Parts for Yard Machines 41CD26SC900: General Assembly Parts

This throttle housing & trigger assembly is a genuine MTD replacement part for a handheld gas lawn trimmer. A lawn trimmer is designed to cut grass, shrubs, bushes, and weeds. The throttle housing & trigger assembly is a kit containing a black plastic throttle housing, a trigger, a spring, and the screws to bind the pieces together. The function of a throttle housing is to house the throttle for the lawn trimmer, which spins the blades at specific velocities, with a full throttle corresponding to full blade velocity. The trigger assembly consists of the trigger itself, the hammer, the disconnector, and the springs, and the function of the trigger is to activate the engine, thereby engaging the throttle.In order to replace the throttle housing, the engine must not be running and the oil should be emptied from the tank. If the throttle housing & trigger assembly is damaged to the point that the lawn trimmer is unusable, the throttle housing & trigger assembly should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This throttle housing & trigger assembly is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Bolens. This part sold individually.

This throttle trigger spring is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD. This throttle trigger spring is designed for use with edgers or trimmers. It is compatible with products from brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.The throttle trigger spring part is crucial to the proper functioning of the throttle. The purpose of the throttle trigger spring is to help the throttle trigger to retract. The replacement or repair process of the throttle trigger spring should be straightforward, but a screwdriver and pliers will be necessary to complete the replacement. The user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This throttle trigger spring is made out of metal.

This throttle trigger is designed to open and close the throttle, or to control the speed of the engine. This part is mounted to the control handle on the equipment's shaft. With constant use, the throttle trigger may break or wear out. Use this genuine OEM throttle trigger in red to easily replace a damaged one. A screwdriver and long-nose pliers will be needed for the job. This OEM replacement throttle trigger is compatible with specific models of edgers and trimmers from Bolens, Craftsman, Cub Cadet, MTD, Ryobi, Troy-Bilt, and Yard-Man. It is sold individually.

This part is a replacement handle bracket assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken handle bracket assembly in line trimmers.This handle bracket assembly ensures that the line trimmer handlebars are securely and properly attached to the drive shaft. This part will require replacement if corroded, faulty, or broken in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this handle bracket assembly, the appropriate owner's manual and equipment diagrams should be referred to. This handle bracket assembly is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with line trimmer models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is an anti-rotation screw. The lower handle clip on many devices, including lawn and garden equipment and tools, holds an anti-rotation screw. With use, over time, or because of other damages, the screw may be broken or stripped. When this occurs, a replacement anti-rotation screw is required to keep the machine secured together correctly for safe use.The replacement of an anti-rotation screw is quick and easy. A Torx screwdriver is recommended for replacing the part. Allow the machine to cool completely before working with it. Wear protective gloves for safety always. Remove a stripped or worn out screw if there is one present before securing in the new part to the lower handle clip.This anti-rotation screw is a genuine OEM part. It is sourced from the manufacturer. The replacement part is sold as an individual unit. The piece is made from high-quality, durable metal. It can be used in a variety of brands, including Ryobi, Troy-Bilt, MTD, Bolens, Yard-Man, Yard Machines, and Cub Cadet. The anti-rotation screw is compatible with many models of blowers, cultivators, edgers, snowblowers, trimmers, vacuums, and other tools and lawn and garden equipment.

This coupler features a split-boom design that includes the knob, coupler, and the screws required to attach the upper shaft and lower boom before using the trimmer. Because of constant exposure and potential debris impacts, the coupler can become damaged over time and with regular use. The knob and screws can also become damaged or lost, which would require replacing the entire unit with an OEM replacement like the one here. This genuine OEM drive shaft coupler is manufactured by RYOBI and designed for use with their trimmers, as well as machines from MTD, Yard Man, Yard Machines, Bolens, Troy-Bilt, and Cub Cadet. It can also be used with select models of edgers and pruners from these brands. This coupler is sold as an individual assembly with all of the pieces required to complete the installation. The shaft is made of durable metal and the knob is a sturdy plastic piece. It will require a screwdriver with a Philips head to replace this part. Always wear gloves when working on lawn and garden equipment.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement in lawnmowers, snowblowers, string trimmers, pole pruners, and pole saws. The purpose of a screw in these devices is to affix and fasten components to one another through the process of rotation and piercing through the materials. A screw might have to be replaced in the standard lifespan of an outdoor appliance if it is lost, misplaced, or damaged. Check for punctures, tears, loosening, warping, or corrosion to the metal. This damage can stem from general wear and tear or from direct impact with a falling object or a surface. It can warp the component beyond repair, in which case it must be immediately removed and replaced with this genuine OEM replacement part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, Murray, and Yard Man.

This part is a replacement bolt. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken, stripped or defective bolt in outdoor power equipment.Bolts are important for holding together various components of the equipment. They are a standard piece of hardware that can become easily lost, stripped, corroded, or defective, requiring replacement. When working on or near an engine, it's important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this bolt, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality metal. This bolt can be used with different models of outdoor power equipment that have been manufactured by MTD, Craftsman, and other brands. Part sold individually.

A lower flexible drive shaft is located inside lawn trimmer attachments. It is mounted inside the lower boom housing. The function of the part is to drive the trimmer head. The drive shaft will deteriorate and become more round with use. The rounded ends will ultimately fail to engage the trimmer head. The lower flexible drive shaft may also break or kink. The trimmer head stops quickly when this occurs. The trimmer will no longer function properly, and a replacement part is required.When replacing the lower flexible drive shaft in a trimmer, wear protective gloves. Start by removing the trimmer head, reel, and line assembly. Use a screwdriver to remove the outer head. Remove the guard assembly. Remove the bushing housing assembly. Access the lower flexible drive shaft and remove the damaged part. Lubricate the new part and install it with the lower flexible drive shaft's ring closest to the trimmer head. Reassemble the trimmer.This replacement part is an OEM genuine part supplied by the manufacturer. The lower flexible drive shaft can be used in MTD, Cub Cadet, Troy-Bilt, and Craftsman brand lawn trimmers. The part is sold individually. The lower flexible drive shaft is made of durable materials.

This replacement part is a gearbox intended for use in grass trimmers. This is a genuine replacement part made by MTD. Gearboxes connect the main handle of the appliance to the rotating blade attachment. It is important that this part is secure as the blade cutter can be dangerous if loose. A new gearbox might be needed if the current one is broken or damaged in any way. It is not unusual for this part to require replacement after years of normal use as it's easy for the gearbox to become stripped down. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with grass trimmers made by MTD.

This screw and nuts set is a genuine MTD part, sold individually. This screw and nuts set can be used as a replacement part in a string trimmer. This set provides a variety of screws and nuts which serve as fastening components within the string trimmer.The screw and nuts set in a string trimmer might have to be ordered as a complete replacement part if one or more screws or nuts in the string trimmer has been lost, misplaced, or damaged. If this occurs, the screw and nuts set should be ordered as a genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This screw and nuts set is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Bolens, and Yard Man.

This part is a replacement cutting head assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective cutting head assembly on trimmers. The cutting head contains the cutting line that is used to trim plants and greenery. The cutting head experiences significant wear and tear over time, in particular, the cutting line itself. It will likely require replacement in the standard lifespan of the trimmer. It's advisable to wear work gloves to protect the hands. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this cutting head assembly, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this cutting head assembly is suitable for use on several models of trimmers manufactured by MTD, Troy-Bilt, Yard Machines, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.