Generator Engine

This is a breather assembly that is made for use on many types of lawn and garden equipment. The breather is an important component that helps vent extra air from the crankcase of the engine. If the engine on the equipment is no longer running well, it could be caused by a malfunctioning or broken breather assembly. If this is the case, the part will need to be replaced.Several tools are needed to replace the breather assembly. These include a 7/16th-inch socket, a 3/8th-inch nut drive or socket, a Phillips head screwdriver, a 5/16th-inch nut drive or socket, a 3/8th-inch nut driver or socket, and a pair of pliers. The muffler will need to be removed to gain access to the breather assembly. It can be inspected for damage before being removed. A new part can be installed to get the engine running at its best.This breather assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. It's sold as an individual component. This assembly is made for use with lawnmowers, chipper shredders, snowblowers, leaf blowers, generators, and pressure washers made by Briggs & Stratton, Cub Cadet, Toro, Craftsman, Lawn-Boy, and Simplicity.

This is a breather designed to be used on various types of lawn and garden equipment. The breather is an essential part that is responsible for venting out excess air from the engine's crankcase. If the equipment's engine isn't working as well as it used to, it could be related to a broken or damaged breather. In this situation, the breather will need to be replaced.Replacing the breather will require a socket set, a nut driver, a Phillips head screwdriver, and a set of pliers. Inspecting the breather or making a replacement starts with removing the equipment's muffler. This will give access to the original breather for visual inspection. If it has damage, it should be removed. The new part can be replaced before reassembling the tool.This breather is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The breather is designed to fit onto lawnmowers, snowblowers, tillers, generators, and wood chippers manufactured by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity.

This is a genuine replacement exhaust valve. The exhaust valve allows the engine to exhaust as needed. This part also includes the retaining ring, which holds the valve in place as it moves in and out to allow the exhaust to escape from the system. Over time and due to repetitive motion, this valve can break down or become damaged. A replacement will be necessary for proper operation of the machine. If the exhaust valve is faulty, the engine may not run correctly. It may not run at all. A replacement will ensure proper operation of outdoor equipment. Be sure to wear gloves and allow the engine to cool completely before doing any type of engine repairs. This OEM exhaust valve is manufactured by Tecumseh. It meets manufacturer standards for an OEM replacement and is compatible with several machines from the brand. The exhaust valve is sold as an individual part and does not include any additional parts or hardware. Those must be purchased separately.

This valve retainer is a genuine Tecumseh part, sold individually. This valve retainer can be used as a replacement part for a variety of small engine outdoor appliances including lawn mowers, snowblowers, tillers, generators, and wood chippers. The purpose of the valve retainer, also known as the valve spring keeper, is to control the flow of materials that pass through the valve so that the proper amount of the material that passes through is dispensed into the mechanisms of the appliance.If it seems as though the fuel or air flow is not being properly regulated by the outdoor appliance, the valve retainer should be inspected and assessed for signs of visible damage. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This valve retainer is compatible with the following outdoor appliance brands: Tecumseh, Toro, Craftsman, Cub Cadet, Briggs & Stratton, Lawn Boy, MTD, and Simplicity.

This genuine replacement governor gear is made to work in select small equipment engines designed for outdoor use. The governor gear is responsible for helping to govern the engine and control the speed. This gear is subject to repetitive motion and constant vibrations while the equipment is in use, which can cause it to wear down or become brittle over time. Some gears get lost in the process of other repairs. Without this gear, the machine will be unsafe to operate because there is no control over engine speed. This is why a genuine replacement with an OEM part like this model is necessary. This genuine OEM part is manufactured by Tecumseh. It is located inside of the crankcase and will require a wrench, socket set, pliers, and screwdriver to reach and replace. The governor gear is sold individually and includes a washer to secure it and ensure proper rotation and help provide additional securement. It is important to wear gloves and use caution when working on small internal engine parts like this. Allow the engine to cool completely before beginning any work.