Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools.
Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.
Symptoms of a bad On/Off Switch include:
This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.
This is a throttle trigger assembly for a string trimmer. This part is used to engage the throttle cable, which opens the carburetor to add more of a mix of fuel and air into the combustion chamber. A new throttle trigger assembly will be needed if it is damaged in a way that prevents it from operating correctly. It could be broken by physical impact or could wear out with normal extended use. If the throttle trigger is not effectively actuating the throttle cable, it will need to be replaced. Allow the trimmer plenty of time to cool down before attempting to perform any care or maintenance on the machine.This throttle trigger is made to be used with string trimmers. It's an OEM part sourced directly from the manufacturer and it is sold individually. This part is used on MTD, Craftsman, Yard Machines, McCulloch, Remington, White Outdoor, and Troy-Bilt brands.
This replacement part is a bolt. This is a genuine replacement part made by MTD. Bolts are small but important to the overall workings of the machine. They work with other parts such as screws and nuts to ensure that certain pieces are held in place and are secure during use. A new bolt might be needed if the current one has become loose, is missing, or has been damaged in any way. If the bolt had been dented, bent, or logged in place, be sure to replace it as soon as possible. This should be a fairly simple repair and only require common household tools such as a screwdriver and pliers. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.
This screw is a genuine MTD part, sold individually. This screw can be used as a replacement in lawnmowers, snowblowers, string trimmers, pole pruners, and pole saws. The purpose of a screw in these devices is to affix and fasten components to one another through the process of rotation and piercing through the materials. A screw might have to be replaced in the standard lifespan of an outdoor appliance if it is lost, misplaced, or damaged. Check for punctures, tears, loosening, warping, or corrosion to the metal. This damage can stem from general wear and tear or from direct impact with a falling object or a surface. It can warp the component beyond repair, in which case it must be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, Murray, and Yard Man.
The part listed is an MTD upper boom assembly. An upper boom assembly is manufactured for installation on various brands of string trimmers. The boom assembly is made up of the upper and lower assemblies, respectively. The purpose of the upper boom assembly on a string trimmer is to help power the trimmer head. Essentially, the boom assembly acts as the driveshaft of the string trimmer. The boom assembly can also be unlocked and extended, allowing the string trimmer to reach further distances or heightened elevations. When the boom assembly becomes damaged, the string trimmer may not function as a working unit. There is a possibility the machine still powers but still has issues with the trimmer head. To install, remove the handle assembly of the string trimmer. There are several screws and an anti-rotation screw that make up this assembly. Remove the trigger and trigger springs, and pull the handle assembly away from the throttle cable. Remove the anti-rotation screw from the shaft of the trimmer and loosen the clamp. This should allow the shaft to be separated from the motor. Repeat these steps in reverse to install the new boom assembly.This product is a genuine OEM part sourced directly from MTD. This product is compatible with MTD, Troy Bilt, RoboMow, and Remington trimmers.
This lower flexible drive shaft is made of metal and is used to operate the cutting head on garden trimmers. It is secured within the equipment's draft shaft housing. If the drive shaft is damaged, the rest of the machine will not function correctly and could become a danger to the user.Over time, the lower flexible drive shaft may start to wear out and require a replacement. There is also the risk of damage to the drive shaft due to corrosion. If there are any issues with the drive shaft, it should be replaced as soon as possible. Replacement of the part will be easier with a screwdriver.The lower flexible drive shaft is compatible with many types of machines and tools for outdoor lawn and garden use. Compatible machine types include handheld trimmers, handheld blowers, handheld snow throwers, and electric and gas trimmers. This is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually.
A hex screw fastens and holds two components together. It has a hexagonal head and features threading starting underneath the shoulder down to the tip. Its all-metal construction offers rigidity and longer lifespan. It is also threaded, so you can conveniently loosen or tighten in position. It measures 1/4-20 x 0.5 inch and comes in brass or gold color. Take note that this replacement hex screw may beused in different locations of a machine. Double check the device’s model number for compatibility. To install this hex screw, you will need a hex wrench or a hex socket. This hex screw is a replacement made by MTD. This screw/bolt may be used on lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, chainsaws, pole pruners, log splitters, or wood chippers made by Craftsman, Toro, Cub Cadet, Ryobi, Troy-Bilt, Husky, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, or MasterCut. This OEM hex screw is sold individually.
This OEM sprocket assembly contains a sprocket, which is a circular gear with teeth that engage with the links on a chain to move the chain forward.A new sprocket assembly will be needed if the part is broken in any way or if the sprocket teeth are worn off. If it's not immediately obvious to the eye, a test can be performed to determine if a new sprocket assembly is needed. Simply move the chain and if at any point the chain becomes stuck, this means a new sprocket assembly is needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine MTD part sourced directly from the manufacturer and is sold individually. The sprocket assembly is compatible with trimmers manufactured by either Troy-Bilt or Cub Cadet.
This is a replacement gear box assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended to replace a defective, broken, or worn out gear box assembly on various models of outdoor small engine power equipment. The gear box assembly, also referred to as the transmission, allows equipment to run smoothly and transition through gears. Over time, the gear box may become worn or faulty, preventing the equipment from functioning properly. Proper tools are required to replace this part. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is turned off and completely cooled down before starting any repairs. For more accurate information on how and where to install this gear box assembly, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this gear box assembly is suitable for use on several different models of string trimmers and pole pruners manufactured by MTD, Troy-Bilt, and Cub Cadet. This is a genuine part made of high-quality, durable, non-corrosive materials and is sold individually.
There are multiple uses for the 5/16-18 Hex Screw. It is often used with small gasoline-powered yard equipment such as lawn and garden machines. While hex screws such as these may be used in edgers and snowblowers, the most frequent use this screw is in yard tractors. This variety of screw is commonly used in attaching the various appendages of gas-powered equipment to a central operating platform. In particular, these hex screws are used to secure the engine block of power tools to the frame or housing of the equipment. Once in place, these fasteners have an almost unbreakable strength to them. This is so much so the case that often, in order to detach the engine manifold and repair the inner workings of an engine, the bolts must be chiseled or cut loose. In such cases, it is necessary for the bolts to be replaced during reassembly. Manufacturers insist that genuine OEM replacement parts be used in the rebuilding process. These replacement parts were manufactured to the same exacting specifications used to make the original screws. These OEM screws are compatible with equipment made and sold by Yard-Man, Cub Cadet, Troy-Bilt, Husky, MTD, Bolens, and Yard Machines.
This replacement part is an oil tank assembly. This is a genuine replacement part made by MTD. This part is responsible for holding the oil or fuel that is needed for many types of machines that run using this type of engine. A new oil tank assembly might be needed if the current one is damaged or broken in any way. This can be due to normal wear and tear after years of use. If the tank is cracked it may be leaking oil. If this is the case it is recommended that it be replaced as soon as possible. The repair should be fairly simple and only require common household tools. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.
Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.
This oil line is a genuine MTD part, sold individually. This oil line can be used as a replacement part in a pole saw. The purpose of the oil line in a pole saw is to provide a safe and guided passageway through which oil can channel into the appliance when the appliance is low on oil and requires additional fuel in order to continue its standard use.The oil line in a pole saw might be damaged at any point within its typical lifespan. If this damage occurs to the extent that the oil line is compromised and oil cannot be safely passed into the oil tank in order for the appliance to consume the oil at regular intervals, the oil line might have to be completely removed and replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil line is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, and Cub Cadet.
A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.