Parts for Craftsman 41CD604G799: General Assembly Parts

This is a throttle trigger assembly for a string trimmer. This part is used to engage the throttle cable, which opens the carburetor to add more of a mix of fuel and air into the combustion chamber. A new throttle trigger assembly will be needed if it is damaged in a way that prevents it from operating correctly. It could be broken by physical impact or could wear out with normal extended use. If the throttle trigger is not effectively actuating the throttle cable, it will need to be replaced. Allow the trimmer plenty of time to cool down before attempting to perform any care or maintenance on the machine.This throttle trigger is made to be used with string trimmers. It's an OEM part sourced directly from the manufacturer and it is sold individually. This part is used on MTD, Craftsman, Yard Machines, McCulloch, Remington, White Outdoor, and Troy-Bilt brands.

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This D-handle assembly is a genuine MTD part, sold individually. This D-handle assembly can be used as a replacement part in a string trimmer. The purpose of a D-handle in a string trimmer is to allow the operator to clutch onto the component during the typical use of the appliance for stability and safety while clutching onto the throttle to regulate the speed of the appliance.The D-handle assembly can suffer damage as a result of general wear and tear from long-term use or as a result of a collision with a hard object. If this occurs, the D-handle should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This D-handle assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, and Troy-Bilt.

This replacement part is a drive shaft. This part is a genuine replacement part made by MTD. This part is used to help control the settings in many different types of lawnmowers.A new drive shaft might be needed if the user notices that the current one is missing or damaged in any way. This can be due to wear and tear over time and is common in this part. Be sure to refer to the owner's manual before attempting to replace this part. It is also recommended that the engine be completely powered off and cooled down before beginning this repair. Work gloves are also recommended to prevent injury during the job as parts nearby can be harmful.This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This screw and nuts set is a genuine MTD part, sold individually. This screw and nuts set can be used as a replacement part in a string trimmer. This set provides a variety of screws and nuts which serve as fastening components within the string trimmer.The screw and nuts set in a string trimmer might have to be ordered as a complete replacement part if one or more screws or nuts in the string trimmer has been lost, misplaced, or damaged. If this occurs, the screw and nuts set should be ordered as a genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw and nuts set is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Bolens, and Yard Man.

This is a trimmer head used with string trimmers, weed wackers, and edgers. When in use, it rotates, cutting grass. If the trimmer head stops rotating or cutting grass, it is time to order a replacement part. In order to complete the replacement process for trimmer heads, the user will need to pry the trimmer head off of the trimmer. Use a flathead screwdriver to loosen it. After pulling the old trimmer head off the nut on the bottom of the shaft, insert this replacement head onto the trimmer shaft.This trimmer head is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

This part is a replacement blade driver. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken blade driver in line trimmers.Blade drivers help to ensure the line trimmer blade rotates on the gearbox shaft and so is an essential component and should be replaced if faulty. This part may become corroded, worn, jammed, or otherwise damaged over time, requiring replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular blade driver, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This blade driver can be used with a variety of line trimmer models manufactured by Craftsman, MTD, Troy-Bilt, and other brands.

This replacement part is a palnut. This is a genuine replacement part made by MTD. Palnuts are small but important to the overall workings of appliances. These parts work with other small pieces like screws and washers to ensure that the machine is able to work properly during use. A new palnut might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of extended use or from a single incident that may have caused damage. It is normal for this part to endure large amounts of friction over time, and so it can become worn down with extended use. This palnut is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer. "

This tube line is a genuine MTD part, sold individually. This tube line can be used as a replacement part for string trimmers. The function of the tube line for a string trimmer is to spool out of the trimmer head assembly and rotate such that it can cut through grass, hedges, bushes, and other greenery. Over the standard lifespan of an average string trimmer, the tube line might suffer damage that can stop it from rotating and cutting properly. If the tube line is knotted and cannot be unspooled from the head assembly, it can be repaired. However, if this happens frequently or if the problem is not solvable with the existing tube line, the broken or malfunctioning tube line should immediately be replaced by this genuine OEM replacement part before using the string trimmer again. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This tube line is compatible with the following brands: MTD and Craftsman.

This replacement part is a locking rod. This is a genuine replacement part made by MTD. This specific part is found in many different machines and is important for ensuring the user is kept safe if the compressed air supply fails.A new locking rod might be needed if the current one is damaged or missing. This can include being dented, cracked, or bent. If the user is noticing issues inside the machine, such as issues with the air compression, it can be due to a malfunctioning locking rod. Be sure the engine is powered down during this repair. Refer to the appropriate user manual before beginning to repair this part. This locking rod is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.