cub Cadet, and Husky.

A carriage bolt is a type of fastener. It features a smooth rounded head and a square domed top. It has threading, which leads to up to the square shoulder. The purpose of its square is to prevent the bolt from spinning. Once the carriage bolt is inserted through the hole, using a nut and washer can provide additional security. Carriage bolts can corrode and loosen over time. Since it doesn't have a slotted head, a socket wrench is needed when replacing. This bolt carriage replacement is compatible with wood chippers, tillers, string trimmers, lawnmowers, and edgers. It is a genuine MTD product that measures 5/16x.075. It has a smooth rounded head and square shoulder underneath it. This carriage bolt is sold individually.

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.