Need Help?
Call or text
Show parts
Upper boom assembly for gas line trimmers. Connects the engine housing to the cutting head. Replace if cracked, bent, or structurally damaged.
Usually ships within 4 - 14 days
Throttle grip assembly for gas line trimmers. Replace this control handle if the original is cracked, broken, or worn from use. Mounts to the shaft.
The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools.
Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.
Symptoms of a bad On/Off Switch include:
This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.
This is a throttle trigger assembly for a string trimmer. This part is used to engage the throttle cable, which opens the carburetor to add more of a mix of fuel and air into the combustion chamber. A new throttle trigger assembly will be needed if it is damaged in a way that prevents it from operating correctly. It could be broken by physical impact or could wear out with normal extended use. If the throttle trigger is not effectively actuating the throttle cable, it will need to be replaced. Allow the trimmer plenty of time to cool down before attempting to perform any care or maintenance on the machine.This throttle trigger is made to be used with string trimmers. It's an OEM part sourced directly from the manufacturer and it is sold individually. This part is used on MTD, Craftsman, Yard Machines, McCulloch, Remington, White Outdoor, and Troy-Bilt brands.
Trigger spring for lawn tractors and gas-powered outdoor equipment. Replaces broken, worn, or missing springs that affect trigger operation.
Handle assembly for gas line trimmers. Installs on the shaft to provide grip and control. Replace if cracked, broken, or worn from regular use.
Replacement bolt for lawn tractors and trimmers. Secures components and panels in place. Needed when original bolt is stripped, rusted, or missing.
Fastening screw for lawn mowers, snow throwers, and trimmers. Secures components together. Replace if stripped, corroded, or missing during repairs.
Upper boom assembly for gas line trimmers. Connects the engine housing to the lower shaft. Replace if cracked, bent, or damaged from impact or wear.
Fix a trimmer that won't spin or cuts poorly with this lower flexible drive shaft assembly. Connects the motor to the cutting head for proper operation.
Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.
This OEM sprocket assembly contains a sprocket, which is a circular gear with teeth that engage with the links on a chain to move the chain forward.A new sprocket assembly will be needed if the part is broken in any way or if the sprocket teeth are worn off. If it's not immediately obvious to the eye, a test can be performed to determine if a new sprocket assembly is needed. Simply move the chain and if at any point the chain becomes stuck, this means a new sprocket assembly is needed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This is a genuine MTD part sourced directly from the manufacturer and is sold individually. The sprocket assembly is compatible with trimmers manufactured by either Troy-Bilt or Cub Cadet.
Trimmer head not spinning or making grinding noises? This gear box assembly transfers power from the engine to the cutting head. Moderate DIY repair.
Secures components on gas line trimmers and handheld products. Replace this screw if damaged, stripped, missing, or no longer holding parts firmly in place.
There are multiple uses for the 5/16-18 Hex Screw. It is often used with small gasoline-powered yard equipment such as lawn and garden machines. While hex screws such as these may be used in edgers and snowblowers, the most frequent use this screw is in yard tractors. This variety of screw is commonly used in attaching the various appendages of gas-powered equipment to a central operating platform. In particular, these hex screws are used to secure the engine block of power tools to the frame or housing of the equipment. Once in place, these fasteners have an almost unbreakable strength to them. This is so much so the case that often, in order to detach the engine manifold and repair the inner workings of an engine, the bolts must be chiseled or cut loose. In such cases, it is necessary for the bolts to be replaced during reassembly. Manufacturers insist that genuine OEM replacement parts be used in the rebuilding process. These replacement parts were manufactured to the same exacting specifications used to make the original screws. These OEM screws are compatible with equipment made and sold by Yard-Man, Cub Cadet, Troy-Bilt, Husky, MTD, Bolens, and Yard Machines.
This replacement part is an oil tank assembly. This is a genuine replacement part made by MTD. This part is responsible for holding the oil or fuel that is needed for many types of machines that run using this type of engine. A new oil tank assembly might be needed if the current one is damaged or broken in any way. This can be due to normal wear and tear after years of use. If the tank is cracked it may be leaking oil. If this is the case it is recommended that it be replaced as soon as possible. The repair should be fairly simple and only require common household tools. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.
Fuel cap assembly for gas line trimmers. Seals the fuel tank to prevent leaks and maintain pressure. Replace if cracked, broken, or missing gasket.
Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.
This oil line is a genuine MTD part, sold individually. This oil line can be used as a replacement part in a pole saw. The purpose of the oil line in a pole saw is to provide a safe and guided passageway through which oil can channel into the appliance when the appliance is low on oil and requires additional fuel in order to continue its standard use.The oil line in a pole saw might be damaged at any point within its typical lifespan. If this damage occurs to the extent that the oil line is compromised and oil cannot be safely passed into the oil tank in order for the appliance to consume the oil at regular intervals, the oil line might have to be completely removed and replaced by this genuine OEM replacement part as soon as possible.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This oil line is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, and Cub Cadet.
Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.