Parts for Murray 41ADZ01C758: General Assembly Parts

The On/Off Switch is an OEM part for MTD outdoor power equipment. This switch is a crucial component for the safe operation of various types of lawn and garden equipment, including lawn mowers, snow blowers, and other powered tools. 

Causes of damage to the On/Off Switch often involve wear and tear from regular use, exposure to harsh outdoor conditions that can corrode or damage electrical components, or accidental impacts that can physically damage the switch.

Symptoms of a bad On/Off Switch include:

• The equipment failing to start
• The machine not stopping when the switch is turned to the off position
• Intermittent power or erratic starting and stopping

This OEM replacement part can be used on trimmers from Craftsman, Yard-Man, Cub Cadet, Bolens, Ryobi, Huskee, Troy-Bilt, MTD, Murray, and Yard Machines.

This throttle trigger is designed to open and close the throttle, or to control the speed of the engine. This part is mounted to the control handle on the equipment's shaft. With constant use, the throttle trigger may break or wear out. Use this genuine OEM throttle trigger in red to easily replace a damaged one. A screwdriver and long-nose pliers will be needed for the job. This OEM replacement throttle trigger is compatible with specific models of edgers and trimmers from Bolens, Craftsman, Cub Cadet, MTD, Ryobi, Troy-Bilt, and Yard-Man. It is sold individually.

This throttle trigger spring is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD. This throttle trigger spring is designed for use with edgers or trimmers. It is compatible with products from brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.The throttle trigger spring part is crucial to the proper functioning of the throttle. The purpose of the throttle trigger spring is to help the throttle trigger to retract. The replacement or repair process of the throttle trigger spring should be straightforward, but a screwdriver and pliers will be necessary to complete the replacement. The user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This throttle trigger spring is made out of metal.

This lower boom assembly is for use with gas trimmers. Another name for the part is a lower shaft assembly. It is a replacement used for missing or faulty lower shaft housing assemblies on the trimmer. The lower housing is responsible for holding the spool that cuts the grass.If there is a problem with this component in the trimmer, it will not function properly and could be dangerous to operate. The lower housing may not be able to hold the spool properly. The shaft on the trimmer is durable, but it could become damaged during operation. There is also the chance that corrosion could affect the quality of the lower boom over time. Whenever there is a problem with the shaft, the best course of action is to replace it before it breaks entirely.The lower boom assembly for trimmers is compatible with a range of models from MTD, Yard Machines, and Murray. It is made from durable metal. This is a genuine OEM part sourced from the manufacturer. It is sold individually.

This part is a replacement debris guard. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current debris guard is defective, this part can be used as a replacement. It is intended for use with a variety of line trimmer models.The debris guard helps to ensure the user is protected from the trimming line, as well as from any debris that may be kicked up during use. This part is essential to safe equipment use and should be replaced if rendered ineffective in any way. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this debris guard, the appropriate owner's manual and equipment diagrams should be referred to. This debris guard is suitable for use on a variety of line trimmer models manufactured by MTD, Craftsman, Troy-Bilt, and other brands. It is a genuine OEM part and thus is made of high-quality, durable materials. Part sold individually.

This reel is a genuine MTD replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The function of a reel in a lawn trimmer is to collect the line in the reel housing and then unspool the line from the housing while the lawn trimmer is in use. Within the lifespan of a lawn trimmer, it is likely that the reel will suffer some damage. This might result in issues with unspooling the line, rendering the lawn trimmer impossible to use. Damage to the reel might occur as a result of general wear and tear, overuse, exposure to the elements, or collision with the ground or another object; additionally, the reel could suffer from gradual deterioration in the form of anything from small cuts and nicks to serious piercings and erosion. If the reel is damaged to the point that the lawn trimmer is unusable, the reel should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This reel is compatible with the following brands: MTD and Craftsman. This part sold individually.

Bump head trimmers use the impulse of a bump against the earth to release a measured amount of cutting twine from the spool. In actual use, this happens so quickly that an observer may not realize the user has bumped for more twine and resumed trimming. A simple but absolutely necessary piece of this procedure is the bump head spring that sits beneath the plastic bump cover and the cutting head. The spring signals the cutting head to release twine. While this system functions quite well and is the default method used by most grass trimmers, it should be noted that the spring can fail for a couple of reasons. First is simple overuse, revealed when the spring doesn't produce enough bounce back to cause the spool to release twine. This is the result of constant bumping. A second problem that arises is the stress the spring undergoes when twice spools are constantly changed. It is often the case that springs are incorrectly placed and bent in the process. When replacing the spring, it's essential to use one like this one, an OEM certified replacement that identically matches the original. This spring is compatible with Craftsman, Bolen, and Troy-Bilt trimmers.

The inner spool reel is a genuine replacement part for select models of string trimmers. The inner reel is where the string for the trimmer is wound. Once the string has been wound around the reel, it is attached to the outer spool assembly and then threaded onto the trimmer and secured in place. This part is regularly exposed to repetitive motion and ground contact, and it can become damaged with use and require a replacement. With a genuine OEM part, owners can guarantee an exact fit for their compatible machines. This inner reel is manufactured to specific standards by MTD for use on hundreds of trimmers, including those from MTD, RYOBI, Cub Cadet, Yard Man, Bolens, Yard Machines, and Troy-Bilt. This reel does not require any tools to install. Use caution when winding the trimmer line so as not to create tangles that could jam the trimmer while it is being used. Disengage the engine before working on trimmers and always wear eye and hand protection for added safety. This inner reel is made of durable plastic and sold as a single unit. Other components will need to be purchased separately.

A bump head knob is a part of a string trimmer. When the trimmer is tapped against the ground or any hard surface, it will let out more line. This component, which is primarily made from rubber, is also responsible for securing the spool to the trimmer head. Over time, a bump knob can break. If it is damaged, the trimmer won't release more lines. It is easy to install a brand-new bump head knob replacement. First, get a screwdriver and unscrew the old bump knob. Grab the replacement and screw it to the trimmer head. Tighten it for a secure fit. This replacement only comes with a bump head knob. It doesn't have other string trimmer replacement parts. For an efficient, compatible part replacement, choose this MTD 791-153066B Bump Head Knob. You can use it with string trimmer models made by MTD, Bolens, Yard-Mad, Yard Machines, Craftsman, Troy-Bilt, and Ryobi. It is a genuine OEM part that is sold individually.

This genuine MTD reel and line assembly can be used as a replacement part for string trimmers. The function of a reel and line assembly in a string trimmer is to spool and unspool the line that spins and spreads out to cut grass, shrubs, bushes, and other such greenery.A reel and line assembly might have to be replaced if there is damage to the spool such that it cannot dispense the line from the string trimmer. This damage can come as a result of general wear and tear or a direct impact collision that warps the part and prevents it from serving its function. If this kind of damage occurs to the reel and line assembly, this genuine OEM replacement part should be ordered immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This reel and line assembly is compatible with the following brands: MTD, Ryobi, Yard Machines, Bolens, and Yard Man.