Parts for Trimmer Plus 41AJBP-C954: General Assembly Parts

This is an extension boom and flex shaft assembly that is used in pole pruners and string trimmers. It is made to offer extra extensions so the pruner or trimmer can be used on items farther away from the user. It adds additional reach to make yard and garden tasks easier. The tube comes with an internal flexible drive shaft. It arrives to the user in a pre-assembled state and is ready to be installed. This shaft assembly can be used to replace a broken part or purchased to add reach to a pruner or trimmer that didn't come with one.This boom and flex shaft assembly requires no tools to be installed. Make sure the equipment it will be installed on is turned off, and the spark plug wire has been disconnected. Access the shaft and remove the broken boom and flex shaft assembly. The new replacement part can be installed by hand.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The extension boom and flex shaft assembly is designed to be used with string trimmers and pole pruners manufactured by MTD and Ryobi.

This coupler features a split-boom design that includes the knob, coupler, and the screws required to attach the upper shaft and lower boom before using the trimmer. Because of constant exposure and potential debris impacts, the coupler can become damaged over time and with regular use. The knob and screws can also become damaged or lost, which would require replacing the entire unit with an OEM replacement like the one here. This genuine OEM drive shaft coupler is manufactured by RYOBI and designed for use with their trimmers, as well as machines from MTD, Yard Man, Yard Machines, Bolens, Troy-Bilt, and Cub Cadet. It can also be used with select models of edgers and pruners from these brands. This coupler is sold as an individual assembly with all of the pieces required to complete the installation. The shaft is made of durable metal and the knob is a sturdy plastic piece. It will require a screwdriver with a Philips head to replace this part. Always wear gloves when working on lawn and garden equipment.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement in lawnmowers, snowblowers, string trimmers, pole pruners, and pole saws. The purpose of a screw in these devices is to affix and fasten components to one another through the process of rotation and piercing through the materials. A screw might have to be replaced in the standard lifespan of an outdoor appliance if it is lost, misplaced, or damaged. Check for punctures, tears, loosening, warping, or corrosion to the metal. This damage can stem from general wear and tear or from direct impact with a falling object or a surface. It can warp the component beyond repair, in which case it must be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, Murray, and Yard Man.

This part is a replacement bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, stripped or defective bolt in outdoor power equipment.Bolts are important for holding together various components of the equipment. They are a standard piece of hardware that can become easily lost, stripped, corroded, or defective, requiring replacement. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this bolt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This bolt can be used with different models of outdoor power equipment that have been manufactured by MTD, Craftsman, and other brands. Part sold individually.

The part listed is an MTD upper boom assembly. An upper boom assembly is manufactured for installation on various brands of string trimmers. The boom assembly is made up of the upper and lower assemblies, respectively. The purpose of the upper boom assembly on a string trimmer is to help power the trimmer head. Essentially, the boom assembly acts as the driveshaft of the string trimmer. The boom assembly can also be unlocked and extended, allowing the string trimmer to reach further distances or heightened elevations. When the boom assembly becomes damaged, the string trimmer may not function as a working unit. There is a possibility the machine still powers but still has issues with the trimmer head. To install, remove the handle assembly of the string trimmer. There are several screws and an anti-rotation screw that make up this assembly. Remove the trigger and trigger springs, and pull the handle assembly away from the throttle cable. Remove the anti-rotation screw from the shaft of the trimmer and loosen the clamp. This should allow the shaft to be separated from the motor. Repeat these steps in reverse to install the new boom assembly.This product is a genuine OEM part sourced directly from MTD. This product is compatible with MTD, Troy Bilt, RoboMow, and Remington trimmers.

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.