Parts for Trimmer Plus 41BJAF30902: General Assembly Parts

This is an accessory hanger that is intended for use with a variety of lawn and garden equipment. It attaches to equipment so the tool can be hung up for storage. The hanger can help to ensure that tools are easy to access in an out of the way space.The hanger that is currently on the machine could be damaged or could crack after a lot of use, and it might need to be replaced. It is an easy replacement and should only take a matter of minutes at most.This hanger can be used with trimmers, edgers, pruners, blowers, and cultivators from Ryobi, Troy-Bilt, MTD, and Cub Cadet. Each hanger is sold individually. Owners with multiple pieces of equipment will want to buy as many as needed. This is a genuine OEM part sourced from the manufacturer.

This replacement part is a boom assembly. It is a genuine replacement part made by MTD. This specific part is typically found in grass cutters and edgers. The part is able to connect the top of the appliance to the bottom where the blades are located. This is so that the user is able to operate the machine from the standing position and control the user settings as needed when in use.A new boom assembly might be needed if the current one is damaged in any way including being dented, bent, or cracked. It is important that this part is in working condition or the user might not be able to perform the necessary duties and might struggle to operate the edger. This boom assembly is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

A lower flexible drive shaft is located inside lawn trimmer attachments. It is mounted inside the lower boom housing. The function of the part is to drive the trimmer head. The drive shaft will deteriorate and become more round with use. The rounded ends will ultimately fail to engage the trimmer head. The lower flexible drive shaft may also break or kink. The trimmer head stops quickly when this occurs. The trimmer will no longer function properly, and a replacement part is required.When replacing the lower flexible drive shaft in a trimmer, wear protective gloves. Start by removing the trimmer head, reel, and line assembly. Use a screwdriver to remove the outer head. Remove the guard assembly. Remove the bushing housing assembly. Access the lower flexible drive shaft and remove the damaged part. Lubricate the new part and install it with the lower flexible drive shaft's ring closest to the trimmer head. Reassemble the trimmer.This replacement part is an OEM genuine part supplied by the manufacturer. The lower flexible drive shaft can be used in MTD, Cub Cadet, Troy-Bilt, and Craftsman brand lawn trimmers. The part is sold individually. The lower flexible drive shaft is made of durable materials.

This replacement part is a gearbox intended for use in grass trimmers. This is a genuine replacement part made by MTD. Gearboxes connect the main handle of the appliance to the rotating blade attachment. It is important that this part is secure as the blade cutter can be dangerous if loose.A new gearbox might be needed if the current one is broken or damaged in any way. It is not unusual for this part to require replacement after years of normal use as it's easy for the gearbox to become stripped down. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with grass trimmers made by MTD.

This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Screws are found in almost every different type of machinery and are essential to the overall performance of different devices. Screws are responsible for holding things in place and securing them tightly so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is damaged or missing. It is possible for screws to be stripped over time and can become stuck in place. In this case, pliers might be needed to remove the faulty screw. Otherwise, this repair should be fairly simple and only require a screwdriver. Be sure the machine is powered down before replacing this part. This specific screw is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as many devices require more than one.

The guard assembly on trimmers is a safety feature that should not be removed and should be replaced if it is missing. The guard has several important functions on the trimmer. The guard prevents debris and trimmings from flying back on the operator. The trimmer guard also controls the amount of trimmer line out, which helps maintain engine life. If the guard is missing, the engine is put under more stress. Lastly, the guard cuts the line when necessary. If the guard is damaged, it should be replaced to extend the life of the trimmer engine and protect the operator. Remove the spark plug before replacing the guard assembly. Wear work gloves when working on the trimmer. Turn the trimmer over and locate the screws holding it in place. Remove the screws and take the guard off the trimmer. Install the new guard with the screws from the original guard and reinstall the spark plug. This guard assembly is an authentic OEM part that is sourced directly from the manufacturer for use on trimmers manufactured by Craftsman and MTD. It is a black molded plastic part that is sold individually. It does not come with screws.

The Aero-Flex cutting head assembly is a replacement attachment for use with certain models of trimmers. The cutting head assembly features the blades that are used for line trimming without the need for the usual spools, springs, and rewinding found with other types of trimmer heads. If the current trimmer head is not functioning properly or is worn out, owners might want to consider replacing it with this option.The cutting head assembly is durable and highly functional thanks to the bladed design. It will easily snap into place, which makes replacing the cutting head fast and easy. There is no need for any special tools when switching it out.The Aero-Flex cutting head for use with line trimmers can work with models from MTD and Troy-Bilt. Keep in mind that this piece is sold individually. Some owners might want to buy more than one of the cutting heads at once, so they can have extra on hand when they are needed. This is a genuine OEM replacement part that is sourced from the manufacturer.

This aero-flex cap is a genuine MTD part, sold individually. This aero-flex cap can be used as a replacement part in a string trimmer. The purpose of an aero-flex cap in a string trimmer is to affix onto the top of an aero-flex cutting head, which functions as a means of spooling and unspooling the string that cuts through various types of greenery while the appliance is in operation.The aero-flex cap might have to be replaced if it is lost, misplaced, or sufficiently damage to render its function reduced or negated. This could occur if the aero-flex cap has been punctured, torn, scraped, dented, cracked, or otherwise damaged beyond repair. If this occurs, the aero-flex cap should be removed and replaced by this genuine OEM replacement part. It is a simple repair process that will take only a short time to execute and will only require basic tools.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This aero-flex cap is compatible with the following outdoor appliance brands: MTD and Troy-Bilt.

This brush cutter is a genuine MTD part, sold individually. This brush cutter can be used as a replacement part in a string trimmer. The purpose of the brush cutter in a string trimmer is to clear grass and other greenery with more power than the usual blades attached to a string trimmer.The brush cutter in a string trimmer might need to be replaced if the blades attached to the brush cutter can no longer chop through greenery with the same force or with the same functionality as at its peak performance. If the brushcutter has been punctured, dented, warped, or eroded to the point of reduced functionality, the brush cutter should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This brush cutter is compatible with the following outdoor appliance brands: MTD.